Technitron Industries Navi Mumbai, Maharashtra

We are manufacturer and supplier of PCC Panel. We offer PCC panels which are used for diverse industrial applications and provide reliable and effective service. With best usage and productivity, these offer high controllability and also available at market leading prices. We offer superior quality PCC Panel to control power production and distribution.      Features :-  Panels will be suitable for 415 ± 6% volt, 3 phase (4 W + E) 50 HZ AC supply . They will be installed indoors and will work efficiently up to an ambient temperature of 50°C. All doors will be suitably labeled and marked for convenience of operation & maintenance.  Construction :- Type :  Single /double sided.Modular design, free standing and will have fixed or draw out type executions as many be desired. Finish: The entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements. Bus Bars:  Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Internal Wiring : Wiring be carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthing Bus : Bus Bars will be running all along the board. Switch Gears/ Components   Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. Standards: Our Panels confirms to the standards such as, IS 4237; IS 8623; IS 375    

This motor control center panels is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled.    Features :- Simplex & Duplex pattern. Degree of Protection :-IP-52 to IP-65. Painting: - Powder Coating / Spray Paint / Epoxy Paint. Compartmentalized design eliminates risk to maintenance personal. Sufficient space for incoming and outgoing cables. Provided with buzzer & hooter during emergency. Separate Bus bar and cable chambers. Motor Control Center shall have hinged door with lockable arrangement. Motor Control Center shall have detachable gland plates of 2-3mm thick. Motor Control Center Available with Aluninium / copper bus bar. Fabricated with 2/2.5/3mm CRCA sheet steel. Motor Control Center is suitable for use on 415V, 3Phase, 4 wire, 50H.z    Application :-   These are widely used for :- »  Protection against electrical Short Circuit, overload and earth fault of the system. »  Control & monitoring of the entire electrical system of an industry / plant. »  Systematic power catering to various load of an electrical system. »  Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open –cast mines, shopping 

Along with high level of skilled designers & programmers we also lead with high level of skill fabricators to achieve some of the most complex CONTROL DESK to suit our customer’s requirement.   Features :- Available in Floor mounting type. Degree of Protection :-IP-52 to IP-65. Painting: - Powder Coating, Spray Paint, Epoxy Paint. Compartmentalized design. Designed to accept 3-phase, 4 wire input volt. Provided with buzzer & hooter during emergency. Provided with 12/24 window annunciator for fault indication.    Application :-   These are widely used for :- »  Control & monitoring of various electrical motors, loads etc. of an electrical system. »  Protect against various electrical faults. »  Better & smooth trouble free electrical life of various electrical machines. »  Control Desk may save energy of an electrical system.

With our fully in-house setup as in Powder Coating and latest CNC machine, a dedicated team of programmers, designer, and operators work hard along with this state-of-the art machinery to offer complete solution to the customer. With 23Ton of punching force, 500 x 500 part shoot, 2.5Meter without repositioning machine along with wide range of tooling we are able to achieve critical componets with high accuracy amd minimum leadtime. Moreover availablity of In-house powder coating plant boosts our efficency and provides our customer with full soluton under one roof.

With our fully in-house setup as in Powder Coating and latest CNC machine, a dedicated team of programmers, designer, and operators work hard along with this state-of-the art machinery to offer complete solution to the customer.   With 23Ton of punching force, 500 x 500 part shoot, 2.5Meter without repositioning machine along with wide range of tooling we are able to achieve critical componets with high accuracy amd minimum leadtime. Moreover availablity of In-house powder coating plant boosts our efficency and provides our customer with full soluton under one roof.

Our product range of Bus Ducts is complete with CRCA / stainless steel / Aluminium as per customer requirement for ensuring their safety tear. We also provide Erection & Commissioning services for our product. We hold the expertise in design, engineering, & manufacturing of various types of bus ducts with a range up to 6300 ampere. Our range of bus ducts is well supported on SMC / DMC / FRP supports.   Perforated cable trays, cable channels and ladder cable trays and accessories are safe and economical solutions for supporting requirements of electric power, signal, control, instrumentation and communication cables in numerous applications and places like industrial facilities, hospitals, airports, tunnels, bridges etc. Standard widths of cable tray units are 50, 100, 200, 300 i 400 mm, custom ordered to 600mm. Standard lengths of a cable tray unit are 2000 and 2500mm, custom ordered to 3000mm. Perforated and ladder cable trays are made of quality zinced tin, and can be extra protected by hot zincing or powder coating.