Chennai, Tamil Nadu, India
Our Products
Technico Industrial type oven is a Triple walled chamber, inner made of stainless steel sheets and outer made of cold rolled mild steel sheets duly finished in powder coating. Inter space in between the walls is tightly packed with special grade glass wool. The middle wall will be made of Electro Galvanized steel.
Inner chamber accommodates perforated stainless steel trays at adjustable heights. Insulated double walled door in the front is provided with locking arrangements. Heating is by Kanthal A1 heaters evently distributed on the two sides / two sides and the bottom portion of the chamber for uniform heating.
Temperature is indicated and controlled by Digital temperatureindicator cum controller working in conjuction with FEK sensor within the operating range. Air circulating fan assembly is incorporated in the unit for maintaining uniform temperature inside the working chamber.
Built in control panel accommodating all electrical / electronic accessories is provided at the side of the chamber.
Technical Specification:
OPTIONS:
OTHER BIGGER SIZES CAN BE GIVEN ON REQUEST
The industrial Type oven can be provided with Trolley , Exhaust systems.
Techinco Thermostatically controlled model will be the same as above except that the temperature is a controlled by capillary thermostat in the hot zone. Adjustable air ventilator is provided at the top.
Built in front control panel accommodating pilot indicating lamps, thermostat and energy regulator located at the lower portion or at the right side of the chamber.
Technico CWB is a double walled chamber, inner made of stainless steel of 304 grade and outer made of thick gauge cold rolled mild steel sheets and attractively finished in powder coat paint. The inter space in between the walls is tightly packed with puff to avoid thermal losses. The chamber is provided with top opening lid made of stainless steel and provided with handle.
Evaporating coils are kept inside the inner chamber for faster cooling. The refrigeration system consisting of compressor, air- cooled condenser and accessories is provided at the lower portion of the bath.
The temperature is controlled by Digit ON /OFF temperature controller with an accuracy of 2 C. (The unit is fitted with a stirrer to re- circulate liquid in the tank to maintain uniform temperature inside the bath.) A FHP circulating pump to re- circulate liquid in the tank to an external source is also provided.
Built in control panel with indicator lights, ON / OFF switches, Digital ON/OFF controller etc. and is provided on the top portion of bath for operational convenience.
Optional - Stirrer
| Capacity (ltrs) | Chamber size | Rating (kw) |
| 12 | 200 x 220 x260 | 1.5 |
| 28 | 300 x 360 x 300 | 2.0 |
| 40 | 370 x 300 x 400 | 3.0 |
Technico HOT AIR OVEN is sturdy doubled wallwd on the back and two sides with interior walls made of stainless 304 sheets and exterior made of M.S. sheets. The doors will be doubled walled and seals against atmospheric infiltration gasket. The doors will be mounted in heavy duty hinges for eazy opening and closing.
Inter space in between the outer and middle wall is tightly packed with special grade glass wool. The outside skin temperature will be around 20 top 30 degs C above ambinent. The oven will be provided with required number of adjustable Trays.
Suitable heater is provided which will have much longer life. The heating system will be designed for max. 250 deg. C operation with uniform temperature all over the oven chamber.
An Air circulation fan with a suitable motor mounted at the back for ensuring uniform temperature throughout the heating chamber. The temperature inside the chamber is controlled by a digital temperature indicator, cum controller which will work in conjunction with a thermo couple
A control panel with Digital indicator cum controller, Air circulating fan starters, indicators lamps for line and load, mains switch, fuse etc is provided.
Technical Specification:
OPTIONS:
TLPPL 103 TECHNICO BOD INCUBATOR
Technico BOD Incubator is a double walled chamber with interior made of stainless steel of 304 grade & exterior made of cold rolled mild steel finished in Epoxy powder coating. Insulation is by special grade glass wool. Removable stainless steel trays are provided at adjustable height.
Double door system, with inner acrylic door for full view of the inner chamber & outer double walled insulated door provided with lock & key arrangement.
Temperature is controlled by a digital ON/OFF controller with RTD sensor. A circulating fan assembly is incorporated in the unit for uniform temperature inside the chamber. Alternatively microprocessor based PID controller can be provided.
Inside illumination is provided by fluorescent tube lights.
CFC free refrigeration system by emersion cope land compressor, Air cooled conditioner & accessories provided at bottom of the chamber.
The control panel consists of digital temperature controller, indicating lamps, ON/OFF switch etc. is provided at the bottom. The unit is mounted on smooth/free moving 4 nos. castor wheels for easy mobility.
Technical specifications :
| Inner chamber size (mm) | Capacity (cubic ft.) | Capacity (lts.) | No. of trays (ea) | Power rating (kw) |
| 455 x 415 x 610 | 4.0 | 112 | 2 | 1.0 |
| 500 x 415 x 800 | 6.0 | 116 | 2 | 1.5 |
| 570 x 550 x 870 | 10.0 | 280 | 3 | 1.5 |
| 650 x 550 x 900 | 12.0 | 335 | 3 | 2.0 |
| 700 x 650 x 900 | 15.0 | 420 | 3 | 2.5 |
We can supply other BOD sizes like MINI or extra LARGE, as may be required by users.
Optional Extra
Techno digitally controlled model bacteriological lab incubator is a double walled chamber with interior made of SS 306 grade sheets & exterior made of cold rolled mild steel sheets finished in epoxy powder coating. Inter space in between walls is tightly packed with glass wool to minimize radiation heat loss. The inner chamber accommodates SS perforated trays at adjustable height. A double walled insulated door mounted on heavy duty hinges & provided with locking arrangements.
Temperature is controlled by a digital temperature controller working in conjunction with PT100 sensor housed in the hot zone.
Air circulating fan assembly driven by suitable motor is incorporated in the unit of maintaining uniform temperature inside the working chamber. Adjustable air ventilator is provided at the top.
Built in front control panel accommodating pilot indicating lamps, ON/OFF switch, digital controller are located at the lower portion or at the right side of the chamber.
OPTIONAL:
| Inner chamber (LxBxH) mm | Capacity | Power rating (W) |
| 300 x 300 x 300 | 2.0 | 150 |
| 350 x 350 x 350 | 2.0 | 150 |
| 450 x 450 x 450 | 2.0 | 200 |
| 450 x 450 x 600 | 2.0 | 200 |
| 600 x 600 x 600 | 3.0 | 400 |
| 600 x 600 x 900 | 3.0 | 400 |
Technico Humidity Test chamber is a double walled chamber. The inner chamber is made up of 304 stainless steel material with mirror finish. The outer wall is made of mild steel with powder coating finish or alternatively stainless steel 304 with or without epoxy powder coating finish for excellent looks.
The chamber is provided with a doubled walled door with a toughened glass viewing window which allows inspection of samples without disturbing the temperature inside the chamber. The door is mounted on heavy duty plate hinges with effective locking arrangement & seal against atmospheric infiltration by resilient magnet gasket. A second door made of clear Acrylic will be provided mounted on SS hinges and with magnetic catch to enable full visibility of the inner chamber keeping minimum loss of the test process conditions.
The inner space in between the inner and outer wall is insulated and tightly packed with PUF to ensure effective thermal sealing.
Heating elements are made from imported nichrome wires evenly distributed at the back side of the chamber.
Forced air circulation fan assembly is incorporating heavy duty sealed CFC free compressor of Emerson compressor of emersion cope land make having condenser reservoir, cooling fan assembly and filled with suitable Refrigerant gas which will be circulated throughout the inner chamber for effective uniform temperature upto 20 deg. C. Cooling system is provided of the bottom portion of the chamber.
The RH / Humidity can be controlled from 45 % RH to 95 % RH in the temperature range of 20 to 60 degs C. The RH is control within the range by a smart Microprocessor base PID controller with RH sensor.
Technical Specification:
Options:
Timer, voltage stabilizer, Programmable controller, Recorder, PC interface small & bigger sizes also available based on request.
| Standard Chamber size (L ) x ( W) x (H) mm | Power Rating kw |
| 455 x 455 x 710 | 3.0 |
| 605 x 605 x 605 | 4.5 |
| 605 x 605 x 910 | 4.5 |
Technico Egg incubator is a doubled walled chamber, outer made up of M.S. Sheet, finished in powder coating & inside made of stainless steel sheets.The inter space between inner & outer wall is packed with high grade glass wool.
Temp. ranges from ambinent + 5 C to 70 C and is controlled by Digital temp controller with an accuracy of 1 C. The unit is provided with air circulating fan and a manual tray tilting device, so as to tilt the tray holding the eggs. Supplied with control panel. Designed to work on 220 / 230 VAC supply.
| Capacity (eggs) | Rating- Kw |
| 50 | 50 |
| 100 | 150 |
| 200 | 200 |
| 250 | 200
|
Same as above but provided with additional RH / Humidity control system.
Optional:
Microprocessor based digital PID temperature controller with sensor automatic fitting with timer.
| Capacity (eggs) | Rating- Kw |
| 50 | 1.75 |
| 100 | 2.0 |
| 200 | 2.2 |
| 250 | 2.5 |
The inner chamber accommodates one no. easily removable stainless steel tray at adjustable height and is provided with a shaking platform with threaded stainless steel clamps for holding conical flasks from 250 ml to 1000 ml capacity. Illumination inside the chamber is provided by fluorescent tubes.
An outer double door with inner full view acrylic door permits inspection of specimens. Heating is by Kanthal A1 Coils. Temp. is controlled by a digital indicator cum controller working in conjunction with PT 100 sensor. Powerful air circulator creates positive air flow through the incubator.
Evaporating coils are placed at the rear side of the inner chamber. CFC free refrigeration system includes Emerson Copeland make hermetically sealed compressor air cooled condenser unit and accessories. Refrigeration System is provided at the lower potion of the chamber.
The shaker is driven by a variable DC motor with variable speed control. The speed is indicated RPM indicator for digital display of speed with present facility. The control panel accommodating, digital controller, pilot indicating lamps, On / off switches, digital RPM indicator, etc, will be provided at the top of the unit. Supplied complete with one no. shaking platform.
TECHNICAL SPECIFICATIONS:
OPTIONAL:
Technico environmental / stability chamber is a doubled walled chamber. The inner chamber is made of 304 stainless steel material with mirror finish. The outer wall is made of mild steel with powder coating finish or alternately stainless steel 304 with or without epoxy powder coating finish for excellent looks.
This is a double walled construction, interior made of thick gauge stainless steel sheets of 304 grade and exterior made of cold rolled mild steel sheets finished in powder coat. Inter space in between the walls is packed with glass puff. The door is doubled walled having toughened glass window and seals against atmospheric infiltration by rubber gasket. The inner chamber accommodates stainless steel trays at adjustable height.
Heating elements are made of nichrome heating coils evenly distributed at the back side of the chamber. Forced Air circulation fan assembly is incorporated to maintain uniform temperature inside the working chamber.
Temperature below ambient is achieved by refrigeration system consists of evaporator coils, compressor, condenser, fan motor and accessories.
Humidity is attained by the mist of water that is circulated inside the chamber for maintaining 40 % to 95 % humidity. A water reservoir will be provided with auto law level water cut off device and alarm.
Humidity is controlled by a microprocessor based PID humidity controller, with sensitivity of 3 %. Temperature below controlled by microprocessor based PID temperature controller from + 10 to 60 C with an accuracy of 1 C.
A compact control panel with switches, indicating lamps, digital PID controllers etc, is located at the side of the chamber for operational convenience.
Illumiation is provided with Fluroscent lamps with cyclic timer.
Technical Specification:
Options:
Timer, voltage stabilizer, Programmable controller, Recorder, PC interface small & bigger sizes also available based on request.
| Standard Chamber size (L ) x ( W) x (H) mm | Power Rating kw |
| 455 x 455 x 710 | 3.0 |
| 605 x 605 x 605 | 4.0 |
| 605 x 605 x 910 | 4.5 |
