Product ID: 1118 Proximity RFID Reader Module has an inbuilt antenna. Designed to work on the industry standard carrier frequency of 125 KHz Sensitivity Range is about 6cm from antenna. Internal antenna on the PCB Buzzer to detect the proximity cards Blue LED blinking to show that the RFID reader is powered on. Direct TTL output that can be directly coupled with most of the microcontrollers without max232. Operates at 5v with 500ma of current Microcontroller to decode the data into Serial o/p RS232 to convert signal into TTL to RS232 (optional) The LF module is best suited for applications in Access Control, Time and Attendance, Asset Management, Handheld Readers, Immobilizers, and other RFID enabled applications.

Product ID: 1228 This is a low frequency (125 KHz) RFID Reader with TTL Output RFID Reader TTL 125 KHz mini-modules is designed for reading code from 125 KHz card compatible read-only tags and read card. It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. Support external antenna Operating voltage: 5v Maximum effective distance: up to 150mm Less than 100ms decoding time URAT interface Small outline design

Product ID: 1105 MF522-A module uses MFRC522 original chip design circuit card reader, easy to use, low cost, and suitable for equipment development, the development of advanced applications reader users, the need for RF card terminal design / production users. This module can be directly loaded into the variety of reader molds. Voltage: DC 3.3V Operating Current: 13-26mA Operating Frequency: 13.56MHz Supported card types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire Module Interface SPI Data Transfer Rate: Max. 10Mbit/s Card reading distance 030mm

Product ID: 1118 Proximity RFID Reader Module has an inbuilt antenna. Designed to work on the industry standard carrier frequency of 125 KHz Sensitivity Range is about 6cm from antenna. Internal antenna on the PCB Buzzer to detect the proximity cards Blue LED blinking to show that the RFID reader is powered on. Direct TTL output that can be directly coupled with most of the microcontrollers without max232. Operates at 5v with 500ma of current Microcontroller to decode the data into Serial o/p RS232 to convert signal into TTL to RS232 (optional) The LF module is best suited for applications in Access Control, Time and Attendance, Asset Management, Handheld Readers, Immobilizers, and other RFID enabled applications.

Product ID: 1228 This is a low frequency (125 KHz) RFID Reader with TTL Output RFID Reader TTL 125 KHz mini-modules is designed for reading code from 125 KHz card compatible read-only tags and read card. It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. Support external antenna Operating voltage: 5v Maximum effective distance: up to 150mm Less than 100ms decoding time URAT interface Small outline design

Product ID: 1105 MF522-A module uses MFRC522 original chip design circuit card reader, easy to use, low cost, and suitable for equipment development, the development of advanced applications reader users, the need for RF card terminal design / production users. This module can be directly loaded into the variety of reader molds. Voltage: DC 3.3V Operating Current: 13-26mA Operating Frequency: 13.56MHz Supported card types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire Module Interface SPI Data Transfer Rate: Max. 10Mbit/s Card reading distance 030mm