The Rubber Bonded Flexible Couplings we deliver, are manufactured using galvanized iron and available in different sizes, ranging from DN80-DN2600. The offered lot is reckoned for its quality and reliability as it is prepared using the best available resources. Also, we make sure that the material is sourced from the certified places. We have hired a team of professionals who hold immense knowledge of packaging. They make use of premium packaging material so as to make damage free deliveries.

Introduction

• The TS and TSS are highly durable rubber elements offering remarkable flexibility in all directions.
• These are essentially consist of highly flexible steel lamination and fabric reinforced diaphragm designed to transmit very high torque while compensating for Axial, Redial and Angular shaft dis-placement either in single or in combination.
• High damping characteristics and low dynamic torsional stiffness result low frequency drive system, ensuring that critical speeds remain below operational speeds .

Industry Application :

• Marine : Main Propulsion and Auxiliary Drives.
• Cement : Raw Mill , Coal Mill , Cement Mill , Fan.
• Thermal Power : Blow Mill , Conveyor , Crusher.
• Others : Compressor , Generator , SDL , UDM , Locomotive etc.

Split type rubber element also available for Raw Mill , Coal Mill etc.

Introduction

• This is modified form of the protected type flange coupling.
• This type of coupling has pins and it works with coupling bolts.
• The rubber bushes are used over the pins.
• The coupling has two halves dissimilar in construction.
• The pins are rigidly fastened by nuts to one of the flange and kept loose on the other flange.
• This coupling is used to connect shafts which having a small parallel misalignment, angular misalignment or axial misalignment.
• In this coupling the rubber bushing absorbs shocks and vibration during its operations.
• This type of coupling is mostly used to couple electric motors and machines.

Salient Features

• Frequently, the coupling is used to connect the gear shaft to the driven machine.
• Up to 96 KNm; 548 in.lbs.
• 80 or 90 shore hardness close fitting flexible elements.
• Steel or cast iron hubs.
• Brake drum or disc available as well as special designs.
• Simple Assembly.

Advantage :

• Flexible fail-safe pin and bush coupling for medium up to high torques.
• Low weights and mass moments of inertia.
• Independent of direction of rotation (suitable for reversing operation).
• Suitable for plug-in assembly (blind assembly, bell housing installation).
• Can be used in potentially explosive atmospheres.

Our Compressor Couplings are renowned for their high-durability and impressive performance. We effortlessly dispatch the product basket to the clientele as we have excellent, wide connectivity and trusted shipping facilities. We have hired experienced personnel to handle and supervise the task of packaging in a systematic order. Thus, there are minimal chances of damage from our end as our experts check the entire lot before dispatch.

Flexible Coupling available for various compressors

Introduction

• The TAC/TVN coupling is an axial pluggable highly flexible coupling developed for a variety of different applications.
• This disc element is vulcanized at its inner radius, the outer radius is connected to the flanged casing by a plug-in toothing.
• This toothing provides the axial plug-in feature and compensation of shaft displacements.

Salient Features

• High damping character.
• Max. Axial redial angular misalignment.
• No lubrication.

Advantage :

• Maximum flexibility is provided by different coupling designs installation in bell-type housings or free-standing installations, designed with single or dual arrangement of natural rubber or silicone.
• There is an extremely compact design for high power density.
• This spline enables axial engagement with ease of assembly.
• Integrated supporting rings protect the spline against slipping through or developing cracks in the gearing teeth.

Ecd Rubber Bonded Flexible Coupling : ECD type coupling is a combination ofmetal & rubber bonded flexible suitable for high torque transmissions.

By keeping records of the clients' requirements, we have developed a system that offers several options for transferring money from one end to another. With the aid of diligent team of professionals and brilliant packaging system, we are able to meet standard as well as tailored packaging requirements of the patrons.

Introduction :  TC introduces unique replacement for Gear Coupling.The TBC type coupling constructed by Cast Steel and Heavy duty Rubber Blocks.Rubber blocks are available in different stiffness to match the application requirement.

Industry Applications :

• Mines- Conveyor, Crusher, Feeder Breaker.
• Cement- Raw Mill, Coal Mill, Cement Mill, Fan.
• Thermal Power - Bowl Mill, Conveyor, Crusher.
• Others- Fans, Pumps, Compressor, Generator etc.

Salient Features :

• Severe shock load protection avoiding failure of the driveline under high transient torques.
• Intrinsically fail safe ensuring continuous operation of the driveline in the unlikely event of rubber failue or damage.
• Maintenance free with no lubrication or adjustment required resulting in low running costs.
• Vibration control achieving low vibratory loads in the driveline components by selection of optimum stiffness characteristics.
• Zero backlash eliminating torque amplifications through pre -compression of the rubber elements.
• Misalignment capability allows axial and radial misalignment between the driving and driven.
• Future Replacement parts is the only Rubber Blocks & Replacement time is very low.

This coupling segment is a combination of rubber & fabric that provide an exceeding high power density , which causes optimal damping & directional flexibility.

Salient Features

• The TF Coupling is Highly Flexible Coupling.
• Its special advantage is the transmission of high torque.
• Its allows the simple connection of flange.
• TF Coupling is designed for application with piston engines.
• No need for lubrication.
• High Vibration Damping.
• Very low torsional stiffness.

The Rubber Bonded Flexible Couplings we deliver, are manufactured using galvanized iron and available in different sizes, ranging from DN80-DN2600. The offered lot is reckoned for its quality and reliability as it is prepared using the best available resources. Also, we make sure that the material is sourced from the certified places. We have hired a team of professionals who hold immense knowledge of packaging. They make use of premium packaging material so as to make damage free deliveries.

Introduction

• The TS and TSS are highly durable rubber elements offering remarkable flexibility in all directions.
• These are essentially consist of highly flexible steel lamination and fabric reinforced diaphragm designed to transmit very high torque while compensating for Axial, Redial and Angular shaft dis-placement either in single or in combination.
• High damping characteristics and low dynamic torsional stiffness result low frequency drive system, ensuring that critical speeds remain below operational speeds .

Industry Application :

• Marine : Main Propulsion and Auxiliary Drives.
• Cement : Raw Mill , Coal Mill , Cement Mill , Fan.
• Thermal Power : Blow Mill , Conveyor , Crusher.
• Others : Compressor , Generator , SDL , UDM , Locomotive etc.

Split type rubber element also available for Raw Mill , Coal Mill etc.

Introduction

• This is modified form of the protected type flange coupling.
• This type of coupling has pins and it works with coupling bolts.
• The rubber bushes are used over the pins.
• The coupling has two halves dissimilar in construction.
• The pins are rigidly fastened by nuts to one of the flange and kept loose on the other flange.
• This coupling is used to connect shafts which having a small parallel misalignment, angular misalignment or axial misalignment.
• In this coupling the rubber bushing absorbs shocks and vibration during its operations.
• This type of coupling is mostly used to couple electric motors and machines.

Salient Features

• Frequently, the coupling is used to connect the gear shaft to the driven machine.
• Up to 96 KNm; 548 in.lbs.
• 80 or 90 shore hardness close fitting flexible elements.
• Steel or cast iron hubs.
• Brake drum or disc available as well as special designs.
• Simple Assembly.

Advantage :

• Flexible fail-safe pin and bush coupling for medium up to high torques.
• Low weights and mass moments of inertia.
• Independent of direction of rotation (suitable for reversing operation).
• Suitable for plug-in assembly (blind assembly, bell housing installation).
• Can be used in potentially explosive atmospheres.

Our Compressor Couplings are renowned for their high-durability and impressive performance. We effortlessly dispatch the product basket to the clientele as we have excellent, wide connectivity and trusted shipping facilities. We have hired experienced personnel to handle and supervise the task of packaging in a systematic order. Thus, there are minimal chances of damage from our end as our experts check the entire lot before dispatch.

Flexible Coupling available for various compressors

Introduction

• The TAC/TVN coupling is an axial pluggable highly flexible coupling developed for a variety of different applications.
• This disc element is vulcanized at its inner radius, the outer radius is connected to the flanged casing by a plug-in toothing.
• This toothing provides the axial plug-in feature and compensation of shaft displacements.

Salient Features

• High damping character.
• Max. Axial redial angular misalignment.
• No lubrication.

Advantage :

• Maximum flexibility is provided by different coupling designs installation in bell-type housings or free-standing installations, designed with single or dual arrangement of natural rubber or silicone.
• There is an extremely compact design for high power density.
• This spline enables axial engagement with ease of assembly.
• Integrated supporting rings protect the spline against slipping through or developing cracks in the gearing teeth.

Ecd Rubber Bonded Flexible Coupling : ECD type coupling is a combination ofmetal & rubber bonded flexible suitable for high torque transmissions.

By keeping records of the clients' requirements, we have developed a system that offers several options for transferring money from one end to another. With the aid of diligent team of professionals and brilliant packaging system, we are able to meet standard as well as tailored packaging requirements of the patrons.

Introduction :  TC introduces unique replacement for Gear Coupling.The TBC type coupling constructed by Cast Steel and Heavy duty Rubber Blocks.Rubber blocks are available in different stiffness to match the application requirement.

Industry Applications :

• Mines- Conveyor, Crusher, Feeder Breaker.
• Cement- Raw Mill, Coal Mill, Cement Mill, Fan.
• Thermal Power - Bowl Mill, Conveyor, Crusher.
• Others- Fans, Pumps, Compressor, Generator etc.

Salient Features :

• Severe shock load protection avoiding failure of the driveline under high transient torques.
• Intrinsically fail safe ensuring continuous operation of the driveline in the unlikely event of rubber failue or damage.
• Maintenance free with no lubrication or adjustment required resulting in low running costs.
• Vibration control achieving low vibratory loads in the driveline components by selection of optimum stiffness characteristics.
• Zero backlash eliminating torque amplifications through pre -compression of the rubber elements.
• Misalignment capability allows axial and radial misalignment between the driving and driven.
• Future Replacement parts is the only Rubber Blocks & Replacement time is very low.

This coupling segment is a combination of rubber & fabric that provide an exceeding high power density , which causes optimal damping & directional flexibility.

Salient Features

• The TF Coupling is Highly Flexible Coupling.
• Its special advantage is the transmission of high torque.
• Its allows the simple connection of flange.
• TF Coupling is designed for application with piston engines.
• No need for lubrication.
• High Vibration Damping.
• Very low torsional stiffness.