Tarway Overseas

Mangolpuri, Delhi

Quality Mica, The Quality Mica offered by us, is highly acclaimed among the buyers due to its superior quality and reliable performance.

Knife or scissor dressed sheet mica with irregular shape and a minimum thickness of 0.18 mm (0.007inch or 7 mils) are called Mica Blocks. Block Mica are classified into thirteen size groups (ranging fromOOEE Special down to No. 7) and obtained in size as large as 30 - 35 cm sq. (12 - 14 inches sq.) beyondwhich is practically rare and far too expensive. It is available in sheets with both random (natural) and calibrated thickness as per demand. After undergoing size and quality grading, Mica Blocks areexported.

Corrugated or Crimped Mica is prepared by passing through a specially designed rolling machine. It is supplied in the form of vertically corrugated ribs and mainly used in wrapping the soldering ironelectrodes. It plays important role to eliminate physical contact between the resistance wire and copper bit ensuring dependable service life.

Mica Paper Plates are manufactured from mica paper bonded with heat resistant silicone resin consolidated under controlled heat and pressure to form rigid plates. In this process, the binder is completely cured. Characterised by excellent mechanical, thermal and electrical properties. It emits very little smoke at excessive temperatures. It provides uniform thickness and excellent punching capability. Application : Ideally used in heating elements for domestic and industrial electrical appliances. Custom built fabricated parts are also extensively used in many insulating and thermal enduring applications.

Metal casting foundries pour their melts through Mica Strainer Core to eliminate impurities and control the pour rate. Mica Strainer Core having 22 to 148 holes acts both as a choke and strainer during pour. MICA STRAINER CORES are suitably used by metal casting foundries for brass , bronze and aluminium sand castings as well as , for some smaller ferrous castings to pour their melts through mica strainer cores to catch impurities and control the pour rate. MICA STRAINER CORES acts both as a choke and strainer during puor helps to eliminate gating costs, dross, contamination, reduces polishing belt costs, and also, and also produces a better and brighter castings. MICA STRAINER CORES can easily be placed over the sprue hole, no recess needed, and provide easy excess to skim off with 100% metal recovery in remelt. The are a thin, inorganic , non-conteminating non-moisture absorbent material which provide easy handling and storing.

We fabricate very high quality mica components at the industries most competitive prices. We custom fabricate our mica components to your exact specifications or samples with a strong emphasis on assuring the best quality and best accuracy. Whether your order is small or large, our turn-around time is short.

Mica Paper Plate or Heater Mica Plate are ideally suitable as base, support and covering plates for heating elements. They are the versatile solution for a number of domestic and industrial applications.Made of high resistance Nickel-Chrome (NiCr) or Ferro-Chrome (FeCr) wire winded around Mica Paper Plate. It is available in all dimensions, patterns and designs in different voltage and wattage as per specifications.Mica insulated heating elements have established to be a reliable performer providing long, efficient and dependable service life because of apparent distinctive thermal and electrical properties.

Microscope Mica of superior high quality in extremely thin sheets having an outstanding even surfaces and uniform layers, transparent, scratch-free are suitably used in MICROSCOPE SLIDES for scientific research in laboratories. In this particular application only the thinnest mica, exposing 'virgin' mica upon each peeling, precision punched to specified size and thickness are used. They are mounted above the eyepiece of the microscope in such a way that the large mirror and a small prism bring the transparent objects sandwitched between mica into the same view.

Nichrome (NiCr alloy) is brand name for a nickel-chromium resistance wire, a non-magnetic alloy of nickel and chromium. A common alloy is 80% nickel and 20% chromium, by weight, but there are many others to accommodate various applications.

The products are widely used in electric current provider, power switch, computer, telephone, home appliance, communication products, all kind of instrument and electronic and electric components, motor and all kinds of small home appliance.

SPECIFICATION:
Power: 1000w. Singlecooking plate of 15.5 cm. On/off indicator light. Adjustable temperature control. Auto_thermostat with enamel finished. Gift box: 26*24.5*8 cm. Qty: 10 pcs/carton. G.W:17 KGS. N.W:16 KGS. QTY: 4800 pcs/20'; 9600 pcs/40'; 10800 pcs/40HQ.

We are the main supplier of this product.

We are the main supplier of this product.

We are the main supplier of this product.

Our customers can purchase from us a wide range of Elements for Electric Irons. These are high grade ribbons and have good resistance against temperature. Moreover, these also have a longer life & can bear extensive wear and tear. Also, these are used as insulation covers for conserving energy, flexibility for easy installation & are used in Electrical Household appliances.

We have in-store for our customers Elements for leaf plates. Made from high quality mica, mica paper board and high grade ribbons, these are used for electric kettles and leaf plate making machines. Designed by expert engineers, these have good resistance against corrosion. Also, our customers can purchase these at industry leading prices.

Knife or scissor dressed sheet mica with irregular shape having a specified thickness range between 0.05 to 0.18 mm (0.0020.007 inch or 27 mils) are classified as Mica Thins. It is used to manufacture various kinds of fabricated mica.

• Top quality pieces of mica blocks
• Used in different industrial segments
• Ideal for meeting manufacturing demands
• Available in small and bulk

• quantity

Thickness Range : Between 2 mils to 7 mils

Are manufactured from mica paper to tape form and bonded with various heat resistive resins according to technical requirement and application. The tapes are reinforced with several different backing materials on one side or both sides. Depending upon the percentage level of binder present, these tapes are termed "Resin Rich" or "Resin Poor". Under heat and pressure, the resins are cured to form protective covering and mechanical stability. Are characterised by excellent thickness uniformity, good thermal properties high dielectric strength and high tensile strength.

Made from mica splittings bonded with shellac or other variety of resins. The percentage of binder content is kept relatively low. These plates are rigid, hard and dense. They possess excellent punching ability to any specified shape and design.
Application: Used for heating elements in electrical appliances, furnace insulation, washers for high temperature applications, heat barriers, etc.

Pearlz, a range of aesthetically designed modular plate switches that are engineered to deliver protection and built to last. A well-designed knob provides soft operation and the ultra-tech mechanism ensures longevity. Pearlz promises quality and reliability.

Tubular Element using steel, stainless steel, Incoloy, inconel or titanium alloys, tubular elements are often regarded as the foundation of all heating elements. These heating elements have a strong outer sheath to help protect the heater from physical stress and uses high quality alloys to allow efficient heat transfer from resistance coil to your heating medium.

Made from mica splittings bonded with modified shellac or other resins. Moulding plates are rigid at room temperature but softens when heated at temperature between 100 to 140C. They contain relatively high level of binder content to have necessary flexibility for easily moulding into any desired shape upon heating. On cooling, they will regain rigidity and retain the shape of moulded forms.
Application : Are chiefly used for the manufacture of commutator V-rings and cones, end-caps, channels, angles, bushings, decorative lamp shades, etc.

Precision punched mica parts according to specific shapes and dimensions are used as mounting washers and reliable insulators in power transistors, diodes, IC's, heat sinks, rectifiers and other semiconductor devices. It helps the semiconductors to be insulated from the chassis, dissipate the heat away and keeps them cool.

• Designed by experienced technocrats
• Fabricated from premium quality mica
• Available in various sizes
• Can also be made as per clients

• demands

Uses :-Used in all types of appliances

Mica Shields are used with flat transparent sight glasses in water and liquid level gauges and columns of high pressure steam boilers. Mica Shield provides protection, retains basic strength and increases service life of sight glasses when used at extreme steam pressure and high working temperature. It is used as an ideal transparent medium for monitoring the liquid level and pressure of steam.

• Top quality
• Excellent for commercial uses
• Precision punched
• Available in customer specified sizes, thickness and shapes

Used for :-

• Liquid & water-level gauges of steam boilers
• HP boiler gauge glass kits, etc.

The Electronics Industries has a great use of Mica washers and insulators for both electrical and heat insulation. These various shapes of transistor Mica can increase the efficiency of products due to the excellent properties of Mica.

• Improved efficiency
• Suitable for both electrical and heat insulation
• Prevent excessive heat
• Available in various shapes
• Reflects excellent properties of mica