Target equipments

Eachanari, Coimbatore, Tamil Nadu

We are considered as one of the most prominent Industrial Cooling Tower Nozzle Suppliers in national as well as international markets. Our Cooling Tower Nozzle is highly efficacious that enhances the performance of the Cooling Tower. However, our FRP Cooling Tower Nozzle is made up of quality raw materials due to which it renders trouble free performance for longer period of time.

Dry Cooling towers are produced in forced draught and induced draught designs, and in single and multi-fan arrangements, depending customer specifications and requirements, We are the professional dry cooling tower and air cooled condenser manufacturers, tubes in copper and fins are aluminium MOC we use 58 or 38 OD copper tubes as per customer specification, all tubes are well expanded tested for pressure and leak.

Fin Type Cooler are produced in forced draught and induced draught designs, and in single and multi-fan arrangements, depending customer specifications and requirements, We are the professional Fin Type Coolerand air cooled condenser manufacturers, tubes in copper and fins are aluminium MOC we use 58 or 38and OD copper tubes as per customer specification, all tubes are well expanded tested for pressure and leak.

Chilled water is used to cool and dehumidify air in mid to large size commercial, industrial facilities like Water chillers can be either water cooled chiller or air cooled chiller Whenever a chiller's heat rejection can be used for a productive purpose, in addition to the cooling function.

Water Cooled Chillers : Water cooled chillers are typically indoor installation and operation, its are cooled by a separate condenser water loop and connected to outdoor cooling towers to expel heat to the atmosphere.

Air Cooled Chiller: Air Cooled chillers are intended for outdoor installation and operation. Air cooled machines are directly cooled by ambient air being mechanically circulated directly through the machine's condenser coil to expel heat to the atmosphere.

Quality Control:

Our chillers are compact design covering minimum floor area. low cost maintenance, break throw technology and long life serviceability Chilled water temperature can range from 1.5C to 7C We manufacturing chillers range from 0.5 TR to 250 TR

Function Of Industrial Chiller

• The industrial chillers are normally packaged, complete and closed-loop systems Include the condenser, pumps, chiller, temperature control systems and associated valves.
• Circulates water or any other coolant at constant pressure and temperature. The coolant flows from the chiller to the point of application and back again.
• Refrigeration is used as the cooling process in most of the industrial chillers. Some depend on air or water that flows over the coils containing a specific coolant in order to regulate the temperature.
• The coolant that is used most commonly in process chillers is water, though coolant mixtures are employed frequently. The latest development in industrial water chillers is the utilization of water cooling rather than air cooling.
• The condenser cools the refrigerant with water and not air.
• A cooling tower cools the air, thus reducing the need for energy as well as the chiller size. This is because of the condenser's small surface area and the lack of cooling fans which minimizes the noise levels too.

Industry Chiller Application

Chilled water or other liquid from the chiller is pumped through process or laboratory equipment. Industrial chillers are used for controlled cooling of products, mechanisms and factory machinery in a wide range of industries like.

• Plastic industry in injection and blow moulding,
• Metal working cutting oils, welding equipment,
• Die-casting and machine tooling, chemical processing,
• Pharmaceutical formulation,
• Food and beverage processing,
• Paper and cement processing,
• Vacuum systems
• X-ray diffraction
• Power supplies and power generation stations, analytical equipment, compressed air and gas cooling.
• Target chiller used to cool high-heat specialized items such as MRI machines and lasers, and in hospitals, hotels and campuses.
• The chillers for industrial applications can be centralized,
• Decentral chillers are usually small in size (cooling capacity), usually from 0.2 tons to 10 tons. Central chillers generally have capacities ranging from 10 tons to 100

Specifications

When determining industrial chiller specifications, the following aspects need to be taken into consideration:

• Source of power
• Chiller rating
• Capacity of the evaporator and condenser
• Cooling capacity of the chiller
• Type of the evaporator
• Ambient temperature
• Material of evaporator and condenser
• Type of fan
• Expectations of efficiency
• Materials of plumbing and piping
• Limits of noise level
• Number of compressors and their type
• Number of circuits
• Fluid leaving temperature
• Coolant requirements
• Type of refrigerant

Water Cooled Chillers : Water cooled chillers are typically indoor installation and operation, its are cooled by a separate condenser water loop and connected to outdoor cooling towers to expel heat to the atmosphere.

Quality Control:

Our chillers are compact design covering minimum floor area. low cost maintenance, break throw technology and long life serviceability Chilled water temperature can range from 1.5C to 7C We manufacturing chillers range from 0.5 TR to 250 TR

Function Of Water Cooled Chiller

• The Water cooled chillers are normally packaged, complete and closed-loop systems Include the condenser, pumps, chiller, temperature control systems and associated valves.
• Circulates water or any other coolant at constant pressure and temperature. The coolant flows from the chiller to the point of application and back again.
• Refrigeration is used as the cooling process in most of the industrial chillers. Some depend on air or water that flows over the coils containing a specific coolant in order to regulate the temperature.
• The coolant that is used most commonly in process chillers is water, though coolant mixtures are employed frequently. The latest development in industrial water chillers is the utilization of water cooling rather than air cooling.
• The condenser cools the refrigerant with water and not air.
• A cooling tower cools the air, thus reducing the need for energy as well as the chiller size. This is because of the condenser's small surface area and the lack of cooling fans which minimizes the noise levels too.

Water Cooled Chiller Application

Chilled water or other liquid from the chiller is pumped through process or laboratory equipment. Industrial chillers are used for controlled cooling of products, mechanisms and factory machinery in a wide range of industries like.

• Plastic industry in injection and blow moulding,
• Metal working cutting oils, welding equipment,
• Die-casting and machine tooling, chemical processing,
• Pharmaceutical formulation,
• Food and beverage processing,
• Paper and cement processing,
• Vacuum systems
• X-ray diffraction
• Target chiller used to cool high-heat specialized items such as MRI machines and lasers, and in hospitals, hotels and campuses.
• The chillers for industrial applications can be centralized,
• Decentral chillers are usually small in size (cooling capacity), usually from 0.2 tons to 10 tons. Central chillers generally have capacities ranging from 10 tons to 100

Specifications

When determining industrial chiller specifications, the following aspects need to be taken into consideration:

• Source of power
• Chiller rating
• Capacity of the evaporator and condenser
• Cooling capacity of the chiller
• Type of the evaporator
• Ambient temperature
• Material of evaporator and condenser
• Type of fan
• Expectations of efficiency
• Materials of plumbing and piping
• Limits of noise level
• Number of compressors and their type
• Number of circuits
• Fluid leaving temperature
• Coolant requirements
• Type of refrigerant

Target Equipment design of the tube heat exchanger is quite complex. The tubes used internally are deliberately of various shapes and design to obtain different outcomes. While a few of the tubes may be plain, others may come finned longitudinally or horizontally. Additionally, the tubes can also be of various materials and thermal conductivity. For instance, Target equipment can be designed from carbon steel, stainless steel, cupronickel, copper or brass.

Testing Of Tube Heat Exchanger

Owing to the complex nature of the tube heat exchangers, regular inspection of the equipment is necessary. This can help to assess the thickness of the tube walls that are prone to pitting, erosion and corrosion over time. The status of the whole bundle of tubes may be charted and assessed through a thorough inspection with the help of a device known as Internal Rotary Inspection System that functions via ultra-tonic testing and also has a non-destructive nature.

Specification and servicing.

We can manufacture a complete unit, replacement tube bundles (elements) or even a "parts kit"We replace existing tube bundle us per customer request we do size likeLengthupto 20, 000 mm, Weight up to 20 M.T , Pressure up to 300 Kg/cm3 Temperature up to 1000C, Tube Plate Dia upto 4000 mm, Thickness up to 100 mm.

Features

• Materials we used for Shell :, Copper, Carbon steel, stainless Steel sizes up to 20000 mm,
• Tubes Copper, Brass, Cupro-nickel , Carbon Steels in sizes from 6 mm to 50 mm OD, Stainless Steels,
• Tube Sheets: Carbon Steel, Stainless Steel, Brass etc.
• Channels and Cover : Carbon Steel, Stainless Steel, Case Iron, Brass etc.
• Gaskets : Rubber, Compressed

Application

• Chemical, Petrochemical,
• Fertiliser. Thermal Power plants,
• Refrigeration Plants,
• marine Engines,
• Turbines, Hydraulic Systems,
• Sugar Machinery.

Fin Type Coolers are produced in forced draught and induced draught designs, and in single and multi-fan arrangements, depending customer specifications and requirements, We are the professional Fin Type Cooler and air cooled condenser manufacturers, tubes in copper and fins are aluminium MOC we use 5/8 or 3/8and OD copper tubes as per customer specification, all tubes are well expanded tested for pressure and leak.

Advantages of Fin Type Cooler

• A great deal of water gets preserved on using Fin Type Cooler.
• Less or no preparation needed as atmospheric air is in abundance
• No formation of scale or heat exchanger cleaning is required
• There are no mobile parts except for the fan and the motors. Hence the cooling tower maintenance is negligible
• Dust, fly ash, living organisms or dirt do not get mixed up with process water
• There are no constraints placed on the location of plant
• No corrosions caused by air
• This cooling tower performance ensures minimal environmental impact
• Reduced annual operating expenses

Applications

• Predominantly used for air compressor and power generating units for applications of engine water cooling.
• Petroleum plant,
• power utility,
• steel manufacturing industry,
• cement,
• sugar factures,
• Chemical and gas-processing industrials.
• Chillier machines,
• refrigeration system

Target equipments evaporator cooling system division manufacturing includes of Evaporative cooling performance which installed outside of wall, brings fresh air into room by air distribution pipe with lowest power consumption, allows door and windows open, make your workshops and offices, factories cool in hot weather to be possible by paying 80% less power consumption to get best productivity and highest working efficiency. This dynamic due to changes in external temperature and humidity level. Under typical operating conditions, an evaporative cooler will nearly always deliver air cooler than 27C (80F). A typical residential 'swamp cooler' in good working order should cool air to within 34C (57F) of the wet-bulb temperature.

Target cooling machines ensure even & continuous water distribution which in turn gives higher cooling efficiency .Water distributor used will not allow circulating water to leak/to fall fan motor or to deviate its flow. Even water distribution will ensure higher cooling.

• Residences
• Offices
• Hotels
• Hospitals
• Showrooms
• Banks
• Commercial complex
• Shopping malls
• Cinemas
• Auditoriums
• Textile factories
• Computer rooms
• Animal house
• Green house
• generators rooms
• gas turbine intakes
• industrial cooling for shop floors
• spot cooling for hotspot
• comfort cooling for offices, Poultry etc.,
• commercial agriculture

Advantages

• Less expensive to install
• Less expensive to operate
• Ease of Maintenance
• Ventilation air

target equipments radiators are actually heat exchangers that are utilized to transfer thermal energy from a medium to the other for heating and cooling purposes. Most of the radiators are designed to function in buildings, electronics and automobiles. It is a heat source to the environment, though it may be to heat the surrounding or cool the coolant or fluid that is given to it, as in engine cooling.

target equipments wide variety and range of radiators, constructed from copper are manufactured with the latest in technology and technical data. A radiator makes use of hot water that circulates via metal pipes to heat air. As it passes through the pipe, the pipe itself gets heated and this heat is transmitted to the air, thus the room becomes warm. The hot water flows back to a boiler, in which it is heated & then circulated back.

radiator function in engine cooling

a liquid coolant is passed via the engine block, where it gets heated, and then is passed via the radiator where the heat is lost to the atmosphere. Though the coolant is usually water based, it can also be oil. The coolant air can be pumped or fanned through the radiator.

the hot water radiator is copper pipe that is iteratively bent perpendicularly to create a heating surface of maximum area. The pipes follow the ridged lines. Through valves present at the bottom, water enters and exits. The pipes of copper are bent backward and forward ten to twenty times covering a maximum surface in order to give more heat. Large radiators have many such bents as they have a huge surface area that heats the full room in the building.

the hot water that is pumped inside the radiators from the main heating boiler passes through the copper pipes, heats the outer surface and ultimately warms the room. A screw valve located at the bottom of each radiator helps in temperature control.

these radiators are of two kinds namely single pipe & double pipe. The radiators of single pipe operate with steam whereas the radiators of double pipe operate with hot water or steam. The double pipe kind is the vintage radiator type that has the highest demand.

the portable radiators that are electrically powered are basically of two kinds :

• electric elements like quartz, which radiates heat to a solid that conducts heat or heats directly
• liquid filled that makes use of an electric element in order to warm a fluid like oil that is held inside metal tubing, and which circulates through convection.

We manufacturer and supply kinds of Aluminium alloy sprinkler head and PVC alloy sprinkler head We have size of aluminium alloy sprinkler head is from 2 to 12 with 4 way sprinkler; these are Good quality, reliable in use.

We are considered as one of the most eminent Fiberglass Chemical Tank Manufacturers and Exporters in the country. Our FRP Chemical Tank is used for vacuum and pressure operations. Our Tanks are uniquely designed in industry specific grades and specifications. They are available in distinct designs such as vertical, atmospheric, and cylindrical tank. However, we are able to develop all kinds of customized FRP Chemical Storage Tank according to the requirements of the clients. Our Tanks meet the quality parameters set by the international authorities.

Made up of Aluminum alloy, our Industrial Sprinkler is fixed with sealed ball bearing that takes care of thrust and redials loads. Our sprinkler is brilliantly designed that comprises of unique features such as portable, tensile strength, durability, high efficiency, ductility, anti-corrosive properties, and many more. We also offer these sprinklers in stainless steel and brass as a basic raw material. We can also provide customized designs of Sprinklers as per the requirements of the clients. Consequently, we are recognized as one of the most prominent Stainless Steel Sprinkler Manufacturers and Nylon Sprinkler Exporters, based in India.

The company is engaged in manufacturing optimum quality Industrial Chiller in HLA range. We can also install these Chillers. We offer HVAC, Air Cooled, and Water Cooled Chiller in various grades and designs. Theses chillers are available in the range from 0.3kw to 1, 000kw single units. Also, they are served with heat pumps, chilled storage fan coils, air conditioning air handlers, portable heating and cooling units, office fan coils, and many more. At present, we are counted among the most prominent HVAC Chiller Manufacturers and Air Cooled Chiller Exporters in the country. Our Industrial Chillers are accessible with interior, exterior, and portable water treatment system, monitoring, and fluid distribution system.

Made up of Aluminum alloy, our Industrial Sprinkler is fixed with sealed ball bearing that takes care of thrust and redials loads. Our sprinkler is brilliantly designed that comprises of unique features such as portable, tensile strength, durability, high efficiency, ductility, anti-corrosive properties, and many more. We also offer these sprinklers in stainless steel and brass as a basic raw material. We can also provide customized designs of Sprinklers as per the requirements of the clients. Consequently, we are recognized as one of the most prominent Stainless Steel Sprinkler Manufacturers and Nylon Sprinkler Exporters, based in India.

The extremely efficacious PVC Fills, manufactured by us, find applications in Cooling Tower. Available in Industry-specific designs; our Cooling Tower PVC Fills render consistent performance for longer period of time. We offer these PVC Plastic Fills in various grades specifications as per the requirements of the clients. Accordingly, we are recognized as one of the foremost PVC Fills for Cooling Towers Manufacturers, based in India.

We have established ourselves among the foremost Industrial Evaporative Cooling System Manufacturers, based in India. Our Evaporative Cooling System is uniquely fabricated in compact design to meet the industrial need of the clients. It consumes low power compared to the other systems available in the market. It is made up of corrugated sheet assemble in exclusive self-supporting pads. However, our Desiccant Evaporative Cooling System requires low maintenance and renders trouble free performance for longer period of time.

We are reckoned as one of the reliable Refrigerated Compressed Air Dryers Manufacturers in India. Meeting to the specific requirements of the clients, the company has also acquired noteworthy position amidst the dependable Heatless Type Compressed Air Dryers Suppliers. Various industrial sectors are placing repeated orders for the Compressed Air Dryers these are easy to operate, durable and require low maintenance cost. Further to meet the specific requirements of the clients and applications we provide the below mentioned types of Compressed Air Dryers.

• Heatless Type
• Heat of Compression (HOC) Type
• Internal Heat Reaction Type
• No Purge Loss Type

Our range of Industrial Water Treatment Chemicals is meant to diminish the problems occurs during water treatment like corrosion, scale, suspended solids, and bio-fueling, and many more. Using efficacious raw materials, we have developed our Drinking Water Treatment Chemicals that make water pure and safe for drinking. Water treated with our chemicals can be used as per the requirements of the clients for domestic as well as industrial purposes. Consequently, we are identified as one of the most prominent Water Treatment Chemicals Exporters, based in India.

The hot water radiator is copper pipe that is iteratively bent perpendicularly to create a heating surface of maximum area. The pipes follow the ridged lines. Through valves present at the bottom, water enters and exits. The pipes of copper are bent backward and forward ten to twenty times covering a maximum surface in order to give more heat. Large radiators have many such bents as they have a huge surface area that heats the full room in the building. The hot water that is pumped inside the radiators from the main heating boiler passes through the copper pipes, heats the outer surface and ultimately warms the room. A screw valve located at the bottom of each radiator helps in temperature control.

We have industrial major standard size of PVC FILLS like 12mm, 19mm, 27 mm flute size in 60C Continuous Working Temp in two types 1) honey comb type PVC fills this are the standard size of PVC FILLS, used in bottle shape and square shape cooling tower. This types of fill available in three different colour white, black and blue 2) double edges folded PVC Fills the durability increases this types of fill, its available in two different colour black and blue, anther This fills are used in bottle shape, square shape cooling tower, Counter Flow cooling tower, Mechanical induced draft cooling tower.

We have Choice of cooling tower fan in Aluminium and FRP Available in different sizes from 0.45 m to 10 m dia. Its an efficient axial flow propeller type design and Adjustable pitch blades, more number of blades results in smooth and pulsation-free operation Our cooling tower fan Matched with all types of low noise cross flow cooling tower and counter flow cooling tower.

Perfect for heavy duty fog applications, our superlative Fog Nozzles consist of anti-drips and Check Valve. These Nozzles are made up of stainless steel and brass. Our Brass Fog Nozzles are efficient to replace quality brands of for system. They are able to produce 0.008" nozzle orifice and 10 Micron Water Droplets, 1/10 of the diameter of the human hair. Accordingly, we are acknowledged as one of the most Low Pressure Fog Nozzles Exporters and Suppliers, based in India.

We deal in all kinds of FRP Aluminum Fan and other replacement parts that exclusively designed to meet the specific need of Air Cooled Heat Exchangers and Cooling Towers. The FRP Cooling Tower Fan, manufactured by us, provides high performance even in adverse climatic conditions, especially hot and damp areas. The blades of the fan are made up of high quality stainless steel, which makes them resistant to corrosion. At present, we are identified as one of the most reputed Cooling Tower Aluminium Fan Manufacturers, based in India.

We are identified as one of the most prominent FRP Cooling Tower Motor Manufacturers in Tamil Nadu. Our Cooling Tower Motor is made up of quality raw materials due to which it has high tensile strength and durability. However, it consumes low power. Our Electric Cooling Tower Motor is highly efficient and renders consistent performance for longer period of time.