Our Products
The heat from exothermic reactions is sometimes removed by passing thermic fluid in coils. The hot thermic fluid has to be cooled down before sending back to the cooling coil. We design and manufacture air cooled thermic fluid coolers for such applications.
Air blast oil coolers like air cooled hydraulic oil coolers, lube oil coolers, gear oil coolers and finned tube heat exchangers to cool other viscous fluids. Typical applications are oil cooling in excavators (earth movers), compressors etc. Wire wound fin tubes with internal fins are used for making the oil cooler compact and economical.
Air coolers and chillers of the following types are designed and manufactured by us :
Cooling of air may be necessitated when air is being re-circulated over an equipment getting heated up during operation. Air coolers are used to cool air for cooling of large motors, alternators and generators.
Air chiller is used to cool air to a temperature low enough to condense out the moisture to achieve required relative humidity suitable for use in dryers after heating the chilled air. Our designs and construction is compact and economical even where the LMTD is low.
Wire wound fin tubes are used for making the finned air coolers and chillers coils. This makes these heat exchangers compact, economical with lower pressure drops. Base tubes of carbon steels, copper and copper alloys, stainless steel 304, stainless steel 316 and other stainless steel grades finned with galvanised mild steel, copper and stainless steel fins are used in fabrication of the air cooled condenser. The body material used so far is carbon steel and stainless steels.
TAAM engineering manufactures air cooled oil radiators (air blast oil coolers) like air cooled hydraulic oil coolers, lube oil coolers, gear oil coolers and finned tube heat exchangers to cool other viscous fluids. Typical applications are oil cooling in excavators (earth movers), compressors etc. Wire wound fin tubes with internal fins are used for making the oil cooler compact and economical.
We manufacture wire wound fin tubes, turbulators and other fin tubes in our own factory. Base tubes of carbon steels, copper and copper alloys, stainless steel 304, stainless steel 316 and other stainless steel grades finned with galvanised mild steel, copper and stainless steel fins are used in fabrication of the air cooled cooler. The body material used so far is carbon steel and stainless steels.
We design complete fin fan oil cooler assembly and also supply as assembled unit comprising of finned tube oil cooler, the transition piece and the fan.