Our Products
Lubricants
2 Products availableIndustrial Lubricant
1 Products availableIndustrial Oil
1 Products availableTextile Chemicals
1 Products availableCorrosion And Rust Control Products
1 Products availableElectronic Component Cleaner
1 Products availableWe offer the best product range of Synthetic Vacuum Pump Oil, Syntho Poly-100 Polyurea Complex Grease, Synthetic Worm Gear Oil, 350 Silicon Oil and SG-440 Water Resistant Glycol Grease.
HVG Grade 120/160 Synthetic Mechanical Vacuum Pump Fluid is formulated with premium synthetic tri-ester technology. This is high quality, long life fluid tested several times, longer in use than mineral based oils.
It is fully formulated with non detergent additives, designed for use in rotary vacuum pumps, inherent lubricity and good conductivity which allow it to reduce heat and energy consumption.
Performance Features:
Resist foaming, most inert to moisture rust and oxidation inhibited, readily separate form water, long life extended drains, completely ash-less hence no formation of slug. This is recommended for rotary vacuum pumps.
Specifications
HVR Grade | Avg. M. W. | Vapour Pr. | Viscosity@40°C | Sp. Gravity @22 °C | Flash Point |
---|---|---|---|---|---|
HVG 120 | < 540 | @25C 1X10-7 torr @100C 2X10-4 torr |
120 CST | 0.838g/ml | 249°C |
HVG 120 | < 546 | @25C 1X10-7 torr @100C 2X10-4 torr |
160 CST | 0.989g/ml | 260°C |
Syntho Poly-100 are Polyurea Complex Greases that are formulated with a combination of mineral & synthetic base oil for better resistance to ageing, good adhesion & excellent water resistance. These are highly resistant to mechanical fatigue, heat, corrosion & do not harden prematurely.
Premium quality multi-purpose polyalkalyne glycol (PAG) base lithium soap grease.
High-performance grease which combines a synthetic base fluid with a lithium complex soap thickener, with PTFE.
Non-melting grease containing Molybdenum Disulphide.
A special product, designed for specific high temperature applications. Compatible with polymeric type rubber seals as well as fluorocarbon materials such as Teflon and Viton.
Premium quality multi-purpose lithium soap base grease containing micronized Molybdenum Disulphide.
High performance, extreme-pressure greases which combine a synthetic base fluid with a lithium complex soap thickener, with PTFE.
30, 000 rpm Long term lubrication of Ring Frame bottom roller bushes.
Draw frame top roller end bush bearing.
Extreme high temperature low rpm application in grease lubricated stenter chain bearings.
Applications
How To Apply
Clean and de-grease chain completely of old grease and Varnish residues. Apply the lubricant initially for around 30 minutes to allow complete penetration to all points, Re-Lubricate as necessary. Do not mix with other lubricant or solvents.
Manufactured from a synthesized hydrocarbon fluid and a non-soap thickener.
This is a universal assembly compound formulated using blends of finely dispersed solid lubricants and metals in special carrier. It's inherent properties allows lubrication, to sustain in high temperatures and high load zones.
Silicone Lubricating fluid thickened with a special complex Lithium soap.
Technical Specification
HVR Grade | Avg. M. W. | Vapour Pr. | Viscosity@40°C | Sp. Gravity @22 °C | Flash Point |
---|---|---|---|---|---|
HVG 120 | < 540 | @25C 1X10-7 torr @100C 2X10-4 torr |
120 CST | 0.838g/ml | 249°C |
HVG 120 | < 546 | @25C 1X10-7 torr @100C 2X10-4 torr |
160 CST | 0.989g/ml | 260°C |
Syntho Poly-460 are Polyurea Complex Greases that are formulated with a combination of mineral & synthetic base oil for better resistance to ageing, good adhesion & excellent water resistance. These are highly resistant to mechanical fatigue, heat, corrosion & do not harden prematurely.
Extremely stable suspension of uniform, micronized molybdenum disulfide particles, in a highly refined oil concentrate.
PTFE (Teflon) and other lubricating solids, enable it to pass a 760 C pipe thread anti-seize test.
A Low friction assembly aid containing a synergenic mixture of solid lubricants.