• MaterialMetal
• ConditionNew
• ApplicationWater Leak Detection
• FeatureDurable, Hard Structure

  Conventional touchscreen water leak detection panel 10.1’ Touch screen display From 2 zones to upto 16 zones with a built-in module Zone addressing which enables the user to name the zones as per site condition The panel continuously displays status of all zones Zone sensitivity feature is provided which enables the user to set the sensitivity of sensing cables as per the site requirements Zone Isolation Event log of upto 500 events with date & time Cable fault in case of water leak cable break Input to water leak cable is an isolated AC supply Modbus / Bacnet IP output Common alarm, zone wise alarm and common fault potential-free relay output NEMA 4X IP65 enclosure In-built battery charger CE certified  

• ColorRed
• FeatureEasy To Install, High Accuracy

The Fire Alarm Panel ranges from 1 to 64 zones Four-wire looping system resulting in large saving of cabling cost The panel complies with IS 2189 specification Zone addressing, Zone Isolation. MCP cum hooter comes with LED Flasher All MCP cum hooter can be tested from panel itself Built-in amplifier & microphone Call-all & zone wise calling from panel Potential-free relay output for fire & fault Pre-recorded message / sound from hooter

 Controller with LCD display. Can connect upto 24 Transducers with blinking LED’s in a single loop Modbus output and potential-free relay output for BMS integration Two way communication between the controller and computer LCD display with onboard controls for changing the following parameters Wave Speed: Its an indicator for the number of frequency sweeps per minute. It can have a maximum value of 130 and a minimum value of 60. The incremental size is 5 i.e. 65, 70, 75 and so on Wave Density: Its an indicator for the number of divisions within a frequency band. It can have maximum value of 100 and a minimum value of 80. The incremental size is 10 i.e. 80, 90 and 100 Frequency Band Time: Is an indicator of the time for which the controller would operate in a pre-programmed frequency band. There are 3 bands available: Band A, Band B, and Band C. This parameter can have maximum value of 10 min per band and a minimum value of 1 min per band. Depending upon the time frame the controller will switch the bands automatically Frequency Testing: This feature will enable the user to test and verify the frequency that is being transmitted from the controller to the transducer. This feature would be particularly useful during systems audit Transducer Testing: All the 24 transducers can be tested in an audible range all at a time using this feature Frequency band of > 20 kHz and

• MaterialMetal
• ConditionNew
• ApplicationWater Leak Detection
• FeatureDurable, Hard Structure

  Conventional touchscreen water leak detection panel 10.1’ Touch screen display From 2 zones to upto 16 zones with a built-in module Zone addressing which enables the user to name the zones as per site condition The panel continuously displays status of all zones Zone sensitivity feature is provided which enables the user to set the sensitivity of sensing cables as per the site requirements Zone Isolation Event log of upto 500 events with date & time Cable fault in case of water leak cable break Input to water leak cable is an isolated AC supply Modbus / Bacnet IP output Common alarm, zone wise alarm and common fault potential-free relay output NEMA 4X IP65 enclosure In-built battery charger CE certified  

• ColorRed
• FeatureEasy To Install, High Accuracy

The Fire Alarm Panel ranges from 1 to 64 zones Four-wire looping system resulting in large saving of cabling cost The panel complies with IS 2189 specification Zone addressing, Zone Isolation. MCP cum hooter comes with LED Flasher All MCP cum hooter can be tested from panel itself Built-in amplifier & microphone Call-all & zone wise calling from panel Potential-free relay output for fire & fault Pre-recorded message / sound from hooter

 Controller with LCD display. Can connect upto 24 Transducers with blinking LED’s in a single loop Modbus output and potential-free relay output for BMS integration Two way communication between the controller and computer LCD display with onboard controls for changing the following parameters Wave Speed: Its an indicator for the number of frequency sweeps per minute. It can have a maximum value of 130 and a minimum value of 60. The incremental size is 5 i.e. 65, 70, 75 and so on Wave Density: Its an indicator for the number of divisions within a frequency band. It can have maximum value of 100 and a minimum value of 80. The incremental size is 10 i.e. 80, 90 and 100 Frequency Band Time: Is an indicator of the time for which the controller would operate in a pre-programmed frequency band. There are 3 bands available: Band A, Band B, and Band C. This parameter can have maximum value of 10 min per band and a minimum value of 1 min per band. Depending upon the time frame the controller will switch the bands automatically Frequency Testing: This feature will enable the user to test and verify the frequency that is being transmitted from the controller to the transducer. This feature would be particularly useful during systems audit Transducer Testing: All the 24 transducers can be tested in an audible range all at a time using this feature Frequency band of > 20 kHz and