Post Buy Requirement

Our Products

  1. Insecticides 7 Products available
  2. Fire Alarm Control Panel 3 Products available
  3. Electric Control Panels

    2 Products available
  4. Leak Detectors

    2 Products available
  5. Telecommunication Equipment & System

    2 Products available
  6. Security And Inspection Devices

    2 Products available
  7. Fire Fighting & Protection

    2 Products available
  8. Electric Circuit Components & Parts

    1 Products available
  9. Computer Cables, Adapters & Modules

    1 Products available
  10. Wires

    1 Products available
  11. Others Products 3 Products available

Insecticides

We are leaders in the market for providing best range of R-Scat LCD24 Digital Rodent Repellent System, R-SCAT 24 BL Digital Rodent Repellent System, R-SCAT JAY Je1Z12 (ERTL) Analog Rodent Repellent System, R-SCAT JAY Je4Z15 Analog Rodent Repellent System and R-SCAT JAY JeLOOP20 Analog Rodent Repellent System

R-Scat LCD24 Digital Rodent Repellent System

  • Operating Frequency Above 20 KHZ and below 60 KhZ.
  • Sound output 80db to 110db at 1metre.
  • Power output 1W per transducer.
  • Power Consumption 15 Watts Approximately.
  • Power Supply 230V AC/ 50Hz 14 Volts DC.
  • Dimensions 275(W) x 100(H) x 225(D) mm
  • Weight 3 Kgs Approx.
  • Mounting Wall / Table Mounting

This revolutionary pest control unit turns your office into a fortress against rodents. High pressure Transducer emits a powerful ultrasonic sound that normal speakers are unable to emit.
Much like a loud siren the sound intermittently attack pests to drive them out. R-Scat HFT uses a variable high frequency ultrasound so that pests do not get accustomed, the pest will leave the area being protected.
R-Scat transducers work silently, humans can’t hear them so there is no discomfort to Humans.
The panels are manufactured to the highest quality standards to meet the most stringent and diverse requirements. The panels are cost effective, reliable and easy to install & operate

Features of Products :

  • LCD Display with on board controls.
  • Displays and configures Wave speed, Wave density, Frequency Band Time, Frequency Testing, Transducer Testing, Machine Controller/ID.
  • Can connect upto 24 Transducers with blinking LED’s.
  • The Transducer covers area of 500ft.in all voids i.e room void, above false ceiling and below false ceiling.
  • All the Transducers are connected in a single loop.
  • Self Testing facility of Transducer.
  • Frequency band of Frequencies above 20KHZ and below 60 KHZ is per tuned for 100 different frequencies.
  • Modbus output for BMS Communication.

Tender Specification


Download Detail File : Click Here
View Complete Details

R-SCAT 24 BL Digital Rodent Repellent System

  • Weight 5 Kgs Approx.
  • Operating Frequency Above 20 KHZ and below 60 KhZ.
  • Sound output 80db to 110db at 1metre.
  • Power output 1W per transducer.
  • Power Consumption 15 Watts Approximately.
  • Power Supply 230V AC/ 50Hz 14 Volts DC.
  • Dimensions 275(W) x 100(H) x 340(D) mm

This revolutionary pest control unit turns your office into a fortress against rodents. High pressure Transducer emits a powerful ultrasonic sound that normal speakers are unable to emit.
Much like a loud siren the sound intermittently attack pests to drive them out. R-Scat HFT uses a variable high frequency ultrasound so that pests do not get accustomed, the pest will leave the area being protected.
R-Scat transducers work silently, humans can’t hear them so there is no discomfort to Humans.
The panels are manufactured to the highest quality standards to meet the most stringent and diverse requirements. The panels are cost effective, reliable and easy to install & operate.

Features of Products :

  • LCD Display with on board controls.
  • R-Scat CRMS (Centralized Reporting and Monitoring System) Software supporting:
    • Scheduled or Real Time health status report generation for Systems Audit.
    • Parameter configuration of the controller.
    • Two-way Communication between the controller and the computer.
    • RS / EIA 485 to RS / EIA 232C converter to transfer the controller data to the serial port of your computer.
  • Displays and configures Wave speed, Wave density, Frequency Band Time, Frequency Testing, Transducer Testing, Machine Controller/ID.
  • Can connect upto 24 Transducers with blinking LED’s.
  • The Transducer covers area of 500ft.in all voids i.e room void, above false ceiling and below false ceiling.
  • Independent Drivers for each Transducer.
  • Independent Test facility for each transducer.
  • Frequency band of Frequencies above 20KHZ and below 60 KHZ is per tuned for 100 different frequencies.

Tender Specification


Download Detail File : Click Here
View Complete Details

R-SCAT JAY Je1Z12 (ERTL) Analog Rodent Repellent System

  • Power Consumption 5.5Watts per transducer
  • Power Supply 230V AC/ 50Hz (15Amp Socket)
  • Dimensions 200(W) x 90(H) x 415(D)mm
  • Weight 4.0 Kgs Approx.
  • Operating Frequency Above 20 KHZ (Variable).
  • Sound output 50db to 100db at 1metre.
  • Power output 850mW per transducer.
  • Mounting Wall/Table Mounting
  • Main Console The Main Console can connect up to 12 Transducers (Satellites).

This revolutionary pest control unit turns your office into a fortress against rodents. High pressure Transducer emits a powerful ultrasonic sound that normal speakers are unable to emit.
Much like a loud siren the sound intermittently attack pests to drive them out. R-Scat HFT uses a variable high frequency ultrasound so that pests do not get accustomed, the pest will leave the area being protected.
R-Scat transducers work silently, humans cant hear them so there is no discomfort to Humans.
The panels are manufactured to the highest quality standards to meet the most stringent and diverse requirements. The panels are cost effective, reliable and easy to install & operate.

Features of Products :

  • Upto 12 Transducers can be connected to main console.
  • ERTL Tested.
  • Individual wiring for transducers.
  • Self testing facility of transducers.
  • Compact and elegant looks.
  • User Friendly controls.
  • The satellites do not need a power connection and they can be tested on an audible range with the help of a self-testing facility.


Area covered by each transducer : (Approximately)

  • Room Void : 300 Sq. ft.
  • Ceiling Void : 150 Sq. ft.
  • Below false flooring : 150 Sq. ft.

Tender Specification


Download Detail File : Click Here
View Complete Details

R-SCAT JAY Je4Z15 Analog Rodent Repellent System

  • Power Consumption 5.5Watts per transducer.
  • Power Supply 230V AC/ 50Hz (15Amp Socket).
  • Dimensions 200(W) x 90(H) x 415(D) mm.
  • Weight 4 Kgs Approx.
  • Operating Frequency Above 20 KHZ (Variable).
  • Sound output 50db to 100db at 1metre.
  • Power output 850mW per transducer.
  • Mounting Wall/Table Mounting.

This revolutionary pest control unit turns your office into a fortress against rodents. High pressure Transducer emits a powerful ultrasonic sound that normal speakers are unable to emit.
Much like a loud siren the sound intermittently attack pests to drive them out. R-Scat HFT uses a variable high frequency ultrasound so that pests do not get accustomed, the pest will leave the area being protected.
R-Scat transducers work silently, humans cant hear them so there is no discomfort to Humans.
The panels are manufactured to the highest quality standards to meet the most stringent and diverse requirements. The panels are cost effective, reliable and easy to install & operate.

Features of Products :

  • Upto 15 Transducers can be connected to main console.
  • Transducers are looped in parallel thereby large reduction in cabling cost.
  • Only two terminals for 15 transducers, easy to install and service.
  • Self Testing facility of transducers.
  • Wall mounted consoles.
  • Compact and elegant look.
  • User friendly controls.


Technical Specification :

  • Main Console : The Main Console contains 4 Panels in one box and can connect upto 60 Transducers (Satellites) in all.
  • The cabling from main console to Transducers is to be looped from one transducer to another.

Area covered by each transducer : (Approximately)

  • Room Void : 300 Sq. ft.
  • Ceiling Void : 150 Sq. ft.
  • Below false flooring : 150 Sq. ft.
View Complete Details

R-SCAT JAY JeLOOP20 Analog Rodent Repellent System

  • Power Consumption 5.5Watts per transducer.
  • Power Supply 230V AC/ 50Hz (15Amp Socket).
  • Dimensions 200(W) x 90(H) x 415(D)mm
  • Weight 4.0 Kgs Approx.
  • Operating Frequency Above 20 KHZ (Variable).
  • Sound output 50db to 100db at 1metre.
  • Power output 850mW per transducer.
  • Mounting Wall/Table Mounting

This revolutionary pest control unit turns your office into a fortress against rodents. High pressure Transducer emits a powerful ultrasonic sound that normal speakers are unable to emit.
Much like a loud siren the sound intermittently attack pests to drive them out. R-Scat HFT uses a variable high frequency ultrasound so that pests do not get accustomed, the pest will leave the area being protected.
R-Scat transducers work silently, humans cant hear them so there is no discomfort to Humans.
The panels are manufactured to the highest quality standards to meet the most stringent and diverse requirements. The panels are cost effective, reliable and easy to install & operate.

Features of Products :

  • Upto 20 Transducers can be connected to main console.
  • Transducers are looped in parallel thereby large reduction in cabling cost.
  • Only two terminals for 20 transducers, easy to install and service.
  • Self Testing facility of transducers.
  • Wall mounted consoles.
  • Compact and elegant look.
  • User friendly controls.


Technical Specification :

  • Main Console : The Main Console can connect up to 20 Transducers (Satellites).
  • The cabling from main console to Transducers is to be looped from one transducer to another.


Area covered by each transducer : (Approximately)

  • Room Void : 300 Sq. ft.
  • Ceiling Void : 150 Sq. ft.
  • Below false flooring : 150 Sq. ft.
View Complete Details

RSCAT TRND 150/300 Transducer Rodent Repellent System

  • Power Consumption 5.5Watts per transducer.
  • Power Supply 230V AC/ 50Hz (15Amp Socket).
  • Operating Frequency Above 20 KHZ (Variable).
  • Sound output 50db to 100db at 1metre.
  • Power output 850mW per transducer.

RSCAT UltrasonicPest Repellers are electronic transmitters of high frequency sound . They emit intensive sound at high decibel levelsthat is audible and painful to pests but inaudible to humans. The pests will usually leave the area being protected bythe ultrasound.They do not get killed.
The powerful sound waves generated by the transducers of RSCAT repellers are within the hearing range of many pets and cause them pain and discomfort. Sometimes they will leave the area being protected immediately, in other cases it will take as long as two to three weeks before significant reduction in infestation occurs.
RSCAT transducers are completely quiet. If you cannot hear do not thing that the unit is not working. You cannot hear ultrasound.

Features :
Crystal : Shall be similar to DM 44T 24V of MAS Germany. Visible Hexagonal, Triangle excitor – Centre damp horizontal line excitors.


Frequency : Peak frequency responses of the satellites are,

  • 21.6 KHz +/- 3 KHz
  • 31.6 KHz +/- 3 KHz
  • 50.4 KHz +/- 3 KHz
  • 60 KHz +/- 3 KHz


Nature Of Sound Waves: The sound waves propagated by the satellites shall be linear sine waves with constantly varying frequencies.

View Complete Details

Standalone Rodent Repellent System

  • Power Supply 230 Volts 50 HZ AC
  • Power Consumption 5 watt per transducer.
  • Dimensions 200(H) X 100(W) X 100(D) mm.
  • Weight 1125gms
  • Operating Frequency Above 20 KHZ.
  • Sound output 80db to 100db.
  • Power output 900mw per transducer.

They emit intensive sound at high audible and painful to pests but inaudible to humans. The pests will usually leave the area being protected by the ultrasound.They do not get killed.
The powerful sound waves generated by the transducers of RSCAT Repellents are within the hearing range of many pests and cause them pain and discomfort.
Sometimes they will leave the area being protected immediately, in other cases it will take as long as two to three weeks before significant reduction in infestation occurs.
RSCAT transducers are completely quiet. If you cannot hear do not thing that the unit is not working. You cannot hear ultrasound.

Location of RRS :

  • Aim the RSCAT unit to the wall so that the sound will ‘bounce around’ and will reflect from walls, ceiling, room contents and floor and will be present throughout the area. Since ultrasound usually does not penetrate walls, it is important that it bounces around corners to cover larger areas. Plug the R-Scat unit into a 230Volts standard wall outlet.
  • Extension cords may be used if necessary. The green LED will act as a breather; it will go on and off to indicate that the unit is working. Leave the RSCAT unit ON 24 hours a day.
  • RSCAT units are designed for indoor use. If used outdoors they should be protected from the weather. Outdoors, there are fewer possibilities for reflection of ultrasound and many things that will absorb or dampen sound, their use is limited.
  • Guarantee : RSCAT units are guaranteed for one year from the date of purchase by the user against defects in materials or workmanship.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Retailer of Insecticides from Mumbai, Maharashtra by Synopsys Tech Pvt Ltd.
Post Buy Requirement

Our Products

  1. Insecticides 7 Products available
  2. Fire Alarm Control Panel 3 Products available
  3. Electric Control Panels

    2 Products available
  4. Leak Detectors

    2 Products available
  5. Telecommunication Equipment & System

    2 Products available
  6. Security And Inspection Devices

    2 Products available
  7. Fire Fighting & Protection

    2 Products available
  8. Electric Circuit Components & Parts

    1 Products available
  9. Computer Cables, Adapters & Modules

    1 Products available
  10. Wires

    1 Products available
  11. Others Products 3 Products available

Insecticides

We offer a complete product range of R-Scat LCD24 Digital Rodent Repellent System, R-SCAT 24 BL Digital Rodent Repellent System, R-SCAT JAY Je1Z12 (ERTL) Analog Rodent Repellent System, R-SCAT JAY Je4Z15 Analog Rodent Repellent System and R-SCAT JAY JeLOOP20 Analog Rodent Repellent System

R-Scat LCD24 Digital Rodent Repellent System

  • Operating Frequency Above 20 KHZ and below 60 KhZ.
  • Sound output 80db to 110db at 1metre.
  • Power output 1W per transducer.
  • Power Consumption 15 Watts Approximately.
  • Power Supply 230V AC/ 50Hz 14 Volts DC.
  • Dimensions 275(W) x 100(H) x 225(D) mm
  • Weight 3 Kgs Approx.
  • Mounting Wall / Table Mounting

This revolutionary pest control unit turns your office into a fortress against rodents. High pressure Transducer emits a powerful ultrasonic sound that normal speakers are unable to emit.
Much like a loud siren the sound intermittently attack pests to drive them out. R-Scat HFT uses a variable high frequency ultrasound so that pests do not get accustomed, the pest will leave the area being protected.
R-Scat transducers work silently, humans can’t hear them so there is no discomfort to Humans.
The panels are manufactured to the highest quality standards to meet the most stringent and diverse requirements. The panels are cost effective, reliable and easy to install & operate

Features of Products :

  • LCD Display with on board controls.
  • Displays and configures Wave speed, Wave density, Frequency Band Time, Frequency Testing, Transducer Testing, Machine Controller/ID.
  • Can connect upto 24 Transducers with blinking LED’s.
  • The Transducer covers area of 500ft.in all voids i.e room void, above false ceiling and below false ceiling.
  • All the Transducers are connected in a single loop.
  • Self Testing facility of Transducer.
  • Frequency band of Frequencies above 20KHZ and below 60 KHZ is per tuned for 100 different frequencies.
  • Modbus output for BMS Communication.

Tender Specification


Download Detail File : Click Here
View Complete Details

R-SCAT 24 BL Digital Rodent Repellent System

  • Weight 5 Kgs Approx.
  • Operating Frequency Above 20 KHZ and below 60 KhZ.
  • Sound output 80db to 110db at 1metre.
  • Power output 1W per transducer.
  • Power Consumption 15 Watts Approximately.
  • Power Supply 230V AC/ 50Hz 14 Volts DC.
  • Dimensions 275(W) x 100(H) x 340(D) mm

This revolutionary pest control unit turns your office into a fortress against rodents. High pressure Transducer emits a powerful ultrasonic sound that normal speakers are unable to emit.
Much like a loud siren the sound intermittently attack pests to drive them out. R-Scat HFT uses a variable high frequency ultrasound so that pests do not get accustomed, the pest will leave the area being protected.
R-Scat transducers work silently, humans can’t hear them so there is no discomfort to Humans.
The panels are manufactured to the highest quality standards to meet the most stringent and diverse requirements. The panels are cost effective, reliable and easy to install & operate.

Features of Products :

  • LCD Display with on board controls.
  • R-Scat CRMS (Centralized Reporting and Monitoring System) Software supporting:
    • Scheduled or Real Time health status report generation for Systems Audit.
    • Parameter configuration of the controller.
    • Two-way Communication between the controller and the computer.
    • RS / EIA 485 to RS / EIA 232C converter to transfer the controller data to the serial port of your computer.
  • Displays and configures Wave speed, Wave density, Frequency Band Time, Frequency Testing, Transducer Testing, Machine Controller/ID.
  • Can connect upto 24 Transducers with blinking LED’s.
  • The Transducer covers area of 500ft.in all voids i.e room void, above false ceiling and below false ceiling.
  • Independent Drivers for each Transducer.
  • Independent Test facility for each transducer.
  • Frequency band of Frequencies above 20KHZ and below 60 KHZ is per tuned for 100 different frequencies.

Tender Specification


Download Detail File : Click Here
View Complete Details

R-SCAT JAY Je1Z12 (ERTL) Analog Rodent Repellent System

  • Power Consumption 5.5Watts per transducer
  • Power Supply 230V AC/ 50Hz (15Amp Socket)
  • Dimensions 200(W) x 90(H) x 415(D)mm
  • Weight 4.0 Kgs Approx.
  • Operating Frequency Above 20 KHZ (Variable).
  • Sound output 50db to 100db at 1metre.
  • Power output 850mW per transducer.
  • Mounting Wall/Table Mounting
  • Main Console The Main Console can connect up to 12 Transducers (Satellites).

This revolutionary pest control unit turns your office into a fortress against rodents. High pressure Transducer emits a powerful ultrasonic sound that normal speakers are unable to emit.
Much like a loud siren the sound intermittently attack pests to drive them out. R-Scat HFT uses a variable high frequency ultrasound so that pests do not get accustomed, the pest will leave the area being protected.
R-Scat transducers work silently, humans cant hear them so there is no discomfort to Humans.
The panels are manufactured to the highest quality standards to meet the most stringent and diverse requirements. The panels are cost effective, reliable and easy to install & operate.

Features of Products :

  • Upto 12 Transducers can be connected to main console.
  • ERTL Tested.
  • Individual wiring for transducers.
  • Self testing facility of transducers.
  • Compact and elegant looks.
  • User Friendly controls.
  • The satellites do not need a power connection and they can be tested on an audible range with the help of a self-testing facility.


Area covered by each transducer : (Approximately)

  • Room Void : 300 Sq. ft.
  • Ceiling Void : 150 Sq. ft.
  • Below false flooring : 150 Sq. ft.

Tender Specification


Download Detail File : Click Here
View Complete Details

R-SCAT JAY Je4Z15 Analog Rodent Repellent System

  • Power Consumption 5.5Watts per transducer.
  • Power Supply 230V AC/ 50Hz (15Amp Socket).
  • Dimensions 200(W) x 90(H) x 415(D) mm.
  • Weight 4 Kgs Approx.
  • Operating Frequency Above 20 KHZ (Variable).
  • Sound output 50db to 100db at 1metre.
  • Power output 850mW per transducer.
  • Mounting Wall/Table Mounting.

This revolutionary pest control unit turns your office into a fortress against rodents. High pressure Transducer emits a powerful ultrasonic sound that normal speakers are unable to emit.
Much like a loud siren the sound intermittently attack pests to drive them out. R-Scat HFT uses a variable high frequency ultrasound so that pests do not get accustomed, the pest will leave the area being protected.
R-Scat transducers work silently, humans cant hear them so there is no discomfort to Humans.
The panels are manufactured to the highest quality standards to meet the most stringent and diverse requirements. The panels are cost effective, reliable and easy to install & operate.

Features of Products :

  • Upto 15 Transducers can be connected to main console.
  • Transducers are looped in parallel thereby large reduction in cabling cost.
  • Only two terminals for 15 transducers, easy to install and service.
  • Self Testing facility of transducers.
  • Wall mounted consoles.
  • Compact and elegant look.
  • User friendly controls.


Technical Specification :

  • Main Console : The Main Console contains 4 Panels in one box and can connect upto 60 Transducers (Satellites) in all.
  • The cabling from main console to Transducers is to be looped from one transducer to another.

Area covered by each transducer : (Approximately)

  • Room Void : 300 Sq. ft.
  • Ceiling Void : 150 Sq. ft.
  • Below false flooring : 150 Sq. ft.
View Complete Details

R-SCAT JAY JeLOOP20 Analog Rodent Repellent System

  • Power Consumption 5.5Watts per transducer.
  • Power Supply 230V AC/ 50Hz (15Amp Socket).
  • Dimensions 200(W) x 90(H) x 415(D)mm
  • Weight 4.0 Kgs Approx.
  • Operating Frequency Above 20 KHZ (Variable).
  • Sound output 50db to 100db at 1metre.
  • Power output 850mW per transducer.
  • Mounting Wall/Table Mounting

This revolutionary pest control unit turns your office into a fortress against rodents. High pressure Transducer emits a powerful ultrasonic sound that normal speakers are unable to emit.
Much like a loud siren the sound intermittently attack pests to drive them out. R-Scat HFT uses a variable high frequency ultrasound so that pests do not get accustomed, the pest will leave the area being protected.
R-Scat transducers work silently, humans cant hear them so there is no discomfort to Humans.
The panels are manufactured to the highest quality standards to meet the most stringent and diverse requirements. The panels are cost effective, reliable and easy to install & operate.

Features of Products :

  • Upto 20 Transducers can be connected to main console.
  • Transducers are looped in parallel thereby large reduction in cabling cost.
  • Only two terminals for 20 transducers, easy to install and service.
  • Self Testing facility of transducers.
  • Wall mounted consoles.
  • Compact and elegant look.
  • User friendly controls.


Technical Specification :

  • Main Console : The Main Console can connect up to 20 Transducers (Satellites).
  • The cabling from main console to Transducers is to be looped from one transducer to another.


Area covered by each transducer : (Approximately)

  • Room Void : 300 Sq. ft.
  • Ceiling Void : 150 Sq. ft.
  • Below false flooring : 150 Sq. ft.
View Complete Details

RSCAT TRND 150/300 Transducer Rodent Repellent System

  • Power Consumption 5.5Watts per transducer.
  • Power Supply 230V AC/ 50Hz (15Amp Socket).
  • Operating Frequency Above 20 KHZ (Variable).
  • Sound output 50db to 100db at 1metre.
  • Power output 850mW per transducer.

RSCAT UltrasonicPest Repellers are electronic transmitters of high frequency sound . They emit intensive sound at high decibel levelsthat is audible and painful to pests but inaudible to humans. The pests will usually leave the area being protected bythe ultrasound.They do not get killed.
The powerful sound waves generated by the transducers of RSCAT repellers are within the hearing range of many pets and cause them pain and discomfort. Sometimes they will leave the area being protected immediately, in other cases it will take as long as two to three weeks before significant reduction in infestation occurs.
RSCAT transducers are completely quiet. If you cannot hear do not thing that the unit is not working. You cannot hear ultrasound.

Features :
Crystal : Shall be similar to DM 44T 24V of MAS Germany. Visible Hexagonal, Triangle excitor – Centre damp horizontal line excitors.


Frequency : Peak frequency responses of the satellites are,

  • 21.6 KHz +/- 3 KHz
  • 31.6 KHz +/- 3 KHz
  • 50.4 KHz +/- 3 KHz
  • 60 KHz +/- 3 KHz


Nature Of Sound Waves: The sound waves propagated by the satellites shall be linear sine waves with constantly varying frequencies.

View Complete Details

Standalone Rodent Repellent System

  • Power Supply 230 Volts 50 HZ AC
  • Power Consumption 5 watt per transducer.
  • Dimensions 200(H) X 100(W) X 100(D) mm.
  • Weight 1125gms
  • Operating Frequency Above 20 KHZ.
  • Sound output 80db to 100db.
  • Power output 900mw per transducer.

They emit intensive sound at high audible and painful to pests but inaudible to humans. The pests will usually leave the area being protected by the ultrasound.They do not get killed.
The powerful sound waves generated by the transducers of RSCAT Repellents are within the hearing range of many pests and cause them pain and discomfort.
Sometimes they will leave the area being protected immediately, in other cases it will take as long as two to three weeks before significant reduction in infestation occurs.
RSCAT transducers are completely quiet. If you cannot hear do not thing that the unit is not working. You cannot hear ultrasound.

Location of RRS :

  • Aim the RSCAT unit to the wall so that the sound will ‘bounce around’ and will reflect from walls, ceiling, room contents and floor and will be present throughout the area. Since ultrasound usually does not penetrate walls, it is important that it bounces around corners to cover larger areas. Plug the R-Scat unit into a 230Volts standard wall outlet.
  • Extension cords may be used if necessary. The green LED will act as a breather; it will go on and off to indicate that the unit is working. Leave the RSCAT unit ON 24 hours a day.
  • RSCAT units are designed for indoor use. If used outdoors they should be protected from the weather. Outdoors, there are fewer possibilities for reflection of ultrasound and many things that will absorb or dampen sound, their use is limited.
  • Guarantee : RSCAT units are guaranteed for one year from the date of purchase by the user against defects in materials or workmanship.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us