Swastik Engineering Works

Goregaon, Mumbai, Maharashtra

We are engaged in bringing superior quality Way Manifold Valve, which are high on demand in both the national and international markets. This Way Manifold Valve range is brought to you in an array of dimensions befitting the variety of industrial applications where it is extensively used.

We bring forth 5 Way Manifold Valve that is appreciated for its features such as high performance and superior quality by the clients. Our 5 Way Manifold Valve serve the requirement of diverse industries. We offer 5 Way Manifold Valve in various dimensions to meet the diverse requirements of the clients.

Tiger"Brand 2 Way, 3 Way and 5 WayManifold Valves are multipurpose valves which offers a safe and economical method of installation. They are designed as per applicable standards which are best suited for your requirements. These manifolds are used for direct coupling to a differential pressure transmitter for maximum saving in both installation time and space.

FEATURES

• Available in a variety of end connections.
• Pressure Temperature Rating up to 9000PSI.
• Hydraulic Test Pressure: (BODY) up to 630 Kg/Cm.
• Hydraulic Test Pressure: (SEAT) up to 420 Kg/Cm.
• Pneumatic Test Pressure: up to 40 Kg/Cm.
• They come in standard 54mm or 2.1/8 inch Instrument Connection. Centre distance found in majority of instruments.
• It comes in Remote Mounting (Straight/Flat type) and Direct Mounting (T type)
• Remote Mounting is used for pipe to pipe impulse lines.
• Direct mounting is used for pipe to flange impulse lines.
• Available with Vent and Drain Connection.
• PMI (Positive Material Identification) Test available on request.
• Standards Followed: MSS-SP-99/MSS-SP-61/ASME B1.20.1/B16.11/BS 3799.
• Marking and Identification of Valves as per MSS-SP-25.
• Schematic Flow marked on the valve body.

Tiger"Brand Non-Return valves are equipped with a unique sealing arrangement that transmits pressure directly to the body and provides zero leakage over a long life operations. Non-Return Valves are suitable for pressure up to 6000 PSI. It prevents backflow of the fluid, thereby protecting the equipments or instruments from getting damaged.

FEATURES

• Available in a variety of end connections.
• It can be easily mounted horizontally or vertically.
• It is used in pump suction and discharge lines.
• PMI (Positive Material Identification) Test available on request.
• Hydraulic Test Pressure: up to 420 Kg/Cm.
• Pneumatic Test Pressure: up to 60 Kg/Cm.
• Standards Followed: MSS-SP-99/ASME B16.11/B1.20.1/ISO 228/BS 4368 Part IV/BS 3799.
• Marking and Identification of Valves as per MSS-SP-25.
• Inlet arrow marked on the valve body.

We are offering straight needle valves which are durable and are made available at affordable rates. Widely appreciated for its supreme quality the straight needle valve range can be availed in different specifications. Foremost priority is given by us to customer satisfaction and hence our straight needle valves match international standards.

Tiger"Brand Needle valves offers a comprehensive range of Needle Valves. Our range includes both Integral and Screwed Bonnet designs. These Needle Valves are available in a variety of end connections covering screwed male/female pipe ends and tube ends. They are designed as per applicable standards. It is widely used in gases, liquids and vacuum operations at high pressure and temperature.

FEATURES

• Available in a variety of end connections.
• A swiveling, non-rotating plug which prevents body leakage and ensures positive aligned seating for repeat operations.
• Hydraulic Test Pressure: (BODY) up to 630 Kg/Cm.
• Hydraulic Test Pressure: (SEAT) up to 420 Kg/Cm.
• Pneumatic Test Pressure: up to 7 Kg/Cm.
• PMI (Positive Material Identification) Test available on request.
• Standards Followed: MSS-SP-99/ASME B16.5/B1.20.1/BS 4368 Part IV/BS 3799.
• Marking and Identification of Valves as per MSS-SP-25.
• Inlet arrow marked on the valve body.

Tiger"Brand Angle valves offers a comprehensive range of Angle Valves. These Angle Valves are available in a variety of end connections covering screwed male/female pipe ends and tube ends. They are designed as per applicable standards. It is widely used to change the direction of the flow in a 90 turn.

FEATURES

• Available in a variety of end connections.
• Thread above the gland seal which ensures that the threads are not left wet by the media.
• Panel mounting available as an option.
• Hydraulic Test Pressure: (BODY) up to 420 Kg/Cm.
• Hydraulic Test Pressure: (SEAT) up to 210 Kg/Cm.
• Pneumatic Test Pressure: up to 7 Kg/Cm.
• PMI (Positive Material Identification) Test available on request.
• Standards Followed: MSS-SP-99/ASME B1.20.1/BS 4368 Part IV/BS 3799.
• Marking and Identification of Valves as per MSS-SP-25.
• Inlet arrow marked on the valve body.

Tiger"Brand Globe valves offers a comprehensive range of Globe Valves. For the past decades our customers worldwide have trusted us to provide them with consistent and reliable valve products in their most severe and critical service. Forged steel and Casting valves are designed, manufactured and tested to the latest manufacturing specifications. It is widely used in gases, liquids and vacuum operations at high pressure and temperature. They can throttle the flow and they will not leak even in low pressure when they are shut off.

FEATURES

• Available in a variety of end connections.
• Available in Bolted bonnet, Screwed Bonnet and Integral Bonnet.
• Available in Stainless Steel Spiral wound and Asbestos Graphite gasket for more safety.
• Various types of Coating and Plating used to avoid corrosion.
• NDT (Non Destructive Test) available on request.
• Standards Followed: ASME B16.34/B16.10/B16.5/B16.11/B1.20.1/BS 1873/BS 5146/API 598.
• Marking and Identification of Valves as per MSS-SP-25.
• Inlet arrow marked on the valve body.

Tiger"Brand Gate valves offers a comprehensive range of Gate Valves. For the past decades our customers worldwide have trusted us to provide them with consistent and reliable valve products in their most severe and critical service. Gate Valve are designed to operate fully open or closed. Because they operate slowly they prevent fluid hammer which is detrimental to piping systems. There is very little pressure loss through gate valve. In the fully closed position, gate valves provide a positive seal under pressure.

FEATURES

• Available in a variety of end connections.
• Available in Stainless Steel Spiral wound and Asbestos Graphite gasket for more safety.
• Various types of Coating used to avoid corrosion.
• Hydraulic Test Pressure: (BODY) up to 210 Kg/Cm.
• Hydraulic Test Pressure: (SEAT) up to 150 Kg/Cm.
• Pneumatic Test Pressure: up to 7 Kg/Cm.
• NDT (Non Destructive Test) available on request.
• IBR Form III C will be available on request.
• Standards Followed: ASME B16.34/ B16.11/B1.20.1/BS 1873/API 602/ISO 15761.
• Marking and Identification of Valves as per MSS-SP-25.