GST : 06AAZPA6341D1ZS
Verified
Add Review
Our Products
Drying Ovens
2 Products availableIndustrial Ovens
2 Products availableProduct Prototyping Services
2 Products availableClean Room Equipment
1 Products availableTesting Equipment
1 Products availableIndustrial Valves
1 Products availableOur product range contains a wide range of Curie Temperature Kit, Knuckle Joint Model and petrol engine model
Ovens are double walled, the gap in between walls are filled with thermal insulation, inner chamber is made-up Aluminium and outer made-up m. s. duly powder coated, heater are fitted in ribs of walls and made from Kainthal Wire, temperature is controlled by Thermostat
Air circulation by means of air convection to equalise temperature variations and to remove moisture, working temp range ambient to 300 degree Centigrade
Oven is supplied with two nos perforated selves
Size
a)(300x300x300mm) @3000/=
b) (350x350x350mm) @4000/=
c) (450x450x450mm) @6500/=
d) (600x600x600mm) @9500 /=
Additional Information:
Payment Terms : D/P
Packaging Details : Packing at extra cost
Delivery Time : 2 Weaks
Ovens are double walled, the gap in between walls are filled with thermal insulation, inner chamber is made-up S.S. and outer made-up m. s. duly powder coated, heater are fitted in ribs of walls and made from Kainthal Wire, temperature is controlled by Digital temperature controller (PID microprocessor)
Air circulation by means of air blower to equalise temperature variations and to remove moisture, working temp range ambient to 300 degree Centigrade
Oven is supplied with two nos perforated selves
Size
a) (600x600x600mm) @18000 /=
b) (450x450x450mm)@13000/=
c) (350x350x350mm)@ 10000/=
Same as above but with Natural air convection to equalise temperature variations Size
a)(300x300x300mm) @7000/=
b) (350x350x350mm) @8000/=
c) (450x450x450mm)@11000/=
d) (600x600x600mm) @16000 /=
Additional Information:
Payment Terms : D/P
Packaging Details : Packing at extra cost
Delivery Time : 2 Weaks
Specifications(60x60x60cm)
1 Switches:for blower, LED light & UV light (Anchor made)
2 Pre Filter:-Efficiency 90.00% particle retention >5 micron(SIE made)
4 Air Flow:-Frontward Horizontally
5 Noise Level:60 decibel ±5%
6 Velocity:-0.35-0.50m/sec
7 Work Table:Made of S.S 304 gr.Cock for gas on work table
8 Side Panels:-6mm ±0.5mm thick acrylic sheet
9 Front Door:-Made of acrylic (SIE made)
10 UV lamp:-15/30W, (Imported)
11 Illumination:-9w, LED light with diffuser(philips made)
12 Pressure:-Inclined Manometer 0-25mm range.
13 Power Supply:-230V±10V/50 Hz Single phase A.C
14
Cabinet:19mm thick Dura board covered with mica from outside and epoxy
painted from inside(SIE made)
15
Heavy Duty Blower:-Dynamically balanced with 0.25 HP electric Motor
, mounted on anti vibration pad 1440 rpm motor(American universal)
1 Prices are F.O.R Ambala.
2 Frieght and packing extra.
3 GST extra.
4 100% payment before delivery.
HEPA Filter :ISO 14644 Class 5 (class 100) efficiency 99.9%(SIE made)down
particle retention >0.3 micron with 3 mesh guard protection.
Additional Information:
Payment Terms : D/P
Packaging Details : Packing at extra cost
Delivery Time : 2 Weaks
Ambala Cantt, Ambala, Haryana 
