Our Products
Brass & Copper Products
2 Products availableElectrical Cables & Wires
1 Products availableMetal & Metal Products
1 Products availableOur product range contains a wide range of Pvc Insulated Copper Wires, PVC Insulated Copper Wires and Cables, Bare Copper Wire, Enamelled Copper Wire and Paper Covered Copper Wires and Strips
Typical Applications
Single Core Flexible Cables ConfirmingTo IS 694-1990 Voltage Grade up to 1100 Volts.
Conductors: The process involves drawing of thin conductors from bright electrolytic grade copper rods (99.9% pure) and annealed conductors are bunched together.
Insulations: Specially formulated grade of FRPVC compound is capable of with standing higher conductor temperatures. Continuous rating of 105C and intermittent rating of 125C enables the cable to be overload without endangering safety. The insulation is resistant to boiling water , stream and vapours to prevent aging and cracking in practical usage in kitchens, bathrooms, damp walls, chemical industries etc.
Quality Control: FRPVC insulated copper conductor (unheated) wire and cables are manufactured in sizes from 0.50 to 16 sq.mm. in single core. High quality standards are in-built in Minimax Cables. Strict quality control at every stage from raw material, production and finely at finish products ensure that the Minimax cables meet National & International standards. The cables are confirm to ISI standards which offers complete safety and protection against electrical shocks, short circuits and fires.
| PRODUCTCODE | NOMINALAREA OF CONDUCTOR | NOAND DIAMETER OF WIRES | NOMINALTHICKNESS OF INSULATION | APPROXOVERALL DIAMETER OF WIRE | CURRENTCARRYING CAPACITY 2 CABLES SINGLE PHASE AC/DC | RESISTANCE(MAX) PER KM. @ 20°C | ||||
| IN SQ. MM. | IN MM | IN MM | IN MM | IN AMPS. | IN OHMS | |||||
| MULTISTRAND | ||||||||||
| MC 010 | 1.0 | 14/0.3 | 0.7 | 2.8 ± 0.1 | 12 | 18.1 | ||||
| MC 020 | 1.5 | 22/0.3 | 0.7 | 3.1 ± 0.1 | 16 | 12.1 | ||||
| MC 030 | 2.5 | 36/0.3 | 0.8 | 3.8 ± 0.1 | 22 | 7.41 | ||||
| MC 040 | 4.0 | 56/0.3 | 0.8 | 4.4 ± 0.1 | 29 | 4.95 | ||||
| MC 050 | 6.0 | 84/0.3 | 0.8 | 5.2 ± 0.1 | 37 | 3.30 | ||||
|
||||||||||
| MC 110 | 1/18 | 1/1.12 | 0.7 | 2.8 ± 0.1 | 5 | 17.51 | ||||
| MC 120 | 3/22 | 3/0.71 | 0.8 | 3.1 ± 0.1 | 10 | 13.76 | ||||
| MC 140 | 3/20 | 3/0.91 | 0.9 | 3.6 ± 0.1 | 15 | 8.92 | ||||
| MC 150 | 7/20 | 7/0.91 | 1.1 | 5.1 ± 0.1 | 28 | 3.81 | ||||
| MC 160 | 7/18 | 7/1.12 | 1.3 | 6.5 ± 0.1 | 36 | 2.55 | ||||
Enamelled Copper Wire or Enamelled Aluminum Wire is used in the construction of transformers, inductors, motors, headphones, loudspeakers, hard drive headpositionable, potentiometers, and electromagnets, and many more applications. Enameled wireis covered with thin insulation. Enameled copper wire typically uses one to three layers of polymer film insulation, to provide a tough, continuous insulating layer.
Enamelled Copper Wireor Enamelled Aluminum WireTypical Applications
| ENAMEL BASE | MODIFIED POLYSTERÂ PE(MODIFIED) |
POLYSTERMIDEÂ (P.I.E.) | POLYSTERMIDEÂ POLYAMIDE-IMIDE (PEI+PAI) | POLYMIDE-IMIDEÂ (PAI) |
| THERMAL/INSULATION CLASS | I55°  ‘F’ CLASS | 180°  ‘H’ CLASS | 200° DUAL COTED | 220°  ‘C’  CLASS |
| SPECIFICATION OLD IS: NEW IS: IEC: |
IS:4800-V2 IS: 13730 – 3 IEC 317 – 3 |
IS:4800-9 IS: 13730 -8 IEC 317 – 8 |
IS:4800-13 IS: 13730 -13 IEC 317 – 13 |
IS:4800-11 IS: 13730 -7 IEC 317 – 7 |
| COLOUR OFÂ ENAMELED WIRES | DARK & LIGHT BROWN | DARK BROWN | MEDIUM – DARK BROWN | BROWN |
| GENERALÂ APPLICATIONS | General Purpose Roting & Static Electrical Equipments, F.H.P. Motors, Transformers, etc |
F.H.P. Motors for hand tools Hermatic Applications, Ignition Coils & All Thermal Class 180 Equipments. |
Hermatic Applications Special Purpose Motors & All Thermal Class 200 Equipments |
Special Motors Hermatic Motors |
| SPECIAL REMARKS | Good Thermal & Die-Electric Properties |
Resistance against Refrigerant & Transformer Oil, High Burnout Resistance etc. |
Air Crack Registance against refrigerants & Chemicals very high burnout resistance, excellent Windablity low co-efficient of fraction High slotfilled factor & improved obrasion resistant. |
Air Crack Resistant again Refrigent & Chemicals very high burnout resistant, excellent Windability low co-efficient of friction High slotfill factor & abrasion resistance. |
| LIMITATIONS | Oil-filled Transformers, Rotating Machines used by Railway Hermetic Motors. |
 |  |  |
| TECNICAL SPECIFICATIONS ABRASION RESISTANCE / MECHANICAL PROPERTIES |
Fair / Good | Very Good / Good | Excellent / Excellent | Excellent / Excellent |
| RESISTANCE TO VARNISHES AND SOLVENT |
Good | Very Good | Excellent | Excellent |
| RESISTANCE TO FREON-22 |
– | Very Good | Superb | Excellent |
| FELXIBILITY AND ADHERENCE | Good | Very Good | Superb | Excellent |
| CUT-THROUGH / HEAT SHOCK | 240°C / 200°C | 300°C / 200°C | 320°C / 220°C | 400°C / 240°C |
For winding in oil-cooled transformer, we offer a wide range of winding wires whose insulation is compatible with synthetic and in mineral-oil based cooling agents. Paper-insulated flat and Round wires are manufactured as individual conductor or as multi-conductor (twin or triple). The conductor can be bare rectangular / round copper or enamel rectangular / round copper.
We have facility to provide insulation thickness up to 5.00mmover Copper / Aluminium conductors.
We apply following basic types of insulation on Copper /Aluminium
Quality: We manufacture according to the quality assurance standardsof BIS and IES. We are equipped with total set of in housetesting facilities to meet the requirement of standered inorder to defect free products.
Our Target: To provide Qualitative products at competitive price withprompt delivery.
| Item | Specification | Application |
| Nomax Covered Round and Rectangular Copper / Aluminium Conductors | BIS 11174 – 1984 (Temperature Index 220ºC) | UPS Systems Winding of Transformers |
| Paper Covered Round and Rectangular Copper Conductors | BIS 7404 PartI and II (Temperature Index 90º & 105º) | Winding of Transformers |
| Cotton Covered Round and Rectangular Copper / Aluminum Conductors | BIS 7391 Part I & II (Temperature Index 90º) | Winding of dry type transformers |
| Bare Round and Rectangular Copper / Aluminium Conductors | BIS 6160, BIS 1897 | Winding coils of Electric Machines |
| Paper Covered Round and Rectangular Aluminium Conductors | BIS 6161 Part I & II (Temperature Index 90º & 105º) | Winding of Transformers |
| Nomax / Paper / Cotton Insulated Twin / Triple / Bunched round and Rectangular Copper and Aluminium Conductors | manufactured as per customer specifications. | Special type transformers, Electrical Machines. |
For winding in oil-cooled transformer, we offer a wide range of winding wires whose insulation is compatible with synthetic and in mineral-oil based cooling agents. Paper-insulated flat and Round wires are manufactured as individual conductor or as multi-conductor (twin or triple). The conductor can be bare rectangular / round copper or enamel rectangular / round copper.
We have facility to provide insulation thickness up to 5.00mmover Copper / Aluminium conductors.
We apply following basic types of insulation on Copper /Aluminium
Quality: We manufacture according to the quality assurance standardsof BIS and IES. We are equipped with total set of in housetesting facilities to meet the requirement of standered inorder to defect free products.
Our Target: To provide Qualitative products at competitive price withprompt delivery.
Typical Applications:
| Item | Specification | Application |
| Nomax Covered Round and Rectangular Copper / Aluminium Conductors | BIS 11174 – 1984 (Temperature Index 220ºC) | UPS Systems Winding of Transformers |
| Paper Covered Round and Rectangular Copper Conductors | BIS 7404 PartI and II (Temperature Index 90º & 105º) | Winding of Transformers |
| Cotton Covered Round and Rectangular Copper / Aluminum Conductors | BIS 7391 Part I & II (Temperature Index 90º) | Winding of dry type transformers |
| Bare Round and Rectangular Copper / Aluminium Conductors | BIS 6160, BIS 1897 | Winding coils of Electric Machines |
| Paper Covered Round and Rectangular Aluminium Conductors | BIS 6161 Part I & II (Temperature Index 90º & 105º) | Winding of Transformers |
| Nomax / Paper / Cotton Insulated Twin / Triple / Bunched round and Rectangular Copper and Aluminium Conductors | manufactured as per customer specifications. | Special type transformers, Electrical Machines. |
Gokul Road, Hubli, Karnataka 