Swajit Engg. Pvt. Ltd. Aurangabad, Maharashtra

we offer slat conveyor chain. description this type of conveyor chain are being used for vehicle assembly line, paint line, engine assembly line, shower testing, trim line, chassis lay down, buffer storage system, oven and car parking in automobile sector etc. as these chains are working at very low speed and frequent stoppages at defined stages, higher degree of accuracy is achieved with special process followed by heat treatment. these chains are supplied with rollers assembled with bearings to have smooth functioning of chain . pusher plates are provided for pusher dog mounting as per customer requirement . alternative sizes are also available on request.

we offer drag redler chain. many industries used such types of drag & redler chains to maintain the constant flow of material like cement, coal, chemical, powder and small wooden logs etc.for further processing work . pins and bushes are made from alloy steel duly heat treated . the flat plates are either welded or bolted as per requirement to maintain the required flow . such types of drag & flow conveyor chains are also available in flat links, pin, bush and roller design along with the scrapper plate in single and double strand, as per requirement . the tensile strength ranging from 10, 000 kgf to 80, 000 kgf . alternative sizes are also available on request .

This type of conveyor chain is mainly used in captive power plants, power plants to feed coal from storage hopper to the boiler. This chain is suitable in abrasive, higher temperature & dusty conditions. Prcised alignment of chain with sprocket due to appropriate tolerance is maintained by precision manufacturing processes. Maximum chain strength & wear resistance is achieved by selection of appropriate raw material. We are exercising the strict control on procurement of genuine raw material as per specifications & adopting modern heat treatment in-house processes. As a result the components subjected to sprocket are able to withstand the sprocket tooth impact. Chain links are made from medium carbon alloy steel. These links are subjected to operations like blanking & fine boaring, which are carried out on highly precision machines. The link hole size & finishing is controlled to suit adequate interference fit. Further links are hardened & tempered to avoid linear elongation & to get better impact strength followed by shot peening process to improve the fatigue strength. Special alloy steel is used for pins with volume hardened & tempered to get the maximum core strength & followed by induction hardening to achieve armored case depth for maximum wear resistance. Special alloy steel is used for bushes with adequate heat treatment. Optimum case depth is achieved to provide maximum wear resistance & core strength by case carburizing. Medium carbon steel is used for rollers with appropriate heat treatment. Alternative sizes are available on request.

The wide variety of Inter carrier chains are manufactured with Breaking Strength in the range from 20, 000 kgf. To 130, 000 kgf. Chain links are made from Low Carbon & Medium Carbon Forged Steel. These links are subjected to the precision machining with their mating parts to Pin & Bush duly heat treated to avoid linear elongation & to get better strength. Shot penning is performed for links to improve fatigue strength. Pin & Bushes are made from Stainless Steel (Austenitic & Martensitic) with precision machining, followed by through Hardening & Tempering in case of Martensitic Stainless-Steel to increase the Wear Resistance & then ground finishing is done for perfect fitting. Alternative sizes are also available on request.

These types of chains are used in stacking of sugar bags .

Different type of pitch is maintained as per stacker construction .

These chains are robust in design as these are working under high speed comparatively .

This is very specialized conveyor chain used in Rope-way for conveying Limestone & Coal from mines to stacker. we regularly supplying this chains to many Cement plants.

These type of Travelling Grate chains are used in Power plants & Co-generation Power plants in Sugar Industries .

This type of Travelling grate chain is suitable in Boiler, higher temperature & dusty conditions. Precised alignment of chain with sprocket due to appropriate tolerance is maintained by precision manufacturing processes.

Maximum chain strength & wear resistance is achieved by selection of appropriate raw material. We are exercising the strict control on procurement of genuine raw material as per specifications & adopting modern heat treatment in-house processes. As a result the components subjected to sprocket are able to withstand the sprocket tooth impact.

Chain links are made from Medium Carbon / Alloy Steel. These links are subjected to operations like Blanking & fine boring, which are carried out on highly precision machines. The link hole size & finishing is controlled to suit adequate interference fit. Further links are hardened & tempered to avoid linear elongation & to get better impact strength followed by shot penning process to improve the fatigue strength.

Special Alloy Steel is used for Pins with Volume Hardened & Tempered to get the maximum core strength & followed by Induction Hardening to achieve armored case depth for maximum wear resistance.

This type of Appron feeder Chain are mainly used in Cement Industries *Fully heat treated material. *Closely controlled tolerances. *Pins are Induction hardened. *Suited for very Abrasive condition.

we are offering Drag Enmass Conveyor Chain.

These type of Gate conveyor chains are used in Power Plants.

This chain is suitable in abrasive, higher temperature & dusty conditions. Precised alignment of chain with sprocket due to appropriate tolerance is maintained by precision manufacturing processes.

Maximum chain strength & wear resistance is achieved by selection of appropriate raw material. We are exercising the strict control on procurement of genuine raw material as per specifications & adopting modern heat treatment in-house processes. As a result the components subjected to sprocket are able to withstand the sprocket tooth impact.

Chain links are made from Medium Carbon / Alloy Steel. These links are subjected to operations like Blanking & fine boring, which are carried out on highly precision machines. The link hole size & finishing is controlled to suit adequate interference fit. Further links are hardened & tempered to avoid linear elongation & to get better impact strength followed by shot penning process to improve the fatigue strength.

Special Alloy Steel is used for Pins with Volume Hardened & Tempered to get the maximum core strength & followed by Induction Hardening to achieve armored case depth for maximum wear resistance. Special Alloy Steel is used for Bushes with adequate heat treatment. Optimum case depth is achieved to provide maximum wear resistance & core strength by Case Carburizing. Medium Carbon Steel is used for Rollers with Appropriate Heat Treatment.

Crushed raw materials like Lime Stone & Coal stored in bulk on the ground under shed or Silos, are moved by Reclaimer Chain.

Chain links for Scrapper Reclaimer chain are made from Medium Carbon / Alloy Steel. These links are subjected to operations like Blanking & fine boring, which are carried out on highly precision machines. The link hole size & finishing is controlled to suit adequate interference fit. Further links are hardened & tempered to avoid linear elongation, to get better impact strength followed by shot penning process to improve the fatigue strength.

Special Alloy Steel is used for Pins & Bushes with Case Carburized Hardening & Tempering process to get the maximum wear resistance & core strength.

These type of Scrapper Reclaimer Chains are also manufactured with Out-Board type Rollers.

Roller ID & OD with through hardening & further Induction Hardening is provided to get proper Case Depth to achieve maximum wear life.

The wide variety of Inter carrier chains are manufactured with Breaking Strength in the range from 20, 000 kgf. To 130, 000 kgf. Chain links are made from Low Carbon & Medium Carbon Forged Steel. These links are subjected to the precision machining with their mating parts to Pin & Bush duly heat treated to avoid linear elongation & to get better strength. Shot penning is performed for links to improve fatigue strength. Pin & Bushes are made from Stainless Steel (Austenitic & Martensitic) with precision machining, followed by through Hardening & Tempering in case of Martensitic Stainless-Steel to increase the Wear Resistance & then ground finishing is done for perfect fitting. Alternative sizes are also available on request.

we are offering Range Attachment Links.