Offers enmass conveyor chain (redler).Many industries used such types of chains to maintain the constant flow of material like cement, coal, chemical, powder and small wooden logs etc. For further processing work. Pins and bushes are made from alloy steel duly heat treated. The flat plates are either welded or bolted as per requirement to maintaine the required flow. Such types of chains are also available in flat links, pin, bush and roller design along with the scrapper plate in single and double strand, as per requirement. The tensile strength ranging from 10, 000 kgf to 80, 000 kgf. Alternative sizes are also available on request.

We are offering conveyor chain for varnishing machine - swajit 4401.

This type of Conveyor Chain are being used for Vehical Assembly line, Paint Line, Engine Assembly Line, Shower Testing, Trim Line, Chassis lay down, Buffer Storage System, Oven and Car Parking in Automobile sector etc.

As these chains are working at very low speed and frequent stoppages at defined stages, higher degree of accuracy is achieved with special process followed by heat treatment. These chains are supplied with Rollers assembled with Bearings to have smooth functioning of chain .

Pusher plates are provided for Pusher Dog mounting as per Customer Requirement .

This type of Conveyor Chain are being used for Vehical Assembly line, Paint Line, Engine Assembly Line, Shower Testing, Trim Line, Chassis lay down, Buffer Storage System, Oven and Car Parking in Automobile sector etc.

As these chains are working at very low speed and frequent stoppages at defined stages, higher degree of accuracy is achieved with special process followed by heat treatment. These chains are supplied with Rollers assembled with Bearings to have smooth functioning of chain .

We are offering redler chain.

Many Industries used such types of Drag & Redler chains to maintain the constant flow of material like Cement, Coal, Chemical, Powder and Small wooden logs etc.for further processing work .

Pins and Bushes are made from Alloy steel duly Heat treated .

The flat plates are either welded or bolted as per requirement to maintain the required flow .

Such types of Drag & Flow conveyor Chains are also available in flat links, Pin, Bush and Roller design along with the Scrapper plate in Single and double Strand, as per requirement .

The Tensile strength ranging from 10, 000 kgf to 80, 000 kgf .

Many Industries used such types of Drag & Flow conveyor chains to maintain the constant flow of material like Cement, Coal, Chemical, Powder and Small wooden logs etc.for further processing work .

Pins and Bushes are made from Alloy steel duly Heat treated .

The flat plates are either welded or bolted as per requirement to maintain the required flow .

Such types of Drag & Flow conveyor Chains are also available in flat links, Pin, Bush and Roller design along with the Scrapper plate in Single and double Strand, as per requirement .

The Tensile strength ranging from 10, 000 kgf to 80, 000 kgf .

Many Industries used such types of En-mass (Drag) chains to maintain the constant flow of material like Cement, Coal, Chemical, Powder and Small wooden logs etc.for further processing work .

Pins and Bushes are made from Alloy steel duly Heat treated .

The flat plates are either welded or bolted as per requirement to maintain the required flow .

Such types of En-mass (Drag) conveyor Chains are also available in flat links, Pin, Bush and Roller design along with the Scrapper plate in Single and double Strand, as per requirement

These type of Travelling Grate chains are used in Power plants & Co-generation Power plants in Sugar Industries .

This type of Travelling grate chain is suitable in Boiler, higher temperature & dusty conditions. Precised alignment of chain with sprocket due to appropriate tolerance is maintained by precision manufacturing processes.

Maximum chain strength & wear resistance is achieved by selection of appropriate raw material. We are exercising the strict control on procurement of genuine raw material as per specifications & adopting modern heat treatment in-house processes. As a result the components subjected to sprocket are able to withstand the sprocket tooth impact.

Chain links are made from Medium Carbon / Alloy Steel. These links are subjected to operations like Blanking & fine boring, which are carried out on highly precision machines. The link hole size & finishing is controlled to suit adequate interference fit. Further links are hardened & tempered to avoid linear elongation & to get better impact strength followed by shot penning process to improve the fatigue strength.

Special Alloy Steel is used for Pins with Volume Hardened & Tempered to get the maximum core strength & followed by Induction Hardening to achieve armored case depth for maximum wear resistance.

Offers enmass conveyor chain (redler).Many industries used such types of chains to maintain the constant flow of material like cement, coal, chemical, powder and small wooden logs etc. For further processing work. Pins and bushes are made from alloy steel duly heat treated. The flat plates are either welded or bolted as per requirement to maintaine the required flow. Such types of chains are also available in flat links, pin, bush and roller design along with the scrapper plate in single and double strand, as per requirement. The tensile strength ranging from 10, 000 kgf to 80, 000 kgf. Alternative sizes are also available on request.

We are offering conveyor chain for varnishing machine - swajit 4401.

This type of Conveyor Chain are being used for Vehical Assembly line, Paint Line, Engine Assembly Line, Shower Testing, Trim Line, Chassis lay down, Buffer Storage System, Oven and Car Parking in Automobile sector etc.

As these chains are working at very low speed and frequent stoppages at defined stages, higher degree of accuracy is achieved with special process followed by heat treatment. These chains are supplied with Rollers assembled with Bearings to have smooth functioning of chain .

Pusher plates are provided for Pusher Dog mounting as per Customer Requirement .

This type of Conveyor Chain are being used for Vehical Assembly line, Paint Line, Engine Assembly Line, Shower Testing, Trim Line, Chassis lay down, Buffer Storage System, Oven and Car Parking in Automobile sector etc.

As these chains are working at very low speed and frequent stoppages at defined stages, higher degree of accuracy is achieved with special process followed by heat treatment. These chains are supplied with Rollers assembled with Bearings to have smooth functioning of chain .

We are offering redler chain.

Many Industries used such types of Drag & Redler chains to maintain the constant flow of material like Cement, Coal, Chemical, Powder and Small wooden logs etc.for further processing work .

Pins and Bushes are made from Alloy steel duly Heat treated .

The flat plates are either welded or bolted as per requirement to maintain the required flow .

Such types of Drag & Flow conveyor Chains are also available in flat links, Pin, Bush and Roller design along with the Scrapper plate in Single and double Strand, as per requirement .

The Tensile strength ranging from 10, 000 kgf to 80, 000 kgf .

Many Industries used such types of Drag & Flow conveyor chains to maintain the constant flow of material like Cement, Coal, Chemical, Powder and Small wooden logs etc.for further processing work .

Pins and Bushes are made from Alloy steel duly Heat treated .

The flat plates are either welded or bolted as per requirement to maintain the required flow .

Such types of Drag & Flow conveyor Chains are also available in flat links, Pin, Bush and Roller design along with the Scrapper plate in Single and double Strand, as per requirement .

The Tensile strength ranging from 10, 000 kgf to 80, 000 kgf .

Many Industries used such types of En-mass (Drag) chains to maintain the constant flow of material like Cement, Coal, Chemical, Powder and Small wooden logs etc.for further processing work .

Pins and Bushes are made from Alloy steel duly Heat treated .

The flat plates are either welded or bolted as per requirement to maintain the required flow .

Such types of En-mass (Drag) conveyor Chains are also available in flat links, Pin, Bush and Roller design along with the Scrapper plate in Single and double Strand, as per requirement

These type of Travelling Grate chains are used in Power plants & Co-generation Power plants in Sugar Industries .

This type of Travelling grate chain is suitable in Boiler, higher temperature & dusty conditions. Precised alignment of chain with sprocket due to appropriate tolerance is maintained by precision manufacturing processes.

Maximum chain strength & wear resistance is achieved by selection of appropriate raw material. We are exercising the strict control on procurement of genuine raw material as per specifications & adopting modern heat treatment in-house processes. As a result the components subjected to sprocket are able to withstand the sprocket tooth impact.

Chain links are made from Medium Carbon / Alloy Steel. These links are subjected to operations like Blanking & fine boring, which are carried out on highly precision machines. The link hole size & finishing is controlled to suit adequate interference fit. Further links are hardened & tempered to avoid linear elongation & to get better impact strength followed by shot penning process to improve the fatigue strength.

Special Alloy Steel is used for Pins with Volume Hardened & Tempered to get the maximum core strength & followed by Induction Hardening to achieve armored case depth for maximum wear resistance.