Sheet 6082(T651), Aluminium Alloy Plate Sheet 5052, Aluminium Alloy Plate Sheet 6061 T651, Aluminium Alloy Plate Sheet 5086, Aluminium Alloy Plate Sheet 3003-h14, Aluminium Sheet And Plate 2024, Aluminium Alloy Plate Sheet 1050 '0' (Soft), Aluminium Alloy Plate Sheet 2014, Aluminium Alloy Plate Sheet 5251 - H24, 2024 Aluminium Alloy Plate Sheet And Plate

Aluminium alloy 5083 contains 5.2% magnesium, 0.1% manganese and 0.1% chromium. In the tempered condition, it is strong, and retains good formability due to excellent ductility. 5083 has high resistance to corrosion, and is used in marine applications. It has the low density and excellent thermal conductivity common to all aluminium alloys.

Typical Applicationsrequire a weldable alloy of high to moderate strength, with good corrosion resistance. Marine applications, unfired welded pressure vessels, TV towers, drilling rigs, transportation equipment, armour plate.

DescriptionAluminium 5083 is a strong magnesium-manganese-chromium-aluminium alloy. It can be hardened by cold work, but is not heat treatable to higher strength. It has good ductility for the strength level, better than most other 5000 series alloys (see figure).

Corrosion ResistanceAlloy 5083 has excellent resistance to general corrosion, and is used in marine applications. Resistance is excellent in aqueous solutions in the pH range 4 9. The corrosion resistance of aluminium alloys relies on a protective surface oxide film, which when damaged is readily repaired by the rapid reaction between aluminium and oxygen. However, the high reactivity of the base metal can give rapid corrosion if the film cannot be repaired, so aluminium alloys are not suitable for use with reducing media. Alloy 5083 can be anodised to improve the corrosion resistance by thickening the protective surface film.

Alloy 5083 can be susceptible to exfoliation corrosion in severe applications. Material in the H116 temper is least susceptible, and passes the ASTM G66 Exfoliation Susceptibility Test (ASSET Test). AS 1734 suggests alloy 5083 should not be used above 65C.

Pressure VesselsAS1210 Pressure Vessels prequalifies alloy 5083 for pressure service for temperatures up to 65C in the O, H112 & H321 tempers.

We offer hastelloy sheets and plates that are designed and fabricated using top grade materials that comply with international quality standards. These are made of premium quality of stainless steel and can be customized in designs, dimensions and sizes as per requirements of clients.
Features:

High quality and low price
Competitive prices
No maintenance required
Grades as under:

Hastelloy C-4 (UNS No. N06455)
C-276 (UNS No. N10276)
Hastelloy C 22 (UNS No. N06022)
Hastelloy C 2000

We manufacture these rods using high-grade metal alloys that are in compliance with International Quality Standards. Our Hastelloy Rods are custom tailored and are in widespread uses. Our range of rods is known for their high tensile strength, corrosion resistance and durability. These Rods are offered in different grades and are in surplus demands.
Features:

Good quality & competitive prices
High tensile strength
Durable and long lasting
Grades:

Hastelloy C-4 (UNS No. N06455)
Hastelloy C-276 (UNS No. N10276)
Hastelloy C 22 (UNS No. N06022)
Hastelloy C 2000

We Swagat steel and alloys offer a comprehensive range of hastelloy round bars, in grades Hastelloy C276 and others. Known for resistant to general corrosion, crevice corrosion, inter granular attack, pitting and stress corrosion cracking, our range of haselloy round bars are widely used by our clients throughout the world.
Standard:ASTM / ASME SB 574
Size range:3.17mm to 350mm diameter

Grades:Hastelloy C276 (UNS No. N10276),

Sheet 6082(T651), Aluminium Alloy Plate Sheet 5052, Aluminium Alloy Plate Sheet 6061 T651, Aluminium Alloy Plate Sheet 5086, Aluminium Alloy Plate Sheet 3003-h14, Aluminium Sheet And Plate 2024, Aluminium Alloy Plate Sheet 1050 '0' (Soft), Aluminium Alloy Plate Sheet 2014, Aluminium Alloy Plate Sheet 5251 - H24, 2024 Aluminium Alloy Plate Sheet And Plate

Aluminium alloy 5083 contains 5.2% magnesium, 0.1% manganese and 0.1% chromium. In the tempered condition, it is strong, and retains good formability due to excellent ductility. 5083 has high resistance to corrosion, and is used in marine applications. It has the low density and excellent thermal conductivity common to all aluminium alloys.

Typical Applicationsrequire a weldable alloy of high to moderate strength, with good corrosion resistance. Marine applications, unfired welded pressure vessels, TV towers, drilling rigs, transportation equipment, armour plate.

DescriptionAluminium 5083 is a strong magnesium-manganese-chromium-aluminium alloy. It can be hardened by cold work, but is not heat treatable to higher strength. It has good ductility for the strength level, better than most other 5000 series alloys (see figure).

Corrosion ResistanceAlloy 5083 has excellent resistance to general corrosion, and is used in marine applications. Resistance is excellent in aqueous solutions in the pH range 4 9. The corrosion resistance of aluminium alloys relies on a protective surface oxide film, which when damaged is readily repaired by the rapid reaction between aluminium and oxygen. However, the high reactivity of the base metal can give rapid corrosion if the film cannot be repaired, so aluminium alloys are not suitable for use with reducing media. Alloy 5083 can be anodised to improve the corrosion resistance by thickening the protective surface film.

Alloy 5083 can be susceptible to exfoliation corrosion in severe applications. Material in the H116 temper is least susceptible, and passes the ASTM G66 Exfoliation Susceptibility Test (ASSET Test). AS 1734 suggests alloy 5083 should not be used above 65C.

Pressure VesselsAS1210 Pressure Vessels prequalifies alloy 5083 for pressure service for temperatures up to 65C in the O, H112 & H321 tempers.

We offer hastelloy sheets and plates that are designed and fabricated using top grade materials that comply with international quality standards. These are made of premium quality of stainless steel and can be customized in designs, dimensions and sizes as per requirements of clients.
Features:

High quality and low price
Competitive prices
No maintenance required
Grades as under:

Hastelloy C-4 (UNS No. N06455)
C-276 (UNS No. N10276)
Hastelloy C 22 (UNS No. N06022)
Hastelloy C 2000

We manufacture these rods using high-grade metal alloys that are in compliance with International Quality Standards. Our Hastelloy Rods are custom tailored and are in widespread uses. Our range of rods is known for their high tensile strength, corrosion resistance and durability. These Rods are offered in different grades and are in surplus demands.
Features:

Good quality & competitive prices
High tensile strength
Durable and long lasting
Grades:

Hastelloy C-4 (UNS No. N06455)
Hastelloy C-276 (UNS No. N10276)
Hastelloy C 22 (UNS No. N06022)
Hastelloy C 2000

We Swagat steel and alloys offer a comprehensive range of hastelloy round bars, in grades Hastelloy C276 and others. Known for resistant to general corrosion, crevice corrosion, inter granular attack, pitting and stress corrosion cracking, our range of haselloy round bars are widely used by our clients throughout the world.
Standard:ASTM / ASME SB 574
Size range:3.17mm to 350mm diameter

Grades:Hastelloy C276 (UNS No. N10276),