SWA Systems India Pvt Ltd

Kumaraswamy Layout, Bangalore, Karnataka

SWA Order No: SWA-1080-A1-R0

Features:

• Used for signal checking
• Servicing of 3U rack cards with Harting connector

SWA Order No: SWA-1022-A1-R0

Technical Data:

• Based on SIEMENS PLC S7 214
• Provision for 2 analog input and 2 analog output modules
• 10 digital output 24V DC
• 14 digital input 24V DC
• Power Supply 230V.
• Works on SIEMENS MICROWIN software.
• Digital outputs are displayed by indication lamp on the panel
• Inputs can be given through push buttons selector switch, emergency stock push buttons.
• Analog inputs can be given through potentiometer

Ready to install 2/4 Option Coffee vending M/C control Board

SWA Order No. :SWA-1034-A1-R0SWA-1034A-A1-R0

Characteristics:

• 12V DC power supply
• Microcontroller based control unit with 2x20 character LCD display , multifunction push buttons with Led indication
• RS 232 communication
• RFID Card reader for e-billing facility

General purpose board for microcontrollers 8051 , 892051 with Seven segment display , LCD , Separate connector for Inputs and Serial port for interfacing.

SWA Order No. :SWA-1026-A1-R0

SWA Order No. :SWA-1076-A1-R0

Application:

The logic controller for bakery mixer which is designed for preparing dough for all types of bread and confectionery products in the mixer.

Technical Data:

• 8 input optically isolated 0-24V.
• 10 relay output @ 6A

SWA Order No. : SWA-1075-A1-R0Application: For Drive Control

Technical Data

SWA Order No. :Receiver : SWA-1023-A1-R0 Transmitter : SWA-1023A-A1-R0

IR operated module is for remote control of lifting of heavy loads , movement of cranes up to 8 meter range with line of sight communication.

Technical Data:

• 110/230V AC power supply
• 8 Relay outputs with LED indication
• Microcontroller based
• Operating range up to 8 m
• AA size battery operated transmitter with compact size
• Up, Down , Right and left keys are available

SWA Order No : SWA-1093-A1-R0

Features

• A/D and D/A functions are achieved using IC AD3964RJD, AD390JD
• This card can be interfaced with CPU PE-2080
• This card can replace PE-2029

SWA Order No. :SWA-1035-A1-R0

POWER SUPPLY FOR SIWAREX , 5V AND 15V WITH RELAY LOGIC

Technical Data:

• SIEMENS SIWAREX weighing system
• Power supply for control card
• Inbuilt in SIWAREX-P
• 7MH4205-1AC01 module.

SWA Order No : SWA-1094-A1-R0

Features

• 2 Channel proportional amplifier
• Maximum current 800mA
• Operating frequency 200Hz
• This card can replace PE-2025
• This card can be interfaced with CPU PE-2080

SWA Order No : SWA-1092-A1-R0

Features

• Z80 CPU based Computer.
• Used to control the Hydraulic Control of Wheel and Axle Plant Press
• Supports analog and digital signals in expanded rack
• This card can replace PE-2080

SWA Order No : SWA-1095-A1-R0

Features

• This card is used for running hydraulic pumps
• This card can be interfaced with CPU PE-2080
• This card can replace PE-2008

SWA Order No : SWA-1105-A1-R00

Features

• Used with SIEMENS 6RA22 DC drive
• Equivalent to C98043-A1604-L1
• Used for thyristor gate firing circuit.
• Snubber Circuit is built into it.

SWA Order No : SWA-1109-A1-R0

Features

• Magnetization & Demagnetization circuit for Conveyer System

SWA Order No : SWA-1038A-A1-R0

Features

• Separate cards mounted in 6U rack facilitating easy maintenance and test
• 200W Programmable DC power supplies with built in RS-232 & RS-485 interface with GPIB optional.
• Easy availability of voltages and resistances on facia
• Flashing through BDM connector on Facia
• Used in automobile industry for testing ECU
• Application: Test ZIG using in Automobile Industry

SWA Order No. : SWA-1021-A1-R0

Technical Data:

• On delay and Off delay timer with preset value 0- 99 secs / minutes / Hrs
• Timer with relay output , 12V and 5V outputs

SWA Order No : SWA-1006-A1-R1

Technical Data

• Built with 66 keys both function & numerical keys
• Communicate with R series computer on 3964R Protocol
• Ruggedly built for industrial application

SWA Order No : SWA-1006-A2-R1

Technical Data

• Built with 128 keys both function & numerical keys
• Communicate with R series computer on 3964R Protocol
• Ruggedly built for industrial application

Technical Data

SWA Order No. :SWA-1100-A1-R0

Applications:

• Micro Controller Based Level Controller
• Three Relays can be programmed to make it on at different levels
• Can be used for pump controller
• Can be used with any sensor to control different control system activities
• Can be programmed without any devices.

SWA-1071-A1-R1

Application:

The logic controller for bakery oven which is designed and used for baking all types of bread and confectionery products in the oven. Each with variable temperature setting, automatic steaming and steam time setting, baking time setting etc.

Characteristics:

Display the Current and Set Temperature Setting the Time for Baking and Steaming Customized settings to be saved User Defined Quick start, Burner Status (On/Off), Blower Motor , Blower Motor Status, Photocell , Power failure memory backup

SWA Order No : SWA-1099-A1-R0

Technical data

• 0-40A to 0-10V
• 24V power supply
• Microcontroller based.
• Can be programmed for any signals for 3 levels to operate 3 relays
• Signal is 0-10V

SWA Order No. : SWA-1007-A1-R1

Features:

• Pulse amplifier assembly equivalent to 6QN1013-3AD

Microcontroller Based Proportional Amplifier with LCD Display for Valve control. This module is suitable for control of proportional directional valves and pressure valves without position feedback.

Technical Data:

• Four command values adjustable with potentiometers
• Differential input
• Step function generator
• Ramp generator with five ramp times
• Two pulsed current output stages
• LCD display of parameters namely command value(W) and solenoid current (IA & IB) using PIC-Microcontroller
• Polarity protection for the voltage supply
• Din-Rail mountable
• Equivalent to VT 3006 Rexroth
• DIN RAIL mountable
• No addition card holder required

SWA Order No : SWA-1107-A1-R0

Technical Data

• Electro Static Precipitator (ESP)controller board
• Used for condensation of the dust in power plants or from any chimney where the gas is allowed to go out.
• BAPCON control board

SWA Order No: SWA-1011-A1-R1

Technical Data:

• It Converts TTY signal to RS232 signal
• 15 Pin D Sub connection at PLC side
• 9 Pin D sub connection at PC side
• Requires RS232 port on PC as Com1 or Com2

SWA Order No: SWA-1087-A1-R0

Technical Data:

• Communication cable between OP7 and PC
• 15 Pin D Sub connection at PLC side
• 9 Pin D sub connection at PC side

SWA Order No : SWA-1038-A1-R1

Technical Data

• Based on Microcontroller MC9S12DP512
• Designed to have following communication ports
• 2 numbers of RS232 ports
• 4 numbers of CAN bus
• 8 number of Analog Inputs
• Digital data bus for interfacing to Digital input output, PWM modules, MOSFET modules, Resistance modules, LCD board & Power Supply board
• Facility for can short or can open is available.

SWA Order No : SWA-1042-A1-R0

Technical Data

• Consists of 5V , +/-15V and also Programmable TDK Lambda Dual power supplies
• Voltage Selectable through programming terminal

SWA Order No. :Triggering Thyristors: SWA-1005-A1-R2

Features:

• Pulse Transformer assembly for Triggering Thyristors used in DC drives e
• Specially suitable SIMDYNE C Drive BHEL / SIEMENS make
• Pulse transformer assembly equivalent to 6QN1010-4AD

SWA Order No : SWA-1041-A1-R0

Technical Data

• 8 Digital Output discreet board
• Output 0.02% accuracy

SWA Order No :Electronic control board for Bakery Oven system : SWA-1089-A1-R0Oven Controller keyboard : SWA-1090-A1-R0Logic embedded system : SWA-1071-A1-R0MAX 6675 Interface Card: SWA-1073-A1-R0

Features

• The major components used in oven are Blower motor, Burner, Turn table motor, Hood motor, Solenoid Valve
• The Burner is source of heat and runs on diesel or LPG. The burner is located in the Burner chamber.
• The Blower blows the hot air from burning chamber to the baking chamber of the oven.
• The baking chamber is the area where the job is loaded on a stand, which is mounted on a turn table.
• The turn table rotates at a constant pace, which exposes the job evenly to hot air and bakes the food.
• The solenoid valve controls the water inlet and used for steaming purpose during the baking process.
• The hood motor is located on top of the baking chamber and used to exhaust the excess steam from the baking chamber after the baking process, with the door closed.