RAYPA Fat Extractor

Reference SX-6 MP
H x W x D cm 59 x 68 x 31
Power W 1500
Weight kg 40

RAYPA fat extractor. Method Soxhlet and Randall. Fat extraction system using several solvents, as Randall method.

View Complete Details

Ask Latest Price & Details

RAYPA Fat Cold Extraction System

Reference EF-6
H x W x D cm 31 x 68 x 31
Weight kg 15

RAYPA cold fat extraction system, pre-treatment for F-6. Suitable for many extraction solvents. 6 simultaneous samples.

View Complete Details

Ask Latest Price & Details

RAYPA Fibre Extractor

Reference F-6
H x W x D cm 59 x 68 x 31
Power W 1500
Weight kg 35

RAYPA fibre extractor. Weende and Wijstrom method for raw fibre. Van Soest method for dietetic, acid detergent and neutral fibre.

View Complete Details

Ask Latest Price & Details

Fibre Extractors

H x W x D cm 59 x 68 x 31
Power W 1500
Weight kg 35

RAYPA fibre extractor. Weende and Wijstrom method for raw fibre. Van Soest method for dietetic, acid detergent and neutral fibre.

View Complete Details

Ask Latest Price & Details

Raypa Cod Quantification System

Power W 1500

Raypa chemical oxygen demand (cod) quantification system. Microprocessor with 9 programs having 18 temperature and incubation time steps.

View Complete Details

Ask Latest Price & Details

MicroCen M

Microprocessor controlledEspecially for microliter tubesMaximum capacity: 30 x 2.2 ml4 angle rotors, 1 swing-out rotor, 1 microhematocrit rotorSpeed: 500 - 16, 000 rpm, in steps of 100 rpmg-force (RCF): 20, 865 x g, in steps equivalent to 100 rpmTimer: up to 60 min, in 1 min increments, on request up to 999 min.HOLD for longer runs PULSE for short runs9 acceleration and deceleration rampsMaintenance free, brushless induction driveStainless steel chamber with additional inner guard ringOverspeed detection, imbalance detection and cut-offMotorized lid lock, automatic lid opening, emergency lid lock releaseLCD display for both current and preset values of speedg-force, time and temperature(temperature only in refrigerated model MicroCen MR)

View Complete Details

Ask Latest Price & Details

UniCen M

Microprocessor controlledFor centrifuge tubes and bottles, Microtiter plates, Tissue-culture tubes, Microliter tubes, etc.Maximum capacity: 4 x 200 ml12 angle rotors, 3 swing-out rotors, 1 microhematocrit rotorSpeed: 500 - 16, 000 rpm, in steps of 100 rpmg-force (RCF): 23, 755 x g, in steps equivalent to 100 rpmTimer: up to 60 min, in 1 min increments, on request up to 999 min.HOLD for longer runs PULSE for short runs9 acceleration and deceleration rampsMaintenance free, brushless induction driveStainless steel chamber with additional inner guard ringOverspeed detection, imbalance detection and cut-offMotorized lid lock, automatic lid opening, emergency lid lock releaseLCD display for both current and preset values of speedg-force, time and temperature(temperature only in refrigerated model UniCen MR)

View Complete Details

Ask Latest Price & Details

DNP-1500 RAYPA Distiller

Power W 2000
Weight kg 30
Water container LDepósito agua 10

RAYPA DNP-1500 nitrogen-protein distillers. Steam generator. Pump calibration by the user. 20 distillation programs

View Complete Details

Ask Latest Price & Details

RAYPA MBC Compact Digestion System

Programmable auto-start. Nine user free programs. All programs include up to 18 steps for temperature and incubation time

View Complete Details

Ask Latest Price & Details

HiCen FR

High-Speed Floor Centrifuge - refrigeratedMicroprocessor controlledCan be permanently installed or moved on rollersMaximum capacity: 4 x 500 ml12 angle rotors, 2 swing-out rotorsSpeed: 500 18, 000 rpm, in steps of 100 rpmg-force (RCF): 34, 774 x g, in steps of 10 x gTimer: up to 180 min, in 1 min incrementsHOLD for longer runs8 acceleration and deceleration rampsMaintenance free, brushless induction driveStainless steel chamber with additional inner guard ringOverspeed detection, imbalance detection and cut-offMotorized lid lock, automatic lid opening, emergency lid lock releaseLarge color display for both current and preset values of speedg-force, time and temperature

View Complete Details

Ask Latest Price & Details

MicroCen MR

Microprocessor controlledEspecially for microliter tubesMaximum capacity: 30 x 2.2 ml4 angle rotors, 1 swing-out rotor, 1 microhematocrit rotorSpeed: 500 - 18, 000 rpm, in steps of 100 rpmg-force (RCF): 26, 407 x g, in steps equivalent to 100 rpmTimer: up to 60 min, in 1 min increments, on request up to 999 min.HOLD for longer runs PULSE for short runs9 acceleration and deceleration rampsMaintenance free, brushless induction driveStainless steel chamber with additional inner guard ringOverspeed detection, imbalance detection and cut-offMotorized lid lock, automatic lid opening, emergency lid lock releaseLCD display for both current and preset values of speedg-force, time and temperature(temperature only in refrigerated model MicroCen MR)

View Complete Details

Ask Latest Price & Details

HiCen TR

High-Speed Tabletop Centrifuge - refrigeratedMicroprocessor controlledDespite its large volume will comfortably fit on the laboratory benchMaximum capacity: 4 x 500 ml12 angle rotors, 2 swing-out rotorsSpeed: 500 15, 000 rpm, in steps of 100 rpmg-force (RCF): 26, 790 x g, in steps of 10 x gTimer: up to 180 min, in 1 minHOLD for longer runs8 acceleration and deceleration rampsMaintenance free, brushless induction driveStainless steel chamber with additional inner guard ringOverspeed detection, imbalance detection and cut-offMotorized lid lock, automatic lid opening, emergency lid lock releaseLarge color display for both current and preset values of speedg-force, time and temperature

View Complete Details

Ask Latest Price & Details

Digital Fluorescence Imaging Analyzer

Feature Fully automated X-Y-Z stage Multi-channel fluorescence imaging Multi-well plates & vessles User-changeable objective lens

JuLI Stage is a fully-automated and digital fluorescence imaging analyzer that directly acquires cell image from various cell culture dishes in a cell-culture incubator. This also enables users to support the quantified cell confluence results with low variation and the growth curve using image based analysis for bright field.

View Complete Details

Ask Latest Price & Details

EVE Automated Cell Counters

features Fine distinction of clumped cel/ Cell size gating, Data storge & analysis/ No need to maintenance

The EVE uses state-of-the-art optics and image analysis to automate cell counting. It is a benchtop counter, designed to measure cell count and viability (live, dead, and total cells) accurately and precisely, using the standard trypan blue technique.

View Complete Details

Ask Latest Price & Details

IRiS Digital Cell Imaging System

The iRiS Digital Cell Imaging System is a multicolor fluorescence imaging system integrated with image analysis software and an onboard computer. With the iRiS Digital Cell Imaging System, you can obtain high resolution, publication-quality images without the complex steps necessary with a conventional fluorescence microscope. Bring your digital imaging to a new level with the iRiS Digital Cell Imaging System.iRiS, an Innovative Digital Cell Imaging System Thanks to advancements in optical technology, the quality of cell imaging data has increased dramatically since the conception of the microscope. User experience, however, has not improved at the same rate. Complex alignment processes, long setup procedures, and time consuming adjustments require extensive training and expertise to master. The iRiS Digital Imaging System pairs high performance optics, automation, and a user-friendly workflow to create a seamless user experience. High quality images can be captured consistently regardless of one's level of experience. With the iRiS Digital Imaging System, novices, experts, and everyone in between can easily obtain high quality crisp images in seconds.

View Complete Details

Ask Latest Price & Details

Thermalox

Features Carrier gas generation fitted as standard on TOC – no need for bottled gases, Automatically prepares its own calibrants – eliminates human error

The ThermaloxTMEnvironmental is equipped, as standard, with features many manufacturers treat as extras and you can measure solids The Thermalox instruments utilize our Model 8000 XYZ autosampler. This gives maximum flexibility and allows a high degree of automation. Calibrants can be made up automatically; sparging, dilutions and sample agitation can easily be carried out. The standard vial rack holds up to 88 glass or disposable plastic vials, with or without lids. It can be chilled and we are happy to provide racks to suit special requirements. By using a special aspiration step, samples containing particulate can be automatically agitated, ensuring that a representative sample aliquot is aspirated from the vial. Catalytic thermal oxidation. The only way to measure 'real' samples containing particulate or difficult to oxidise materialsStandard Deviation better than 20ppb on low level CarbonStandard Deviation better than 10ppb on low level NitrogenUpper Range Limit greater than 50, 000ppm for TOCDetection Limit of better than 40ppb for TOC and 10ppb for TNbAnalysis time less than two minutes per replicateComplete recovery, including Suspended Solid fractionHandles salts and particulate easilyHolds up to 88 samplesComplete washing between samples ensures no carry overTotally software driven from a Windows based platformAutomatic preparation of calibration standards

View Complete Details

Ask Latest Price & Details

Single-Use Laboratory Bioreactor

The EDF-5.4 monoblock can be adapted for single use bioreactor control. For example, we have expierence in application of single use vessels from CerCell (Danmark). CerCell has configurable vessels of different volumes (0.5 to75 liters). These vessels are equipped with all necessary accessories to provide fermentations of different microbial cultures. An important advantage of these vessels is the possibility to achieve high mixer rotation speeds. For example, 7.5 liter bioreactor, equipped with 3 ruchton turbines, can achieve mixer rotation speed up to 1500 rpm. In SUB it is possible to apply both single use and sterilizable pH and pO2 sensors.The application of SUB has following advantages: Decreases the risk of contamination;Eliminates the necessity to acquire and maintain the infrastructure for the processes (cleaning and sterilisation), which can be critical for validation;Simplifies and reduces validation costs;Reduces the costs of labor expenditures for the preparation operations (assembling - disassembling, cleaning and sterilization);The possibility to develop the fermentation processes according GMP requirements.

View Complete Details

Ask Latest Price & Details

Phoenix

Feature Long life Faraday cups that carry a 10 year guarantee of never having to be replaced., Fully networkable to permit remote control of the instrument

The Phoenix builds upon our strong heritage in TIMS design. It combines our proven 1:1 optics with state-of-the-art electronics and detector technology to produce data of the highest precision and stability. Our stainless steel collector is completely customisable to suit the needs of both our nuclear and geology customers with optional axial Ion counting Daly andor SEM that provides unparalleled sensitivity, linearity and Dynamic range.

View Complete Details

Ask Latest Price & Details

FTIR-7600 Fourier Transform Infrared Spectrometer

FTIR-7600 is a single-beam Fourier-transform infrared spectrometer with fast scan speed and high accuracy. This instrument is operated by a PC with user friendly software and a comprehensive manual. It is a valuable tool for various analytical applications in fields such as chemistry, medicine, food and beverage, wine industry, material engineering and quality process control. The optical system is highly stable owing to the dedicated design as follows: Highly stable optical bench with no need for adjustment or maintenance of optical pathPrecision machinery ensures high scanning repeatabilityCorner cube optics provides easy operation, removing complicated electronics and additional moving partsDynamic collimation system and movable mirror driving system keep the interferometer at optimum situationVoice-coil driver and precision slide ensure the performance of the system under severe conditionsA container of desiccant that protects the beam splitter and other optical components from moisture invasion

View Complete Details

Ask Latest Price & Details

Ashing Microwave

Feature Produces consistent ashing., Provides healthy work environment., Choice for crucible material.

Achieves fastest ashing time by combining effect of microwave and in-situ air flow. Has largest floor area to accommodate large quantity of sample to handles large quantities of polymers, oils, food, pulp, sludge, etc.

View Complete Details

Ask Latest Price & Details

Perfectblot Hybridization Oven

Capacity: 24 small (150 mm) or 12 large (300 mm) bottles
Temperature range up to 80 °C

Precise, flexible and robust! The PerfectBlot Hybridisation Oven provides the perfect conditions for consistent results in hybridisation experiments, including Northern, Southern, Dot or Slot Blots. The rotisserie fits 24 small (150 mm) or 12 large (300 mm) bottles.

View Complete Details

Ask Latest Price & Details

UV Sterilising PCR Workstation

The PCR Workstation Pro provides the ideal environment for biomolecular experiments sensitive to contamination: UV Air Recirculator module for elimination of aerosol contaminants during experimentsUV germicidal tubes eliminate nucleic acid contaminations between experiments The PCR Workstation Pro provides sufficient space and electrical connections to make a really useful and practical working area. 8 mm thick, ethanol resistant safety panels made of Makrolon effectively protect against UV irradiation.

View Complete Details

Ask Latest Price & Details

Freeze Drying Plant Sublimator 3x4x5

Temp. of shelf -40/<-55°C up to +60°C
Outer dimenstions: W 700 x H 1850 x D 800 mm

Two- chamber systemcompact floorstanding unitVisible condenserRectangular drying chamberVariable equipment for choiceAir- or water-cooler cooling systemGMP-FDA conform

View Complete Details

Ask Latest Price & Details

Laboratory Freeze Drying Unit

Outer dimensions : W 800 x H 650 x D 600 mm
Temp. of shelf -35°C/-60°C up to +60°C

Two chamber systemvials closing and maniford versionIdeal for Development of Process Engineering Research Small ProductionsCompact table top freeze dryerMicro-processing controlVisible condenserCooling and heatable shelves made of stainless steelMany variations for expansion

View Complete Details

Ask Latest Price & Details

Freeze Drying Plant Sublimator 4x5x6

Outer dimenstions: : W 1300 x H 1850 x D 1000 mm
Temp. of shelf -40°C/<-55°C up to +80°C

Two chamber systemCompact floorstanding unitRectangular drying chamberVariable equipment for choiseAir- or watercooled colling systemcGMP-FDA conform

View Complete Details

Ask Latest Price & Details

Pilot Scale Bioreactors

We offer stainless steel bioreactors from 20 to 15000 liters, as well as bioreactor lines, including other technological vessels. An autonomous bioreactor consists of 3 main parts: Bioreactor vessel;Technological stand;Control cabinet, including PLC. The connections between the bioreactor vessel and the technological stand are implemented with the help of flexible parallel wrapped stainless steel tubes. To ensure fully automated in-situ sterilization process, it is necessary to install pneumatically controlled membrane valves in the bottom, the inlet of a sparger and the lid of the vessel.The bioreactor vessel The fully equipped stainless steel bioreactor vessel (sterilizable in place) with upper or lower magnetic drive for agitation with 2 3 standard rushton turbines (pitched blade or marine mixer optionally). For all vessels H:D is in the range of 1:1.5 to 1:3. It can be specified in certain limiting sizes. For all vessels the maximal design pressure inside the vessels 3.0 bar, in jacket 3.5 bar. Maximal temperature 1400C. Inner vessel wall: surface roughness lower than 0.4m. Outer vessel wall: surface roughness 0.63 m (pickled & passivated). The material of the parts, contacting with product is stainless steel 316L. For parts, not contacting with product (for example, jacket), stainless steel 304. All bioreactors have insulation over the jacket. The outside surface of insulation is covered by stainless steel 304.

View Complete Details

Ask Latest Price & Details

PeqSTAR 96X Thermocyclers

Features Safety tested Production monitored Certified quality

The latest generation of the peqSTAR thermocycler family, packed with pioneering cycler engineering and available in a wide range of block formats (2 x 48, 96, 384 and in situ). The combination of high specification engineering and superior system control enables powerful, fast ramping, stable temperature control and a high level of system reliability. The 'touch screen' control, USB ports, LAN connection and the universal block for 0.2 ml and 0.5 ml tubes result in unique ease of use. The peqSTAR thermocyclers provides both best technical specifications and all so very simple of use, e.g. the FlexGradient Technology, emulation mode, 'peqSTAR Manager' PC software, etc. The Primus 25 advanced offers approved technology and highest precision for your daily laboratory work. With its small footprint the Primus 25 advanced is a reliable cycler for small sample numbers.

View Complete Details

Ask Latest Price & Details

Automated Hot Block Workstation

Vulcan is the first automated workstation combining the two essential steps of sample preparation -Digestion and Work-up. It is the only true automation accepting samples and returns prepared autosampler racks ready to be analysed.

View Complete Details

Ask Latest Price & Details

HiCen GT

Large High-Speed CentrifugeMicroprocessor controlledMaximum capacity: 4 x 1, 000 ml15 angle rotors, 4 swing-out rotors, 2 vertical rotorsSpeed: 500 14, 000 rpm, in steps of 100 rpmg-force (RCF): 21, 913 x g, in steps of 10 x gTimer: up to 180 min, in 1 min incrementsHOLD for longer runs8 acceleration and deceleration rampsMaintenance free, brushless induction driveStainless steel chamber with additional inner guard ringOverspeed detection, imbalance detection and cut-offMotorized lid lock, automatic lid opening, emergency lid lock releaseLarge color display for both current and preset values of speedg-force and time

View Complete Details

Ask Latest Price & Details

Micro-Volume Spectrometer

For microvolume concentration and purity measurements The versatile mySPEC range of spectrophotometers allows the user to perform measurements on nucleic acids and proteins contained in a very small sample volume. The 'mySPEC Twin' models have an additional port for a cuvette so that cell density or enzymatic activity measurements can be performed. Preconfigured modules allow for rapid, fully automated data analysis for a wide variety of applications including, concentration and purity of RNA and DNA; protein measurements (A280, Bradford, Lowry, BCA, Pierce 660); determination of labelling efficiencies; colorimetric assays on enzymatic activities and cell density measurements. Requires just 1 l sampleQuick and simple to use - no cuvettes required just pipette, measure (

View Complete Details

Ask Latest Price & Details

IRMS (Isotopic Ratio Mass Spectrometer)

Combining superior analytical performance with class leading reliability, the 20-22 ensures that all your scientific needs are met. Backed by over 20 years of development with a no compromise approach to its engineering integrity, Sercon provides the ultimate isotope ratio mass spectrometer. This technology is available in both continuous flow 20-22 and dual inlet GEO 20-22 forms to be interfaced with our range of automated preparation units and peripherals The 20-22 incorporates many high level design features. These include an all stainless steel and metal gasket construction flight tube for ultra-high vacuum purity to ensure minimal backgrounds and zero water contamination. True differential pumping for superior ion transfer through the flight tube from high sensitivity source to large dynamic range collectors. The benchtop design with Windows 7 based software ensures a user friendly interface for the most productive IRMS system available.

View Complete Details

Ask Latest Price & Details

ABCA2 Automated Breath CO2 Analyser

The ABCA2 is the high performance, high sample throughput isotope ratio mass spectrometer for breath analysis. The outstanding performance and versatility, combined with user friendly software, make the ABCA2 the only choice for 13C breath tests. Superior performance, high sample throughput and unlimited sample capacity ensure that this is the ultimate instrument for Helicobacter pylori detection. Other demonstrated 13C applications include: fat malabsorption, pancreatic function, lactose intolerance, bile acid circulation, gastric emptying, liver function and metabolic turnover rate measurements.

View Complete Details

Ask Latest Price & Details

ABCA2 Gas Autosampler

The gas autosampler has been chosen to be the most robust and reliable gas sampler in the marketplace. With over 17 000 similar units installed, you can be confident in its efficacy. Incorporating a bespoke multiple access rack system, with space for up to 240 samples, the sampler may be reloaded at any time. The sample number is limitless so potentially up to 480 samples can be analysed within a 24 hour period. Using the optional barcode reader, sample and patient codes can be read into the software as the analysis progresses. This sampler is available as an upgrade for all ABCA systems to ensure all users can benefit from its versatile performance.

View Complete Details

Ask Latest Price & Details

Primus 25 Advanced Thermocycler

Dimensions (W x D x H): 22 x 28 x 24 cm
Max. Ramping: 2°C/s
Temperature range block: 4°C - 105°C
Temperature range lid: 70°C - 120°C

The Primus 25 advanced is a compact personal cycler, with the highest flexibility. Its universal block can be loaded with up to 25 x 0.2 ml tubes or alternatively with up to 13 x 0.5 ml tubes with flat caps. Because of the special design of the heated-lid the height adjusts automatically to the different tube size. In the Primus 25 advanced highest flexibility is given at programming. For each program step the most suitable command can be selected from a list. Within generously selected areas. 'increment' and 'decrement' of time and temperature are adjustable, enabling even complex applications like the 'touch down' or 'Long Distance' PCR.

View Complete Details

Ask Latest Price & Details

Ecs 4010 Chnso Analyzer

Sampling options "Zero Blank" sampler, 32 or 50 positions 150 position open carousel sampler Direct injection (syringe) of gases
Dual filament TCD No reference gas required Pre-heating of combustion gases

It was designed as an advanced analytical platform for CHNSO elemental analysis and Nitrogen Protein determination. It is based on an automatic analytical unit whose operation - from sampling up to signal detection - is microprocessor controlled. It represents an evolution in the technique of elemental analysis by "flash combustionchromatographic separation and multi-detector techniques". Traditionally, automatic instruments for CHNSO elemental analysis have been divided into two groups; micro and macro elemental analysis. Samples for micro EA are easily analyzed by sophisticated automatic instruments using the technique of combustiongas chromatography. For the analysis of stable isotopes of CHNSO, a sampling system is required which does not contaminate the sample with atmospheric nitrogen and oxygen, especially working at very low levels. Advanced, highly stable catalysts are required to avoid any material exchange to the combusted gases. To increase throughput and minimize maintenance time and cost, a simple approach to the design of the analyzer is essential, especially for macro sample analysis where all combustion gases pass through the detector system without splitting or diluting.

View Complete Details

Ask Latest Price & Details

Platinum Model - Class II Type A2

ISO 14644-1, ISO Class 5 (Class 100) Standards Compliance, HEPA filter removes 99.99% of 0.3m ParticlesEasy to replace filter from the Front Panel with maintenance free design and structureLaminar Airflow and Uniform air velocity. Provide high clean filter air for high performanceBuilt-In Lamps and Utilities, UV and fluorescent lamp, air and gas cock, power consent are builted as standardAir Leak Proof Cabinet Structure with high clean stainless steel interior work station and epoxy powder coated steel exterior for long durabilityTempered Safety Glass Sliding Door for maintain high quality cleanliness andfor protection from UV exposureLow Noise Level and Vibration free 5660 dB high efficiency sirocco fan blower.Microprocessor Digital Controller with LCD back light displayAir Velocity Control & Alarm System, temperature monitor at working zone Specifications: Easy to replace Filter in front panelBuilt-in Mesh guard for Filter protectionRemovable Working Tray easy to Clean and disinfection for working zoneOne touch open front panel for easy maintenanceMaximum Door Opening Alarm to protect air flow performance and safetyUV Sterilization with onoff working timer

View Complete Details

Ask Latest Price & Details

Platinum Model - Class II Type B2

ISO 14644-1, ISO Class 5 (Class 100) Standards Compliance, HEPA filter removes 99.99% of 0.3m ParticlesEasy to replace filter from the Front Panel with maintenance free design and structureLaminar Airflow and Uniform air velocity. Provide high clean filter air for high performanceBuilt-In Lamps and Utilities, UV and fluorescent lamp, air and gas cock, power consent are builted as standardAir Leak Proof Cabinet Structure with high clean stainless steel interior work station and epoxy powder coated steel exterior for long durabilityTempered Safety Glass Sliding Door for maintain high quality cleanliness andfor protection from UV exposureLow Noise Level and Vibration free 5660 dB high efficiency sirocco fan blower.Microprocessor Digital Controller with LCD back light displayAir Velocity Control & Alarm System, temperature monitor at working zone Specifications: Easy to replace Filter in front panelBuilt-in Mesh guard for Filter protectionRemovable Working Tray easy to Clean and disinfection for working zoneOne touch open front panel for easy maintenanceMaximum Door Opening Alarm to protect air flow performance and safetyUV Sterilization with onoff working timer

View Complete Details

Ask Latest Price & Details

Laminar Flow Clean Bench Platinum Model

Excellent performance by unique designed structure and air flow system ISO 14644-1, ISO Class 5 (Class 100), Standards Compliance, HEPA filter removes 99.99% of 0.3m particlesEasy to replace filter from the back panel with maintenance free design and structureLaminar Air Flow and uniform air velocity provide high clean filter air for high performanceBuilt-In Lamps and Utilities, UV and fluorescent lamp, air and gas cock, Power consent are builted as standardOne piece cabinet structure no require separate stand, easy to move, free from the loadingAir Leak Proof Cabinet structure with high clean stainless steel interior work station and epoxy powder coated steel exterior for long durabilityTempered Safety Glass Sliding Door for maintain high quality cleanliness and for protection from UV exposureLow noise level and vibration free 5660 dB high efficiency sirocco fan blowerMicroprocessor Digital Controller With LCD back light display

View Complete Details

Ask Latest Price & Details

Live Cell Movie Analyzer

Benefits Capturing time-lapse images & making a movie. Automated quantitative cell confluence analysis

Increasing number of researchers are using live-cell imaging to study cellular functions. JuLITM Br, smart bright-cell movie analyzer, was developed to enable variety of biological experiments for live cell imaging.

View Complete Details

Ask Latest Price & Details

Laboratory Freeze Dryer VaCo 5

Dimensions of condense Ø 270 x 280 mm, Ø 270 x 280 mm
Volume 16 litres
Temperature of condenser -50°C, -80°C

Stainless steel manifold with 6 or 12 connectionsAcrylic chambers 300mmx400mm or 400mmx500mmInner racks shelves 270mm or 370mmVial stoppering systemVacuum regulation by magnetic valveVacuum pumps 5, 10mh and chemical resistant typeAmpoules adapter 16N2-liquid cooling with up to 150C

View Complete Details

Ask Latest Price & Details

Viscothermostats

LAUDA viscothermostats are the solution to thermostating all glass capillary viscometers. With their wide temperature range, the control heads of Proline and ECO meet the high requirements of viscosity measurement (ASTM D445, ISO 3105, and DIN 51562). High degree of transparency and homogeneous lighting guarantee good inspection of the measurement processes. Numerous advancement options (e.g. magnetic stirrer, additional cooler, temperature sensors, and software) optimize the range of applications possible. The new Viscocool and Viscotemp viscothermostats are sensible add-ons to the Proline PV and ECO ET. The Viscotemp models supplement the robust stainless steel thermostats with a very good price-performance ratio. The new Viscocool 6 is equipped with integrated Peltier cooling which enables thermostating at up to 15 C below room temperature in compliance with standards.Application examples: Standard-compliant thermostating of different models of glass capillary viscometersThermostating of automatic viscometers as all-around systemsManufacture of dilution series with magnetic stirrers

View Complete Details

Ask Latest Price & Details

Omnicool

LAUDA Omnicool - Peltier-controlled heating and cooling micro block thermostat from 4 up to 80 C with optional stirring for small sample volumes in research, teaching and quality control Peltier thermostating from 4 up to 80 C, optional stirring function for small sample volumes, extremely compact, easy to integrate With the Omnicool thermostats, LAUDA is forging ahead in new dimensions of coolant-free mini-thermostats. Being extremely compact, they stand for the swift, direct and highly dynamic thermostating of small sample volumes. Optimized for a sample volume of 100 ml, the Peltier thermostating cell enables electronic heating and cooling in minutes with the highest degree of control accuracy. With Omnicool 62 Plus even low and high viscosity fluids can be well mixed thanks to the integrated mini-magnetic stirring unit. This means that temperature homogeneity is guaranteed at all times. For highly precise, dynamic applications the temperature can be determined with an external sensor immersed in the sample. With the new Omnicool thermostats, LAUDA offers a new flexible thermostating option for versatile applications.Application examples: Test of temperature dependence of liquidsReaction kinetics with defined temperaturesThermostating samples for rotational viscometersExact measurement of conductivity and pH value without temperature compensationIn-situ thermostating of bitumen for penetrometer

View Complete Details

Ask Latest Price & Details

Laboratory Freeze Dryer

VaCo 2 with acryl chamber and inert racks with drying shells and 6 connections on the top Stainless steel manifold with 6 or 12 connectionsAcryl chambers 200mmx300mm or 300mmx400mmInner racks shelves 175mm or 270mmVacuum regulation by magnetic valveVacuum pumps 5, 10mh and chemical resistant typeAmpoules adapter 16N2-liquid cooling with up to 150C

View Complete Details

Ask Latest Price & Details

Laboratory Freeze Dryer

Dimensions of condenser Ø 400 x 400 mm
Volume 50 litres
Ice capacity 10kg/24h
Max. ice capacity 12 kg

Stainless steel manifold with 6 or 12 connectionsAcrylic chambers 300mmx400mm or 400mmx500mmInner racks shelves 270mm or 370mmVial stoppering systemVacuum regulation by magnetic valveVacuum pumps 10, 20, 30mh and chemical resistant typeAmpoules adapter 16N2-liquid cooling with up to 150C

View Complete Details

Ask Latest Price & Details

LC 1650 Autosampler

The LC1650 Automated Chromatography Sample Introduction System (ACSIS) is a high performance autosampler with extended sample throughput and fast robotic capability. It features some of the most advanced developments in liquid sample handling design for exceptional injection performance and operational reliability. A sapphire plunger self priming syringe in conjunction with a flow-through needle path eliminates dead volume ensuring excellent precision and linearity resulting in accurate and reliable assay results. An unprecedented sample capacity of 160 standard (2 or 4 mL) vials is accessed by a x, y, z, robotic sample probe to perform sample dilution, internal standard addition, solvent extraction and pre-column derivatization with high precision as integral parts of the LC1650's sample processing routines. A small footprint (34 cm of bench space) and an open view front access design facilitates fast sample loading and easy serviceability. The LC1650's advanced processing capabilities can be utilised as a stand-alone module through built-in keypad and backlit LCD display, or integrated into a complete HPLC system with single computer control. Built-in processing templates can be used for unattended batch analysis and pre-column sample preparation. A priority function enables urgent samples to interrupt batch mode analysis. The modular stand-alone format allows easy integration into any existing HPLC system, or combined with other GBC modules to provide a complete HPLC system with single computer control.

View Complete Details

Ask Latest Price & Details

Fluorescence Live Cell Movie Analyzer

Feature Time-lapse image capturing and movie making, Cell counting and viability, GFP or RFP expression level checking

With the states-of-the art optics, JuLITM FL enables users to perform the image capturing and the time-lapse movie making. It also can support cell counting and measuring the level of fluorescence expression.

View Complete Details

Ask Latest Price & Details

RM 100 Touch Gel Timer

DIMENSIONS AND WEIGHT: Head: L180 x W135 x H250 mm | Stand for GEL TIMER: L280 x W200 x H630 mm | Weight: 15 kg
CARRY CASE Optional for measuring head only
PRINTER CONNECTION: : USB Host Port

RM 100 TOUCH GEL TIMER Viscometer Gel timer Determine the gel times of your resins and scalable products The RM 100 TOUCH GEL TIMER is ideal for monitoring viscosity changes in your products up to a solid state.Specifications: TYPE OF INSTRUMENT: Rotating viscometer gel timerSPEED RANGE: Unlimited number of speeds between 0.3 and 1500 rpmTORQUE RANGE: From 0.05 to 40 mNmTEMPERATURE: The RM 100 TOUCH GEL TIMER has a PT100 sensor which indicates temperatures between -50 C to + 300 C.ACCURACY: +- 1 % of the full scaleREPEATABILITY: +- 0, 2 %VISCOSITY RANGE: 100 - 5, 000, 000, 000 mPas depending on the speed used.DISPLAY: 7" Touch screenDISPLAY SETTINGS: Viscosity Speed Torque Temperature Time Measuring geometry Level of sensitivity Date hour Choice of viscosity units: cP or mPas Language: FrenchEnglishSECURITY AND CONFIDENTIALITY: An "operator" function allows you to enter a username for your instrument. This user must then be identified using a 4-digit code. There is also a protected mode that locks your measurement conditions.

View Complete Details

Ask Latest Price & Details

SVI Analytica Private Limited Udyog Vihar Phase V, Gurugram, Haryana

Our Products

RAYPA Fat Extractor

RAYPA Fat Cold Extraction System

RAYPA Fibre Extractor

Fibre Extractors

Raypa Cod Quantification System

MicroCen M

UniCen M

DNP-1500 RAYPA Distiller

RAYPA MBC Compact Digestion System

HiCen FR

MicroCen MR

HiCen TR

Digital Fluorescence Imaging Analyzer

EVE Automated Cell Counters

IRiS Digital Cell Imaging System

Thermalox

Single-Use Laboratory Bioreactor

Phoenix

FTIR-7600 Fourier Transform Infrared Spectrometer

Ashing Microwave

Perfectblot Hybridization Oven

UV Sterilising PCR Workstation

Freeze Drying Plant Sublimator 3x4x5

Laboratory Freeze Drying Unit

Freeze Drying Plant Sublimator 4x5x6

Pilot Scale Bioreactors

PeqSTAR 96X Thermocyclers

Automated Hot Block Workstation

HiCen GT

Micro-Volume Spectrometer

IRMS (Isotopic Ratio Mass Spectrometer)

ABCA2 Automated Breath CO2 Analyser

ABCA2 Gas Autosampler

Primus 25 Advanced Thermocycler

Ecs 4010 Chnso Analyzer

Platinum Model - Class II Type A2

Platinum Model - Class II Type B2

Laminar Flow Clean Bench Platinum Model

Live Cell Movie Analyzer

Laboratory Freeze Dryer VaCo 5

Viscothermostats

Omnicool

Laboratory Freeze Dryer

Laboratory Freeze Dryer

LC 1650 Autosampler

Fluorescence Live Cell Movie Analyzer

RM 100 Touch Gel Timer

Contact Us

SVI Analytica Private Limited
Udyog Vihar Phase V, Gurugram, Haryana