Suzhou ZhuoZhao Dispensing Technology

Urapakkam, Chennai, Tamil Nadu

Two-component automatic rubber supply system: equipped with compensation rubber supply function, in the proportion of the alarm, to prevent the damage of the valve body.

In the process of glue supply, test the proportion of glue supply, so that the two components of glue at the end of the end of the glue, to reduce the waste of glue.

• 490ml, two-component glue is applicable
• Comp for the error of glue supply system and valve body
• Scale proportion alarm to prevent valve body damage
• In the production process of production to prevent the proportion of imbalance caused by adverse production
• So that the glue can be fully utilized, greatly reduce the waste

• Automatic/time dispensing mode In automatic mode controller dispensing duration depends on external signal control. In dispensing mode, dispensing time is controlled by the time set on the controller (range 0.01-999.99s).
• Barometric stabilization unit An independent pressure regulator is added inside the controller to minimize the influence of external air pressure on the dispensing pressure
• Automatic compensation for liquid level difference It is equipped with a high precision pressure sensor to detect the pressure in the rubber bucket, and compensates the dispensing time according to the time when the pressure is filled in the rubber bucket at a high frequency. When the glue level becomes low, the time when the pressure is filled in the rubber bucket becomes longer, and the controller automatically compensates accordingly.

• Automatic surplus warning When the liquid level in the rubber bucket is very low, the time required for compressed air to fill the rubber bucket will be longer. When the time is greater than the set value, the controller automatically determines theinsufficient glue allowance.

Large flow water circulation cooling, the lowest refrigeration temperature can reach -20.

The traditional gas refrigeration AB glue needs to be drained once every 15s, and the electronic refrigeration method is drained once every 45 seconds.

Electronic refrigeration only needs power supply, saving air source. The thermostat can dynamically adjust the temperature according to the set temperature.

The fan size is 12025 and adopts ultra-quiet design.