Our Products
Switchboards
2 Products availableLED, LCD, Smart TV & Home Theatre
2 Products availableElectric Fans
1 Products availableRefrigerator
1 Products availableLaboratory Apparatus
1 Products availableDisplay Accessories
1 Products availableAdaptors, Plugs And Sockets
1 Products availableHorticulture & Gardening Tools
1 Products availableElectric Circuit Components & Parts
1 Products availableTags
1 Products availableOur offered Product range includes AMR Gas Metering Units, ZIO Single Relay Unit, Smart Plug, Water AMR and Control Wireless Coordinator.
Tarang module Based Pulse metering units mountable to any Gas meter for metering. The Most Economical Solution to enable the Wireless metering in to the Suvana RF GAS AMR is a wireless module which is specially designed for applications where the Pulse output of various metering devices need to be incorporated into a wireless network for creating the cost effective AMR solution. The Output of the GAS meter is directly connected to RF GAS AMR unit with enclosure of IP-65 unit. The running Pulse count will be stored in the local memory, the local total count will be transmitted in the Wireless Network at preset time interval to the Coordinator through Star/point-point network. An open, bi-directional & extensible infrastructure that uses low-cost devices to send the data from Gas meters. Secure, store, forward, acknowledge mechanism ensures high data reliability, easy to install, capable of handling expanding network of meters with minimal latency virtually maintenance free
DCU creates the necessary network infrastructure by linking several Gas/water metering units to the central utility server. It receives the data from the group MUIs in the network and transfers all data to the configured Remote Data Server through GPRS Link. The data concentrator also synchronizes time and date of metering units to the central utility server and enables secure data transfer of user authentication. One DCU will be required for each Network Group, which can have up to 1024 metering units. DCU is an intelligent device with built-in 865MHz RF Tarang UT-20 module to acquire data from Gas Metering units with built-in GPRS to transmit data to the Data Acquisition Server Interfaced with Data Logger PC.
End Device Controllers (EDC) in the home automation RF network is the direct interface to the individual home appliances which needs to be controlled (Lights, Fan, Air Conditioner, Geyser, TV, etc., etc). These devices has the capability to perform on/off. A standard single End Device Controller can be placed in a Ceiling rose or a electrical wall junction boxes inside the wall or Ceiling.
In Home Display is the heart of an integrated home automation network. Gateway acts as a bridge between home automation RF network and local Wi-Fi network thus enabling bi-directional communication between end control nodes /sensor nodes and Smart Phones / Tablet / Cloud.
Wireless Switch Board is Zigbee based smart device which can be easily installed in to your Existing 4module or higher size Switch board. You can connect the Existing Switches to this unit and you are ready to add the device to your IHD Gateway to control through an Android App wirelessly and also through local Switches and Dimmers. Simple Dimming control through the dimmer unit, which can be fitted in to Existing dimmer. This unit is pre configured with unique RF ID number for remote control. Switch board Phase lines are connected through the relay contacts of this module. Supply to the connected loads will be controlled through these relay contacts. These relays are operated in wireless through our IHD Gateway External manual switch operation will change the state of ON/Off. This change of state will be automatically updated in the Android App.
This is a small RF based unit, which can be fitted in existing switched board. Standard unit comes with following combinations:
4 ON/OFF Controls + 2 Dimming controls
5 ON/OFF Controls + 1 Dimming control
6 ON/OFF Controls
Smart Plugs are the RF network elements which has an important role in a home automation network to track the energy consumption of the power hungry home appliances. Tracking helps in deciding on the servicing / replacing of the appliance at appropriate time and analyzing overall power budget of the home. A configuration set in the Gateway can automatically power of the Smart Plug if the energy consumption goes above the threshold.
RF Remote is part of HAS Devices RF network elements which has an important role in a home automation network to control the HAS Device end points. With this will be able to configure and control 8 Zones and 4 end points in each zone. Standard AAA Size battery based sleek and Handy Design.
Smart Plugs are the RF network elements which has an important role in a home automation network to track the energy consumption of the power hungry home appliances. Tracking helps in deciding on the servicing / replacing of the appliance at appropriate time and analyzing overall power budget of the home. A configuration set in the Gateway can automatically power of the Smart Plug if the energy consumption goes above the threshold.
Auto meter reading equipment is used to collect data remotely from Gas/Water/Electricity/ Meters or any similar meters. The application can be in Apartments, residential buildings, villas in a community, where the meter billing is centralized. This is to minimize human intervention. Every time a person need not have to go for recording the meter reading. All the readings of different meters can be collected through wireless or through RTU MODBUS and monitored from a central unit.Our standard module WAP-+912 accepts data from six meters and the running count of the pulses is stored in non-volatile memory.
It is a data acquisition module specially designed for applications where the pulse/analog output of various metering devices will be put on RS 485 bus for further processing. The WAP-+912 is also available with optional built in SMPS and battery for those applications where the AMR must continue operating even during power failure condition or for full wireless solutions.
Compact asset tracking sensors for assorted tracking requirements. Available in FSK or LoRa technology wireless modulation schemes. Optional movement detection and sensor interface. Ideal for enterprise asset management, warehouse management, people or mining equipment tracking.
Capacitive touch screen switch boards are the elegant switch board panels attached with an End Device Controller enables the control of home appliances via panel touch or wireless commands. Panel images are customizable and chosen based on the user request, thus not altering the aesthetics of the home interiors. We have multiple Variants for touch panels. Capacitive Touch Switch boards are available to fit-in your 2-Module, 4-module & 6-Module switch board boxes. These come in following combinations:1. 2-Module Switch Box unit with 4Load control for ON/OFF.2. 4-Module Switch Box unit with 5Load control 4 for ON/OFF and 1 for Level control (Dimmer).3. 6-Module Switch Box unit with 9Load control 8 for ON/OFF and 1 for Level control (Dimmer).
FEATURES