Jigs, Casting Dies, Die Casting Moulds & Moulding Tools #4033203
Polychloroprene Rubber (Neoprene Rubber) Moulding With Aluminium Insert For A G S (Bersimis)
-
Shore – A- Hardness (IRHD)
-
Tensile Strength,
MPA
Elongation at Break, %
-
Change after ageing at 70ºC for 168hrs.
Shore – A- Hardness (IRHD)
-
Tensile Strength,
%
Elongation at Break, %
-
Requirements
As per BS: 2752/82/Gr.
C - 70
70 + 5 / -4
-
13 (Min.)
200 (Min.)
-
(+) 7 (Max.)
(-) 12 (Max.)
Features
- They are widely used as spacer insert in suspension fitting of power transmission line hardware.
- Reduces static and dynamic stresses at the conductor support.
- Protects the conductor against wind induced motion.
View Complete Details
Polychloroprene Rubber (Neoprene Rubber) Moulding Aluminium Insert Fo R A G S Panther
-
Shore – A- Hardness (IRHD)
-
Tensile Strength,
MPA
Elongation at Break, %
-
Change after ageing at 70ºC for 168hrs.
Shore – A- Hardness (IRHD)
-
Tensile Strength,
%
Elongation at Break, %
-
Requirements
As per BS: 2752/82/Gr.
C - 70
70 + 5 / -4
-
13 (Min.)
200 (Min.)
-
(+) 7 (Max.)
(-) 12 (Max.)
Features
- They are widely used as spacer insert in suspension fitting of power transmission line hardware.
- Reduces static and dynamic stresses at the conductor support.
- Protects the conductor against wind induced motion.
View Complete Details
Polychloroprene Rubber (Neoprene Rubber) Moulding On Bundle Spacer Inserts
-
Shore – A- Hardness (IRHD)
-
Tensile Strength,
MPA
Elongation at Break, %
-
Change after ageing at 70ºC for 168hrs.
Shore – A- Hardness (IRHD)
-
Tensile Strength,
%
Elongation at Break, %
-
Requirements
As per BS: 2752/82/Gr.
C - 70
70 + 5 / -4
-
13 (Min.)
200 (Min.)
-
(+) 7 (Max.)
(-) 12 (Max.)
Polychloroprene Rubber (Neoprene Rubber) Moulding on Bundle Spacer Inserts
Features
- It maintains bundle conductor at their design specification.
- It protects bundled conductor from short circuit, ice droplets and wind motion in the transmission line.
View Complete Details
Rubber Moulded Aluminium Insert
-
Shore – A- Hardness (IRHD)
-
Tensile Strength,
MPa
Elongation at break, %
-
Change after ageing at 70ºC for 168hrs.
Shore – A- Hardness (IRHD)
-
Tensile Strength,
%
Elongation at break, %
-
Requirements
As per BS: 2752/82/Gr.
C - 70
70 + 5 / -4
-
13 (Min.)
200 (Min.)
-
(+) 7 (Max.)
(-) 12 (Max.)
Polychloroprene Rubber (Neoprene Rubber) Moulding with Aluminium Insert for A G S (Zebra)
Features
- They are widely used as spacer insert in suspension fitting of power transmission line hardware.
- Protects the conductor against wind induced motion.
- Reduces static and dynamic stresses at the conductor support.
- This allows the conductor to better withstand the effects of aeolian vibration and wind-induced oscillation.
View Complete Details