• Brand NameSus Polymers Pvt Limited
• Rubber/Neoprene Moulded insert4 U.S.D
• Model NumberBS-2752
• Supply Ability100000 Unit/Units per Week
• Lead Time30 days

•  Shore – A- Hardness (IRHD)
• Tensile Strength, MPAElongation at Break, %
• Change after ageing at 70ºC for 168hrs.Shore – A- Hardness (IRHD)
• Tensile Strength, %Elongation at Break, %
• Requirements As per BS: 2752/82/Gr. C - 7070 + 5  / -4
• 13 (Min.)200 (Min.)
• (+)  7 (Max.)(-) 12 (Max.)

•  Shore – A- Hardness (IRHD)
• Tensile Strength, MPAElongation at Break, %
• Change after ageing at 70ºC for 168hrs.Shore – A- Hardness (IRHD)
• Tensile Strength, %Elongation at Break, %
• Requirements As per BS: 2752/82/Gr. C - 7070 + 5  / -4
• 13 (Min.)200 (Min.)
• (+)  7 (Max.)(-) 12 (Max.)

•  Shore – A- Hardness (IRHD)
• Tensile Strength, MPAElongation at Break, %
• Change after ageing at 70ºC for 168hrs.Shore – A- Hardness (IRHD)
• Tensile Strength, %Elongation at Break, %
• Requirements As per BS: 2752/82/Gr. C - 7070 + 5  / -4
• 13 (Min.)200 (Min.)
• (+)  7 (Max.)(-) 12 (Max.)

•  Shore – A- Hardness (IRHD)
• Tensile Strength, MPAElongation at Break, %
• Change after ageing at 70ºC for 168hrs.Shore – A- Hardness (IRHD)
• Tensile Strength, %Elongation at Break, %
• Requirements As per BS: 2752/82/Gr. C - 7070 + 5  / -4
• 13 (Min.)200 (Min.)
• (+)  7 (Max.)(-) 12 (Max.)

Features Resistant to ageing. They are usually helpful for vibration controller.

• Brand NameSus Polymers Pvt Limited
• Rubber/Neoprene Moulded insert4 U.S.D
• Model NumberBS-2752
• Supply Ability100000 Unit/Units per Week
• Lead Time30 days

•  Shore – A- Hardness (IRHD)
• Tensile Strength, MPAElongation at Break, %
• Change after ageing at 70ºC for 168hrs.Shore – A- Hardness (IRHD)
• Tensile Strength, %Elongation at Break, %
• Requirements As per BS: 2752/82/Gr. C - 7070 + 5  / -4
• 13 (Min.)200 (Min.)
• (+)  7 (Max.)(-) 12 (Max.)

•  Shore – A- Hardness (IRHD)
• Tensile Strength, MPAElongation at Break, %
• Change after ageing at 70ºC for 168hrs.Shore – A- Hardness (IRHD)
• Tensile Strength, %Elongation at Break, %
• Requirements As per BS: 2752/82/Gr. C - 7070 + 5  / -4
• 13 (Min.)200 (Min.)
• (+)  7 (Max.)(-) 12 (Max.)

•  Shore – A- Hardness (IRHD)
• Tensile Strength, MPAElongation at Break, %
• Change after ageing at 70ºC for 168hrs.Shore – A- Hardness (IRHD)
• Tensile Strength, %Elongation at Break, %
• Requirements As per BS: 2752/82/Gr. C - 7070 + 5  / -4
• 13 (Min.)200 (Min.)
• (+)  7 (Max.)(-) 12 (Max.)

•  Shore – A- Hardness (IRHD)
• Tensile Strength, MPAElongation at Break, %
• Change after ageing at 70ºC for 168hrs.Shore – A- Hardness (IRHD)
• Tensile Strength, %Elongation at Break, %
• Requirements As per BS: 2752/82/Gr. C - 7070 + 5  / -4
• 13 (Min.)200 (Min.)
• (+)  7 (Max.)(-) 12 (Max.)

Features Resistant to ageing. They are usually helpful for vibration controller.