Our Products
Tensile Testing Machine
1 Products availableIndustrial Ovens & Furnaces
1 Products availableInduction Cooktops, Gas Stoves & Burners
1 Products availableMeasuring Instruments & Equipment
1 Products availableCosmetics, Hair Care & Beauty Products
1 Products availablePlastic Testing Equipment
1 Products availableIndustrial Ovens
1 Products availableWe offer a complete product range of Zero Degree Chamber
We bring forth a wide variety ofLaboratory Hot Plateswhich are available in a host of working sizes. We use the finest grade steel which endows with excellent rust resistance to our Automatic Hot Plates. The outer body made of mild steel is coupled with fine powder coat finish to ensure the high quality. The Hot Plates which we manufacture can hold temperature up to 300 degrees. Our Hot Plates are fitted with electrically operated energy regulator and a 3 Heat Switch Control with corresponding indicators.
Table Top Two Tier Model
--> Metal casting Plate
--> Outer body made of mild steel with powder coat finish
--> Electrically operated Energy Regulator &
-> Heat Switch Control with corresponding indicators
--> Nichrome / Kanthal made long lasting heating elements
--> Cera wool insulation-->Surface Temp. Up to 300 degrees Celsius
"Surya" baths are unquely designed to heat faster with low energy cost and to maintain the temperature for longer time. To maintain the temperature for longer time. To maintain the temperature into the bath circulation is done by either one or two pumps as depending on the volume of bath.
Hot and cold water baths are used for long & short term Hydrostatic Pressure test of pipes. These baths are nade as per international standards to provide the heating & cooling media to the product.
Temperature is controlled by microprocessor based controllers. In large size bath :"Surya"gives separate bath for heating & the hot water is circulated to the other chamber so as to save the energy cost.
MODEL NO. |
SWB-H1 |
SWB-H2 |
SWB-H3 |
SWBE-H4 |
SWB-C1 |
SWB-C2 |
SWB-C3 |
SWB-HC1 |
SWB-HC2 |
SWB-HC3 |
SWB-O1 |
SWB-O2 |
MODEL NAME |
HOT WATER BATH |
HOT WATER BATH |
HOT WATER BATH |
HOT WATER BATH |
COLD WATER BATH |
COLD WATER BATH |
COLD WATER BATH |
HOT & COLD WATER BATH |
HOT & COLD WATER BATH |
HOT & COLD WATER BATH |
HOT OIL BATH |
HOT OIL BATH |
SIZE |
18"X18"X18" |
48"X36"X18" |
72"X48"48" |
48"X18"X18" |
18"X18"X18" |
48"X36"X18" |
72"X48"48" |
18"X18"X18" |
48"X36"X18" |
72"X48"48" |
19"X15"X24" |
32"X28"X22" |
Temp. Controller |
Digital PID controller with range upto 0 to 100ËšC (as per requirement) and accuracy of +/- 0.1 Deg.C. |
Digital PID controller with range upto -50°C to 100ËšC (as per requirement) and accuracy of +/- 0.1 Deg.C. |
Digital PID controller with range upto-50°C to 100ËšC (as per requirement) and accuracy of +/- 0.1 Deg.C. |
Digital PID Controller with range upto 200ËšC and accuracy of 0.1 Deg.C |
||||||||
Water Circulation through |
Reputed Company make tulluPump |
Reputed Company make tulluPump |
Reputed Company make tulluPump |
Oil Circulation through |
||||||||
Refrigeration |
N.A. |
Kirloskar Make Compressor |
Through Kirloskar Make Compressor |
Remi Motor |
||||||||
Heating |
Stainless Steel water heater as per heating capacity |
Stainless Steel water heater as per heating capacity |
Stainless Steel water heater as per heating capacity |
Stainless Steel water heater as per heating capacity |
||||||||
Insulation |
Glasswool Insulation |
Puff Insulation |
Puff Insulation |
Glasswool Insulation |
||||||||
Material of construction |
Inner Stainless Steel body & Outer Mild steel body |
Inner Stainless Steel body & Outer Mild steel body |
Inner Stainless Steel body & Outer Mild steel body |
Inner Stainless Steel body & Outer Mild steel body |
||||||||
Paint |
Powedr Coating through Seven Tank Process |
|||||||||||
Power Supply |
230V AC,440 V AC,50 Hz As per Heating & Cooling Capacity in Standard Requirement |
|||||||||||
Scope of Supply |
Machine with above specifications excluding oil |
Model No |
SMUF-I |
SMUF-II |
Size |
4" X 4" X 9" |
6" X 6" X 12" |
Temperature Controller |
Digital PID Controller with Resolution of 1ËšC & Accuracy of 1ËšC |
|
Temperature Range |
Ambient to 1000ËšC |
|
Heating Load |
2 KW |
|
Material Construction |
Mild Steel body |
|
Accessories |
Related Glassware |
|
Paint |
Powder Coating |
|
Power Supply |
230 V AC / 50Hz |
"Surya" Melt Flow Index Tester is designed for measuring "Melt Flow Rate' with high accuracy and being used for quality control test on flow ability, grading of thermoplastic materials according to flow. It is designed to calculate accurate rate of extrusion of molten resin through an orifice of specified temperature and pressure. Standard equipment includes all operating tools, piston and dies, Integrated microprocessor based PID temperature controller for a temperature range of 0-350 Deg.C with time facilities, Resolution as 999.9 sec.
Model No. |
SMFIM-I |
SMFIC-I |
Temperature Range |
0-350 Deg.C. |
0-350 Deg.C |
Micro Controller |
Specially designed Micro controller |
LCD based Micro controller for temperature and time with RS 232 Port |
Resolution |
0-999.9 sec |
0-999.9 sec |
Load Measurement |
N.A. |
Through L.C.D. based instrument with Least count of 10 mg. |
Sample Cutting |
Manual |
Auto |
WEIGHTS by Ads"" /> |
Standard 2.16 Kg. & 5 Kg. ( |
Standard 2.16 Kg. & 5 Kg. (other load as per requirement) |
Interface |
N.A. |
RS232 window based software |
Method of Test |
A |
A |
Accessories |
Piston, Orifice, Material Changer, Ejector, Orifice Cleaner, and Knife |
|
Paint |
MS body with powder coating & |
MS body with powder coating & Hard chrome |
Power Supply |
230V AC / 50 Hz |
230V AC / 50 Hz |
Standards |
ASTM D 1238 Method A & B, ISO 1133, IS 2508/2530 |
|
Software Features |
|
Density Determination Kit is available in 2 types one to be mounted on the pan and the other
type is with attachment for weigh below the balance. Density Determination Kit consists
density weighing pan assembly, stainless steel base for beaker, glass beaker, optional sinker
for testing materials having density less than water and software (program) for
density determination.
* Facility for programming density of liquid (other than water) and temperature of water.
* Incase of multiple samples, storage of all the sample weights in air first and then in water,
viewing of density of individual samples one by one on the display.
* Determination of density of liquid samples (Optional).
* Determination of air release value for oil samples (Optional).
Range :
0.1 mg - 200g
1mg - 1000g
The Surya Zero Degree Chamber is Specially used to Condition the specimen for different test at 0C or low temperature as specified in different national and International Standards.
Model |
SZDC-I |
SZDC-II |
Temperature Range |
0ËšC to Ambient |
-10ËšC to Ambient |
Controller |
Microprocessor Control |
Microprocessor Control |
Model |
Vertical / Horizontal |
Vertical / Horizontal |
Size |
18”X18”X18” |
18”X18”X18” |
Cooling |
Through Kirlosker make Compressor |
|
Paint |
Powder Coating |
|
Power Supply |
230V AC,50Hz |
|
|
Effect of heat is very essential on all kind of odd plastic material. Air oven is used as conditioning chamber as well as to check the effect of heat on plastic product.
MODEL NO. |
SHAO-1 |
SHAO-2 |
SHAO-3 |
MODEL NAME |
HOT AIR OVEN |
HOT AIR OVEN |
HOT AIR OVEN |
INNER SIZE |
12"X12"X12"(OR As per Requirement) |
18"X18"X18" (OR As per Requirement) |
24"X24"X24" (OR As per Requirement) |
Temp. Controller |
Digital PID controller with range upto 250 Dg.c. and accuracy of +/-0.5ËšC |
||
Air Circulation |
Circulating Fan |
||
Tray |
2 Nos. (Or as per Size Requirment) |
||
Heating Load |
1.5 KW (or as per Temperature requirement) |
||
Material of construction |
Inner Stainless Steel body & Outer Mild Steel Body with 50 mm Insulation |
||
Paint |
Powder coated |
||
Power Supply |
230 V AC / 50Hz |
Tensile test is a measurement of ability of material to withstand forces that tends to pull it apart and to determine to what extent the materials stretches before breaking
Tensile is the universal test applied to many polymers to check the mechanical properties and it is the most improtant property as majority of end use application involved some degree of mechanical loading & properties like Tensile Modulus, Elongation, Compression etc. are calculated using this machine.
MODEL NO. |
SUTM-I |
SUTM-I |
SUTM-I |
SUTM-I |
SUTMPPS-I |
SUTMPPS-I |
SDTLT-I |
STLT-I |
MODEL NAME |
Digital Single Screw |
Computerised Single |
Digital Twin Screw |
Computerised Twin |
Digital |
Computerised UTM With |
Digital Top Load Tester |
Computerised Top Load |
CAPACITY |
UP TO |
UP TO |
UP TO |
UP TO |
UP TO |
UP TO |
UP TO 0-150KG |
UP TO |
THE UTM CAN BE DESIGNED & SUPPLIED ACCORDING TO INDIVIDUAL LOAD RQUIREMENT |
||||||||
EXTENSION |
0-1000 MM OR AS PER REQUIREMENT |
|||||||
ATTACHMENT |
Compression/flExural/COF/ICOF/Peel/Bond/Tear/Shear/Puncture/Burst can be provided in all above models as per individual requirement |
|||||||
LOAD INPUT |
Maximum 2 Load Cell facility can be provided |
|||||||
SPEED |
1 TO 500 MM / MIN (AS PER STANDARD REQUIREMENT) |
|||||||
RESOLUTION |
00000 KG/000.00/0000.01 OR 0000KG / 000.0 KG / 00.00 KG |
|||||||
EXTENSION |
000.0 MM /000.00MM |
|||||||
EXTENSIO METER |
Contact Type as per requirment |
|||||||
A.C. DRIVE |
Suitable for UTM Capacity |
|||||||
POWER SUPPLY |
230 V AC, 50 HZ, SINGLE PHASE |
440 V AC, 50 HZ, THREE PHASE |
||||||
PAINT |
POWDER COATING & HARD CHROME PLATING |
|||||||
MODEL |
FLOOR STATNDING / TABLE TOP (AS PER CAPACITY OF MACHINE) |
|||||||
PRECAUTION/ |
ELECTRICAL EMERGENCY SWITCH, ELECTRO MECHANICAL LIMIT SWITCH, ELCTRONIC THROUGH MICRO CONTROLLER PARAMETERS |
|||||||
SOFT WARE |
RS 232 interface with WINDOW based software to conduct test and keep record of data with graph for the test calculated results of Yeild Load,Yeild Extension, Break Load, Break Extension, and Modulus of Elasticity, Maximum Load, Maximum extension, and Tensile Strength. |
|||||||
|