Harnessing our knowledge and understanding, we aim to clinch the top status in the industry. We, as a Supplier and Exporter of Stainless Steel Pipes, put a huge emphasis on maintenance of our quality. Hence, we forge relationships with only those vendors who are able to deliver nothing but finest quality. Stainless Steel Pipes are corrosion resistant thanks to the added chromium to it. Steel Pipes are used for food production and storage equipment, pumping and storage of oils, gases and acids, specialist components in the automotive industry, cutlery, surgical instruments and fasteners.

DetailsThe principal grades are austenitic (typically 16-26%Cr, 6-22Ni); ferritic (10.5-28%Cr with no/low Ni); martensitic (higher carbon content than ferritic and typically 12-19%Cr with low/no Ni); and duplex, a dual-phase austenitic/ferritic steel (Cr>21%, Ni <8%).

On the back of our expertise and knowledge, we look forward to put ourselves in the top bracket of the industry. We, as a Supplier and Exporter of Galvanized Steel Plates, push on to offer unrivaled quality to realize our dream. Galvanized Steel Plates are made by passing Cold Rolled Coil through a molten zinc bath. The process makes it corrosion resistant. It is available in shapes of coils and sheets. The Plates can be used for domestic applications, building applications, automotive applications, lighting fixtures, drums and various kinds of sections applications and profiled sheets.

We, as a proud Supplier and Exporter of Hot Rolled Coils, bring you the matchless quality. Hot Rolled Coils are obtained by rolling on a hot strip mill from slabs. It is available in both coil and sheet form. The Coil’s typical thickness ranges between1 - 25mm and width up to 2, 500mm. The Rolled Coils are used as feedstock as well as directly used for various industrial applications such as steel tubes used in transport, construction, shipbuilding, gas containers, pressure vessels and energy pipelines. The variation of Coil with anti-slip surface and a diamond/teardrop pattern is used for stairs, industrial floors and tailboards for goods vehicles.

Having made our mark in the industry for our consummate quality, we endeavor to keep up the good work. We, as a Supplier and Exporter of Coated Corrugated Sheet, put quality over anything else in our priority list. Coated Corrugated Sheet is available in a range of variations in thickness, width, surface quality and surface finish.  Coated Sheet is durable, corrosion resistant, robust and sturdy. It is commonly used for metal roofing and automotive manufacturing.

Leveraging the knowledge and expertise we have developed over time, we aim to stand among the elites in the industry. We, as a Supplier and Exporter of Steel Structural Materials, put in relentless efforts to make it happen by producing eminent quality. Steel Structural Materials include steel products such as angles, channels, beams or columns, which are usually formed with a specific cross section shape. Structural Materials are used for large construction projects such as multistory building or bridges.

Owing to our expertise in the field, we strive to cement our status as a famous figure in the industry. We, as a Supplier and Exporter of Steel Square Bars, offer you the immaculate quality. Steel Square Bars are made of hot rolled coil rolled on a hot strip mill from slabs. These materials are sourced from the trusted vendors who guarantee a consistently supreme level of quality.

Material DetailsHot rolled coil is typically 1 - 25mm thick and up to 2, 500mm wide. Hot rolled coil is produced as a feedstock for cold rolled coil and coated coil, but also for direct use in a variety of industrial applications including steel tubes used in transport, construction, shipbuilding, gas containers, pressure vessels and energy pipelines. Hot rolled sheet with an anti-slip surface and a diamond or teardrop pattern is typically used for stairs, industrial floors and tailboards for goods vehicles.

Keenly committed towards the absolute client satisfaction, we work hard to deliver the promise. We, as a Supplier and Exporter of Galvanized Steel Sheet, offer the unsurpassed quality. Galvanized Steel Sheet is made by passing cold rolled sheet through a molten zinc bath making it corrosion resistant.  Galvanized Steel Sheet is available in both coiled and sheet form. The typical thickness is 0.2 to 3 mm and width 600 to 2000mm. The Sheets are used for domestic appliances, building applications (e.g. wall elements, roofing, automotive parts (e.g. underbody), lighting fixtures, drums and various kinds of sections and profiled sheets.

Recognized for our excellence in attaining complete client satisfaction, we strive to rank among the best in the industry. We, as a Supplier and Exporter of Steel Reinforcing Bar, offer you the unsurpassed quality. Steel Reinforcing Bar, also known as Rebar, is made of steel billet with surface deformations. The Bars can be shaped in straight length as well as coiled. The Steel Bars are largely used for the reinforcement of concrete in the construction industry.

We, as a Supplier and Exporter of Steel Wire Rods, take pride in the flawless quality that we offer. Steel Wire Rods are made from steel billet, of size ranging between 5.5m-20m diameters, hot rolled reducing its diameter in the drawing process that is correlated to Rod’s drawability. The low carbon rods are used for fencing wire and concrete reinforcing mesh while high, medium carbon rods are used in car tyre reinforcement, and steel cords. Other applications of Steel Rods are to make fasteners and engineering bearings or used as filler metal for welding.

Having created a solid reputation for delivering premium quality, we strive to continue in the same vein. We, as a Supplier and Exporter of Metal Seamless Tubes, offer the best quality available. Metal Seamless Tubes are manufactured by piercing ingots, billets or bars to obtain tube hollows and then rolling, extruded or drawn over a mandrel to be transformed into shape of tubes. Tubes are finished by reducing the cross-section making use of hot or cold rolling or drawing.

On the back of our vast expertise, we as Supplier and Exporter of Cold Rolled Sheet take pride in delivering you unequaled quality. Cold Rolled Sheet is made by rolling at room temperature. The metallurgic design equips the Sheet with striking features such as high formability, deep drawability, high strength, high dent resistance, good magnetic properties, enamelability and paintability. It is used in automobiles, bathtubs and various appliances such as refrigerators, washers, dryers etc.

Backed by our team of trained professionals, we strive to bring you the unsurpassed quality. We, as a Supplier and Exporter of Hot Rolled Plates, ensure the quality by undergoing a meticulous process of selection of vendors who put quality on top of their priority list. Hot Rolled Plates are made from steel slab, thickness ranging between 8 to 200mm and maximum width is 5000mm, rolled to a plate. The Plates are useful for application in the shipbuilding, pressure equipment, and construction industries.

We, as a Supplier and Exporter of Tin Coated Steel Sheet, strive to attain a 100% client satisfaction. Tin Coated Steel Sheet is made of a cold reduced steel sheet coated with a thin layer of tin. The tin mill products are available in a variety of types including electrolytic tinplate, electrolytic chromium coated steel and black plate, an uncoated product. The Steel Sheet is corrosion resistant and food compatible. It is largely used in packaging products such as oil, paints, aerosols, food, drinks etc.

Harnessing our knowledge and understanding, we aim to clinch the top status in the industry. We, as a Supplier and Exporter of Stainless Steel Pipes, put a huge emphasis on maintenance of our quality. Hence, we forge relationships with only those vendors who are able to deliver nothing but finest quality. Stainless Steel Pipes are corrosion resistant thanks to the added chromium to it. Steel Pipes are used for food production and storage equipment, pumping and storage of oils, gases and acids, specialist components in the automotive industry, cutlery, surgical instruments and fasteners.

DetailsThe principal grades are austenitic (typically 16-26%Cr, 6-22Ni); ferritic (10.5-28%Cr with no/low Ni); martensitic (higher carbon content than ferritic and typically 12-19%Cr with low/no Ni); and duplex, a dual-phase austenitic/ferritic steel (Cr>21%, Ni <8%).

On the back of our expertise and knowledge, we look forward to put ourselves in the top bracket of the industry. We, as a Supplier and Exporter of Galvanized Steel Plates, push on to offer unrivaled quality to realize our dream. Galvanized Steel Plates are made by passing Cold Rolled Coil through a molten zinc bath. The process makes it corrosion resistant. It is available in shapes of coils and sheets. The Plates can be used for domestic applications, building applications, automotive applications, lighting fixtures, drums and various kinds of sections applications and profiled sheets.

We, as a proud Supplier and Exporter of Hot Rolled Coils, bring you the matchless quality. Hot Rolled Coils are obtained by rolling on a hot strip mill from slabs. It is available in both coil and sheet form. The Coil’s typical thickness ranges between1 - 25mm and width up to 2, 500mm. The Rolled Coils are used as feedstock as well as directly used for various industrial applications such as steel tubes used in transport, construction, shipbuilding, gas containers, pressure vessels and energy pipelines. The variation of Coil with anti-slip surface and a diamond/teardrop pattern is used for stairs, industrial floors and tailboards for goods vehicles.

Having made our mark in the industry for our consummate quality, we endeavor to keep up the good work. We, as a Supplier and Exporter of Coated Corrugated Sheet, put quality over anything else in our priority list. Coated Corrugated Sheet is available in a range of variations in thickness, width, surface quality and surface finish.  Coated Sheet is durable, corrosion resistant, robust and sturdy. It is commonly used for metal roofing and automotive manufacturing.

Leveraging the knowledge and expertise we have developed over time, we aim to stand among the elites in the industry. We, as a Supplier and Exporter of Steel Structural Materials, put in relentless efforts to make it happen by producing eminent quality. Steel Structural Materials include steel products such as angles, channels, beams or columns, which are usually formed with a specific cross section shape. Structural Materials are used for large construction projects such as multistory building or bridges.

Owing to our expertise in the field, we strive to cement our status as a famous figure in the industry. We, as a Supplier and Exporter of Steel Square Bars, offer you the immaculate quality. Steel Square Bars are made of hot rolled coil rolled on a hot strip mill from slabs. These materials are sourced from the trusted vendors who guarantee a consistently supreme level of quality.

Material DetailsHot rolled coil is typically 1 - 25mm thick and up to 2, 500mm wide. Hot rolled coil is produced as a feedstock for cold rolled coil and coated coil, but also for direct use in a variety of industrial applications including steel tubes used in transport, construction, shipbuilding, gas containers, pressure vessels and energy pipelines. Hot rolled sheet with an anti-slip surface and a diamond or teardrop pattern is typically used for stairs, industrial floors and tailboards for goods vehicles.

Keenly committed towards the absolute client satisfaction, we work hard to deliver the promise. We, as a Supplier and Exporter of Galvanized Steel Sheet, offer the unsurpassed quality. Galvanized Steel Sheet is made by passing cold rolled sheet through a molten zinc bath making it corrosion resistant.  Galvanized Steel Sheet is available in both coiled and sheet form. The typical thickness is 0.2 to 3 mm and width 600 to 2000mm. The Sheets are used for domestic appliances, building applications (e.g. wall elements, roofing, automotive parts (e.g. underbody), lighting fixtures, drums and various kinds of sections and profiled sheets.

Recognized for our excellence in attaining complete client satisfaction, we strive to rank among the best in the industry. We, as a Supplier and Exporter of Steel Reinforcing Bar, offer you the unsurpassed quality. Steel Reinforcing Bar, also known as Rebar, is made of steel billet with surface deformations. The Bars can be shaped in straight length as well as coiled. The Steel Bars are largely used for the reinforcement of concrete in the construction industry.

We, as a Supplier and Exporter of Steel Wire Rods, take pride in the flawless quality that we offer. Steel Wire Rods are made from steel billet, of size ranging between 5.5m-20m diameters, hot rolled reducing its diameter in the drawing process that is correlated to Rod’s drawability. The low carbon rods are used for fencing wire and concrete reinforcing mesh while high, medium carbon rods are used in car tyre reinforcement, and steel cords. Other applications of Steel Rods are to make fasteners and engineering bearings or used as filler metal for welding.

Having created a solid reputation for delivering premium quality, we strive to continue in the same vein. We, as a Supplier and Exporter of Metal Seamless Tubes, offer the best quality available. Metal Seamless Tubes are manufactured by piercing ingots, billets or bars to obtain tube hollows and then rolling, extruded or drawn over a mandrel to be transformed into shape of tubes. Tubes are finished by reducing the cross-section making use of hot or cold rolling or drawing.

On the back of our vast expertise, we as Supplier and Exporter of Cold Rolled Sheet take pride in delivering you unequaled quality. Cold Rolled Sheet is made by rolling at room temperature. The metallurgic design equips the Sheet with striking features such as high formability, deep drawability, high strength, high dent resistance, good magnetic properties, enamelability and paintability. It is used in automobiles, bathtubs and various appliances such as refrigerators, washers, dryers etc.

Backed by our team of trained professionals, we strive to bring you the unsurpassed quality. We, as a Supplier and Exporter of Hot Rolled Plates, ensure the quality by undergoing a meticulous process of selection of vendors who put quality on top of their priority list. Hot Rolled Plates are made from steel slab, thickness ranging between 8 to 200mm and maximum width is 5000mm, rolled to a plate. The Plates are useful for application in the shipbuilding, pressure equipment, and construction industries.

We, as a Supplier and Exporter of Tin Coated Steel Sheet, strive to attain a 100% client satisfaction. Tin Coated Steel Sheet is made of a cold reduced steel sheet coated with a thin layer of tin. The tin mill products are available in a variety of types including electrolytic tinplate, electrolytic chromium coated steel and black plate, an uncoated product. The Steel Sheet is corrosion resistant and food compatible. It is largely used in packaging products such as oil, paints, aerosols, food, drinks etc.