Product / Services
Post Buy Requirement
Suresh Indu Lasers Pvt. Ltd.

Suresh Indu Lasers Pvt. Ltd.
Katraj, Pune, Maharashtra

Write a Review
Call Now Call Now

Our Products

  1. Laser Instruments 3 Products available
  2. Laser Cutting Machine 3 Products available

  3. Die Cutting Machine

    1 Products available

  4. Manufacturing & Assembling Services

    1 Products available

Laser Instruments

Our product range contains a wide range of Diode Pumped Laser Marking Machine, Co2 Laser Engraving Machine, Co2 Laser Marking Machine, Laser Engraving Machines and yag laser machines

Diode Pumped Laser Marking Machine

Diode Pumped Laser Marking Machine
We are engaged in manufacturing, exporting & supplying of Diode Pumped Laser Marking Machine. The Diode Pumped Laser Marking Machine or Accuwrite-D series offered by us works on HIGHLIFE Diode Pumped Laser technology. We configure Diode Pumped Laser Marking Machine for various production setups. With Accuwrite D series, clients can also use Mark on the fly or online marking options. Highlights :
  • The system consists of High life Diode pumped chamber providing uninterrupted diode life of 20, 000 Hrs, Q-switch and resonator optics.
  • The complete system is enclosed in sealed enclosure, which ensures usage of the system in Harsh Environmental conditions and reduces maintenance involved due to climatic conditions.
  • Laser power up to 100 watts can be delivered in this series making this series highly suitable for Deep marking, Micro machining, Steel Marking, etc.
  • The complete system consists of Laser with scan head, PC with control board, power supply, Solid State Chiller (optional), software, and a laser safety enclosure with a motorized Z axis.
  • SIL has in-house capability to service and replace diodes after their lifetime, allowing us to reduce the replacement cost less than others
  • All SIL Laser Markers are monitored by a Smart Machine Control Interface (SMCI technology introduced by SIL) that are capable of communicating for any fault reported directly to our service center (Internet connectivity needed for this feature at site of machine installation)
Advantages :
  • Power up to 100 watt in CW and Pulsed
  • Better wall plug efficiency compared to lamp pumped technology
  • Diode life > 20, 000 hrs
  • Good Beam Quality (TEM00 mode M2 = 2.8)
  • Stable and consistent repeatability
  • Very flexible Pulse frequency from 100 Hz to 50 KHz
  • Maximum single pass depth up to 1mm (stainless steel)
  • Compact Gas to water cooling Solid state Chiller (Optional)
  • Maintenance free operation with 2 years of unlimited usage warranty
Packaging Material : Wooden Crate
View Complete Details
Ask Latest Price & Details
CO2 Laser Engraving Machine

CO2 Laser Engraving Machine
Our company is a prominent Manufacturer, Exporter & Supplier of CO2 Laser Engraving Machine. The CO2 Laser Engraving Machine offered by us is used for various cutting and engraving applications. The laser power in CO2 Laser Engraving Machine ranges from 10 W to 100 W with the table size of 300 X 300 mm to 1m X 1m. We supply highly durable, efficient and sturdy CO2 Laser Engraving Machine that can be used for different non-metallic materials like plastic, acrylic, paper, wood, granite, etc. Packaging Material : Wooden Crate Laser Cutting System Specifications : The Laser cutting system comprises of two major subsystems namely; Laser & CNC table. The details of these subsystems and their components are listed bellow :
  • Laser
    • Laser head
    • RF Power supply/DC
  • Power Supply
    • Controller
    • Chiller
    • Beam Delivery system
      • Mirrors
      • Focusing lens
  • CNC table
    • Sheet cutting bed
    • CNC controller
    • Electrical panel
    • Exhaust
CO2 Laser LEC-100 Specifications :
  • Power output : 100 Watt
  • Mode : TEM
  • Beam Dia : 7 mm
  • Beam Div. Full angle : 2.2 mrad
  • M2 : 1.1
  • Polarisation : Random
  • Operating Mode : CW or pulsed
  • Power stability : 1 %
  • Wavelength : 10.6 m
  • Cooling : 1.5 lit./min
  • Warranty : 2 yrs.
  • Laser head size : 175 x 15 x 15 cm
  • Weight : 10 kg.
  • Power Supply size : 50 x 20 x 16 cm
CNC table : 1 m x 1 m travel, stepper motor drive, controller with software to cut any desired shape or engrave for Industrial production or Education in laser processing Material for Engraving :
  • Polyster film
  • Rubber stamp
  • Rubber
  • Gasket
  • Bamboo
  • Plexiglass
  • Leather
  • Polymers
  • Fabrics
  • Acrylic
  • Wood
  • Polyesters
  • Glass
  • Polyamide
  • Crystal
  • ABS
  • Coated metal
  • PVC
  • Stone, Granites & marble
  • Polyethylene
  • Mat boards & paper products
  • Melamine
  • Styrene

    • Cutting Data (Non Metals)

    MaterialPower (W)Thickness mmSpeed mm/min
    Acrylic10032000
    Acrylic10061000
    Acrylic10010650
     Hardwood10042800
    MDF10071500
    Polyethylene Film100---100000
    Plywood10053000
    Plywood10092000
    Shoe Inserts100--3810
    Packaging Pet50--25400
    Cell phone Keypad25--0.76
    Foam Boards10025.41270
    Wood Veneer250.56350
    Sand Paper1000.533020
    Velvet Cloth25--5080
    Styzafoam Panels5076.2508
    Speaker Membrane25--0.85
    Hoover Bags100--29.63
    Polyester Sheet200.136.35

    Cutting Data (Metals)

    MaterialPower (W)Thickness (mm)Speed (mm/min)
    Stainless Steel1000.51800
    Stainless Steel1001800
    Stainless Steel1001.5400
    Mild Steel1001400
    View Complete Details
    Ask Latest Price & Details
    CO2 Laser Marking Machine

    CO2 Laser Marking Machine
    We are an expert Manufacturer, Exporter & Supplier of CO2 Laser Marking Machine. The CO2 Laser Marking Machine offered by us is a complete compact system that includes scribing, processing table, thin metals, non-metal cutting and marking engraving. The CO2 Laser Marking Machine is best suited for applications like cutting and thin sheet scribing. We supply CO2 Laser Marking Machine (Accucut) in different specifications and configurations as per the requirements. Packaging Material : Wooden Crate
    View Complete Details
    Ask Latest Price & Details
    Tell Us What are you looking for? Will call you back

    Contact Us

    View Contact No.
    Retailer of Laser Instruments from Pune, Maharashtra by Suresh Indu Lasers Pvt. Ltd.
    Product / Services
    Post Buy Requirement
    Suresh Indu Lasers Pvt. Ltd.

    Suresh Indu Lasers Pvt. Ltd.
    Katraj, Pune, Maharashtra

    Write a Review
    Call Now Call Now

    Our Products

    1. Laser Instruments 3 Products available
    2. Laser Cutting Machine 3 Products available

    3. Die Cutting Machine

      1 Products available

    4. Manufacturing & Assembling Services

      1 Products available

    Laser Instruments

    We offer the best product range of Diode Pumped Laser Marking Machine, Co2 Laser Engraving Machine, Co2 Laser Marking Machine, carbon dioxide laser machines and Laser Engraving Machines.

    Diode Pumped Laser Marking Machine

    Diode Pumped Laser Marking Machine
    We are engaged in manufacturing, exporting & supplying of Diode Pumped Laser Marking Machine. The Diode Pumped Laser Marking Machine or Accuwrite-D series offered by us works on HIGHLIFE Diode Pumped Laser technology. We configure Diode Pumped Laser Marking Machine for various production setups. With Accuwrite D series, clients can also use Mark on the fly or online marking options. Highlights :
    • The system consists of High life Diode pumped chamber providing uninterrupted diode life of 20, 000 Hrs, Q-switch and resonator optics.
    • The complete system is enclosed in sealed enclosure, which ensures usage of the system in Harsh Environmental conditions and reduces maintenance involved due to climatic conditions.
    • Laser power up to 100 watts can be delivered in this series making this series highly suitable for Deep marking, Micro machining, Steel Marking, etc.
    • The complete system consists of Laser with scan head, PC with control board, power supply, Solid State Chiller (optional), software, and a laser safety enclosure with a motorized Z axis.
    • SIL has in-house capability to service and replace diodes after their lifetime, allowing us to reduce the replacement cost less than others
    • All SIL Laser Markers are monitored by a Smart Machine Control Interface (SMCI technology introduced by SIL) that are capable of communicating for any fault reported directly to our service center (Internet connectivity needed for this feature at site of machine installation)
    Advantages :
    • Power up to 100 watt in CW and Pulsed
    • Better wall plug efficiency compared to lamp pumped technology
    • Diode life > 20, 000 hrs
    • Good Beam Quality (TEM00 mode M2 = 2.8)
    • Stable and consistent repeatability
    • Very flexible Pulse frequency from 100 Hz to 50 KHz
    • Maximum single pass depth up to 1mm (stainless steel)
    • Compact Gas to water cooling Solid state Chiller (Optional)
    • Maintenance free operation with 2 years of unlimited usage warranty
    Packaging Material : Wooden Crate
    View Complete Details
    Ask Latest Price & Details
    CO2 Laser Engraving Machine

    CO2 Laser Engraving Machine
    Our company is a prominent Manufacturer, Exporter & Supplier of CO2 Laser Engraving Machine. The CO2 Laser Engraving Machine offered by us is used for various cutting and engraving applications. The laser power in CO2 Laser Engraving Machine ranges from 10 W to 100 W with the table size of 300 X 300 mm to 1m X 1m. We supply highly durable, efficient and sturdy CO2 Laser Engraving Machine that can be used for different non-metallic materials like plastic, acrylic, paper, wood, granite, etc. Packaging Material : Wooden Crate Laser Cutting System Specifications : The Laser cutting system comprises of two major subsystems namely; Laser & CNC table. The details of these subsystems and their components are listed bellow :
    • Laser
      • Laser head
      • RF Power supply/DC
    • Power Supply
      • Controller
      • Chiller
      • Beam Delivery system
        • Mirrors
        • Focusing lens
    • CNC table
      • Sheet cutting bed
      • CNC controller
      • Electrical panel
      • Exhaust
    CO2 Laser LEC-100 Specifications :
    • Power output : 100 Watt
    • Mode : TEM
    • Beam Dia : 7 mm
    • Beam Div. Full angle : 2.2 mrad
    • M2 : 1.1
    • Polarisation : Random
    • Operating Mode : CW or pulsed
    • Power stability : 1 %
    • Wavelength : 10.6 m
    • Cooling : 1.5 lit./min
    • Warranty : 2 yrs.
    • Laser head size : 175 x 15 x 15 cm
    • Weight : 10 kg.
    • Power Supply size : 50 x 20 x 16 cm
    CNC table : 1 m x 1 m travel, stepper motor drive, controller with software to cut any desired shape or engrave for Industrial production or Education in laser processing Material for Engraving :
    • Polyster film
    • Rubber stamp
    • Rubber
    • Gasket
    • Bamboo
    • Plexiglass
    • Leather
    • Polymers
    • Fabrics
    • Acrylic
    • Wood
    • Polyesters
  • Glass
  • Polyamide
  • Crystal
  • ABS
  • Coated metal
  • PVC
  • Stone, Granites & marble
  • Polyethylene
  • Mat boards & paper products
  • Melamine
  • Styrene

    • Cutting Data (Non Metals)

    MaterialPower (W)Thickness mmSpeed mm/min
    Acrylic10032000
    Acrylic10061000
    Acrylic10010650
     Hardwood10042800
    MDF10071500
    Polyethylene Film100---100000
    Plywood10053000
    Plywood10092000
    Shoe Inserts100--3810
    Packaging Pet50--25400
    Cell phone Keypad25--0.76
    Foam Boards10025.41270
    Wood Veneer250.56350
    Sand Paper1000.533020
    Velvet Cloth25--5080
    Styzafoam Panels5076.2508
    Speaker Membrane25--0.85
    Hoover Bags100--29.63
    Polyester Sheet200.136.35

    Cutting Data (Metals)

    MaterialPower (W)Thickness (mm)Speed (mm/min)
    Stainless Steel1000.51800
    Stainless Steel1001800
    Stainless Steel1001.5400
    Mild Steel1001400
    View Complete Details
    Ask Latest Price & Details
    CO2 Laser Marking Machine

    CO2 Laser Marking Machine
    We are an expert Manufacturer, Exporter & Supplier of CO2 Laser Marking Machine. The CO2 Laser Marking Machine offered by us is a complete compact system that includes scribing, processing table, thin metals, non-metal cutting and marking engraving. The CO2 Laser Marking Machine is best suited for applications like cutting and thin sheet scribing. We supply CO2 Laser Marking Machine (Accucut) in different specifications and configurations as per the requirements. Packaging Material : Wooden Crate
    View Complete Details
    Ask Latest Price & Details
    Tell Us What are you looking for? Will call you back

    Contact Us

    View Contact No.