Optimally designed with both edges folded to achieve high surface area for given volume, our Structured Film Fill Media is made by continuous forming. Our Structured Film Fill Media offer minimum resistance to airflow, providing more cooling by lower power consumption. The Structured Film Fill Media has uniform thickness throughout. Durable folded edges provide strength at critical locations on the fill. The Structured Film Fill Media is easy-to-glue at site, thus saving on transportation costs.

We offer splash type fills for effective water cooling. The forbearing nature of Splash Fills towards 'dirty' water and imperfect water distribution is offset by the need to have larger towers and thus higher capital costs as well as pumping heads. Splash Fills work on the principle of causing the flowing water to fall through a grid of "splash bars" with which the water droplet breaks up, thus increases the contact time between water and air. We have a wide range of products in the splash type fill environment, including v-bars, perforated slats, triangular bars & rectangular slats. The perforated v-bar is the most extensively used product in the industry. The standard sizes as well as the standard diamond shape round perforations in the 'v' bar ensure the cooling tower to perform as published in the CTI bulletins – particularly for the configurations – 8" x 8" perpendicular to airflow, 8" x 8" parallel to airflow and 16" x 8" parallel to airflow. This enables the cooling tower designer to have the complete information about calculating the thermal capabilities of the cooling tower along with its power requirements. These splash bars are supported on lightweight thin section grids ensuring a minimum thickness of 1.5 mm for the v-bar and a maximum distance of 600mm between adjacent v-bars will help reduce the possibilities of sagging. Compact locking of the v-bar on the grid using v-bars clip will also ensure a sturdy fill structure. In addition to this, not only with v-bars but also with all Splash Fills maintenance of a level configuration is essential. If not done, water will channel to the low area of the fill configuration leaving areas devoid of water where no heat transfer will occur. Given a choice of flow paths, air will travel the path of least resistance i.e. where there is a smaller water curtain the v-bar system has proven to be a superior system to upgrade cross flow cooling towers that have wood splash fill and for new construction where dirty water would clog film fills. Existing stainless steel or PVC coated wire mesh allows for a complete system utilizing the available splash bar technology. The design of our v-bar clip provides secure locking capabilities preventing wear on both the wire hanger and the fill. The raised center rib and the tab locks prevent the v-bar from slipping once locked into place. Clips are made of P.P.C.P that is a high impact resistance material able to remain flexible in an extensive range of temperature.

We are offering 65mm Triangular Splash Bars that serve as a cost effective, lightweight and longer lasting alternative to the PCC fills. These Triangular Splash Bars are manufactured in various sizes 20 x 20 x 30mm, 35 x 35 x 50mm, 45 x 45 x 45mm, 45 x 45 x 55 mm & the 60mm equilateral triangle is installed to encounter minimum assistance to airflow, which are one of the efficient Triangular Splash Bars designs available.   Specifications :     Rectangular splash bars "U" channel Tube settlor P.V.C retainer channel Derlin "d" lock 103 mm drift eliminator multi spacer 103 mm drift eliminator spacer 146 mm drift eliminator spacer

We are offering a wide range of PVC Conduit Pipes , electric conduit pipes, rigid pipes and casing capping, etc. These PVC Conduit Pipes are manufactured using high-grade polyvinyl chloride and are widely used in buildings for different purposes. Our range of PVC Conduit Pipes is valued for attributes like high chemical resistance, excellent insulation property, high tensile strength, great impact resistance, fire resistant, moisture resistant, etc. We provide these PVC Conduit Pipes in different dimensions and lengths to meet specific requirements of the clients.

• MOQ 1000 Meter

UPVC Plumbing Pipes that we offer are widely demanded in plumbing and agricultural applications. Also, these UPVC Plumbing Pipes are used for residential and commercial electrical & telecommunication system. Manufactured using unplasticized polyvinyl chloride material, our UPVC Plumbing Pipes is appreciated for durability, light weight, impact resistance and corrosion resistance. Moreover, we provide these UPVC Plumbing Pipes in different sizes and dimensions.

We are offering PVC Drift Eliminators manufactured from rigid PVC and are designed to remove entrained particles from air steam efficiently, with minimum pressure drop, thereby reducing the fan power requirement when the air passes through the drift Eliminator. Water droplets are separated from the air drift at the three direction change points on the drift eliminator. For crossflow tower applications, the almost vertical water conduits provided by the SPC 100 drift eliminator remove the water droplets out of the drift eliminator area and return them back into the tower and does not allow any re-entry. The special locking pin arrangement for SPC-100 facilitates quick and simple assembly at site. When used in counter-flow cooling towers, the measurable residual liquid load behind a droplet separator characterizes its efficiency. The performance data of our droplet separators have been determined under laboratory conditions. At a face velocity (CA) of 3.5 ms and a specific water flow (rw) -22tm2 h, the residual liquid load of the air is 15mgm3. If this residual load is related to the circulating cooling water volume this equates to a value smaller than 0.001%.   Fundamental conditions required to achieve these high efficiencies in practice are, a workman like installation, the droplet separator sections must be installed without any gaps between themselves or the tower walls to ensure by passing does not take place. The face value shall not exceed the maximum permissible value at any position across the total area of the separator. Any performance testing of the separators must be carried out immediately above the separators and by using a test method consistent with that employed in our laboratory or otherwise agreed with ourselves. We can advise on the likely operating efficiencies of specific towers provided that their operating data are made available to us.       Application Areas : Primary setting in wastewater treatment plants (suspended and flocculated solids) Secondary (biological solids) setting in wastewater treatment plants Solid-liquid separation in potable and industrial process water treatment plants, Anaerobic digesters (restrict loss of solids) Ash handling units in thermal power plants Process industry (material recovery from wash storm water) Oil-water separation