Our Products
Bearings
2 Products availableHydraulic And Pneumatic Cylinders
1 Products availableBrushes
1 Products availableIndustrial & Engineering Products
1 Products availableCoir & Agro Products
1 Products availablePlastic Sheets
1 Products availableWe are engaged in offering a wide range of Carbon Packing For Turbine which is widely used in gas, water and steam turbines. The gland rings, we are offering, find extensive application in power plants, electricity boards, textiles, cement and sugar industries. These gland rings are used to seal low pressure fans & blowers, steam turbine gas turbines, impulse and water turbines. These are used as piston rings in compressors as piston rod packing in various components of guide rings, pistons and piston rings. Furthermore, these are also used to seal liquids and gases, which restrict the leakage.
We provide different types of Carbon Vanes for various types of Vacuum Pumps. The following features of our Carbon Graphite Vanes are:
Self lubricating properties, Low specific density, Non reactive
They find an assortment of application in diverse areas such as rotary pumps that are used for water, petrol, fuel OILSand other liquids. They are also efficiently used in dry and wet rotary pumps, compressors and vane type vacuum pumps.
We are one of the prominent manufacturers, suppliers and exporters of Packing Rings. These are carbon gland packing rings and piston rings that are used in the sealing of liquids and gases, restricting leakage to a minimum. Our professionals make sure that the range is in compliance with the exact specifications provided by the clients.
We manufacture carbon Brushes from world's best material. Carbon Brushes are widely used in D.C, Slipring Motors & Alternators carbon is good current collector. So they smoothly supply the current. We are particular in selecting the proper grades for proper application to avoid sparking, breakdowns & lengthen the life of carbon brushes.
We Supply high Alumina Ceramics seal faces from 95% to 99% Aluminia as per below datasheets. This Ceramics ware parts are specially developed for chemical plant seal face applications and other similar applications in which corrosive attack is likely to be particularly severe. This material has been subjected to extensive and rigorous laboratory testing to determine the effects of various reagents/chemicals on surface finish. The stability to acid of components made from this material has been determined to be within 0-10mg mg/cm2. (CVD Specifications).
Applications
Unit | AI2O3 - 99% | AI2O3 - 97% | |
Purity | % | >99.5 | >97.0 |
Density | g/cm2 | 3.89 | 3.71 |
Hardness Vickers 1kg | kg/mm2 | 2000 | 1900 |
Moduls of Elasticity | GPa | 330 | 280 |
Fracture toughnees | MPa*m1/2 | 3.8 | 3.5 |
Fracture Strength (MOR) | MPa | 330 | 320 |
Compressive Strength | MPa | 2600 | 2300 |
Thermal Expansion (CTE) | 10-6/K | 8.2 | 8.0 |
Thermal Conductivity | w/(m-K) | 30 | 26 |
Encapsulated PTFE Viton O-rings We offer encapsulated PTFE viton O-rings. They are available in various dimensions and sizes and are used in the chemical industries.
At SISPL We Manufacture Fibre (Phenolic - Fabric Base) Moulded parts, We can do any type of Compression Moulding up to 17 to 100Kgs. weight single piece. We Manufacture Fibre Products like - Fibre Bearing - Trolly Wheels - Bearing Housings and Customized Products.
We are manufacturing fibre bearings & Fibre keys with our other products mainly used in Hot rolling & Re rolling Mills. Creative bearing are essentially solid manufactured from cotton fabric impregnated with phenolic resin and compressed under High pressure with controlled temperature.The Unique Features:
They hardly require costly machining before they are fitted on the roll-stands
We manufactures cast nylon and Nylon products widely used in Rolling & Re Rolling Mills. Our universal Nylon Pads & Nylon Brushes having the following advantages. They are used in Couplings & Brush Couplings.
Phenolic Fabric Rods & Tubes are moulded from the find weaved Cotton Fabric & Resin. They are manufactured in different sizes and according to customer's requirement. Our vendors use most appropriate fabrication method & technology to develop products. Further, our quality associates make use of testing tools to test offerings precisely on quality parameters prior to the shipment.
We are manufacturers and exporters of all kinds of industrial gears and industrial gearbox for industrial and machinery applications. These are manufactured using best quality raw material as hardened, superior quality alloy steel to ensure maximum wear resistance and strength. We are striving hard to ensure premium quality products made from superior quality raw material which are procured from reliable source. These find their application in Oil companies, Fertilizer industry and many more. Our Industrial Gears are available in following features:
Spur gears are simple, easily manufactured gears and are usually the first choice when exploring gear options. We offer an extensive range of Spur Gears which provides superior performance with easy handling and corrosion resistance and involves less maintenance. These industries are widely used in many industrial sectors basically engineering industry to fabricate premium quality material as alloy and metals. Facility of customization is provided to benefit our clients by offering them product in their desired shapes and sizes. They are available in following features:
Designs and engineers an extensive range of worm gears, available in different ratios in accordance to individual requirements. Worm gears are usually compact and serve as efficient means of speed reducers in diverse industries.