Super India Spares Private Limited

Jawahar Nagar, Mumbai, Maharashtra

We are manufacturing fibre bearings & Fibre keys with our other products mainly used in Hot rolling & Re rolling Mills. Creative bearing are essentially solid manufactured from cotton fabric impregnated with phenolic resin and compressed under High pressure with controlled temperature.The Unique Features:

• Light weight & easy to handle.
• Unique & Unparallel Hardness.
• They reduce power consumption.
• Very low co-efficient of friction with water lubrication. So, they minimise enormously lubricant cost.

They hardly require costly machining before they are fitted on the roll-stands

We Supplies custom made Carbon Seals, Carbon Face parts, Carbon Shaft Sleeves, and Carbon Bearings also Carbon Strips in (Resin Impregnated and Metalic Impregnated Grade) by using Schunk Grades (West Germany) as below attached datasheets with prompt delivery. We also supply Mechanical Carbon Blanks (Resin Impregnated and Metalic Impregnated Grade).

We make them available in various designs, shapes and sizes. Our graphite sealing rings range has close dimensional tolerance and is apt for usage as a part of mechanical seals in general utility pumps, water pumps and chemical pumps. The carbon sealing rings, we supply, are used as the wear face of various mechanical seals for the sealing of fluids in all types of industries. Carbon & graphite seal faces are compatible with a wide range of other counter faces also. So, these qualities of our products have made us one of the most reliable graphite sealing rings manufacture and suppliers in India.

We provide different types of Carbon Vanes for various types of Vacuum Pumps. The following features of our Carbon Graphite Vanes are:
Self lubricating properties, Low specific density, Non reactive
They find an assortment of application in diverse areas such as rotary pumps that are used for water, petrol, fuel OILSand other liquids. They are also efficiently used in dry and wet rotary pumps, compressors and vane type vacuum pumps.

We manufacture carbon Brushes from world's best material. Carbon Brushes are widely used in D.C, Slipring Motors & Alternators carbon is good current collector. So they smoothly supply the current. We are particular in selecting the proper grades for proper application to avoid sparking, breakdowns & lengthen the life of carbon brushes.

Phenolic Fabric Rods & Tubes are moulded from the find weaved Cotton Fabric & Resin. They are manufactured in different sizes and according to customer's requirement. Our vendors use most appropriate fabrication method & technology to develop products. Further, our quality associates make use of testing tools to test offerings precisely on quality parameters prior to the shipment.

We Supplies custom made Carbon Seals, Carbon Face parts, Carbon Shaft Sleeves, and Carbon Bearings also Carbon Strips in (Resin Impregnated and Metalic Impregnated Grade) by using Schunk Grades (West Germany) as below attached datasheets with prompt delivery. We also supply Mechanical Carbon Blanks (Resin Impregnated and Metalic Impregnated Grade).

We Supply high Alumina Ceramics seal faces from 95% to 99% Aluminia as per below datasheets. This Ceramics ware parts are specially developed for chemical plant seal face applications and other similar applications in which corrosive attack is likely to be particularly severe. This material has been subjected to extensive and rigorous laboratory testing to determine the effects of various reagents/chemicals on surface finish. The stability to acid of components made from this material has been determined to be within 0-10mg mg/cm2. (CVD Specifications).

Applications

Pump shaft sleeves
Pump plungers
Pump Cylinder liners

At SISPL We Manufacture Fibre (Phenolic - Fabric Base) Moulded parts, We can do any type of Compression Moulding up to 17 to 100Kgs. weight single piece. We Manufacture Fibre Products like - Fibre Bearing - Trolly Wheels - Bearing Housings and Customized Products.

We manufactures cast nylon and Nylon products widely used in Rolling & Re Rolling Mills. Our universal Nylon Pads & Nylon Brushes having the following advantages. They are used in Couplings & Brush Couplings.

• Easily Machinable
• High Mechanical strength
• Light weight
• Minimum maintenance
• High load bearing capacity
• Competitive rates

We are manufacturers and exporters of all kinds of industrial gears and industrial gearbox for industrial and machinery applications. These are manufactured using best quality raw material as hardened, superior quality alloy steel to ensure maximum wear resistance and strength. We are striving hard to ensure premium quality products made from superior quality raw material which are procured from reliable source. These find their application in Oil companies, Fertilizer industry and many more. Our Industrial Gears are available in following features:

• Maximum wear resistance and strength
• Premium quality products
• Reliable source

Spur gears are simple, easily manufactured gears and are usually the first choice when exploring gear options. We offer an extensive range of Spur Gears which provides superior performance with easy handling and corrosion resistance and involves less maintenance. These industries are widely used in many industrial sectors basically engineering industry to fabricate premium quality material as alloy and metals. Facility of customization is provided to benefit our clients by offering them product in their desired shapes and sizes. They are available in following features:

• Engineering industry
• Customization
• Less maintenance

Designs and engineers an extensive range of worm gears, available in different ratios in accordance to individual requirements. Worm gears are usually compact and serve as efficient means of speed reducers in diverse industries.

• In bronze (PB2S), Steel or as specified.
• Standard and custom made as per specifications, drawing or sample.
• Worm gears available on very tight delivery schedules.