Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

SE

Sunrom Electronics
location Isanpur, Ahmedabad, Gujarat

Write a Review
Call Now Call Now

Our Products

  1. Sensors 6 Products available
  2. Electric Circuit Components & Parts 4 Products available
  3. Telecommunication Equipment & System 3 Products available
  4. Electric Fittings And Components 3 Products available

  5. Sockets

    2 Products available

  6. Measuring Instruments & Equipment

    2 Products available

  7. Antenna

    2 Products available

  8. Laptops, Computers & Mainframes

    2 Products available

  9. Electronic Components

    2 Products available

  10. Finger Print Scanner

    1 Products available
  11. Others Products 29 Products available

Our Products

Our product range contains a wide range of Test Probes, Jumper Wires, Plastic Knob, PCB Spacer and Metal Washer

Strip Machine

Strip Machine
  • Voltage AC 250V
  • Current Rating 1 AMP
  • Withstanding Voltage 1000V AC For 1 minute
  • Contact Resistance 15 Milliohms Max
  • Insulation Resistance 1000 Megohms Min
  • Operating Temperature -55' C to +105' C
These are high quality breakaway strips which has female socket on one side and male pins on other side. Pitch 2.54mm(100mils) High quality machine pin headers socket - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers. Why machine pin? Machine pins are round making better contact with IC sockets and connectors.
View Complete Details
Ask Latest Price & Details
GPS Active Antenna

GPS Active Antenna
Magnetic Base, External, 3-5V 28dB, SMA, 3 Meter Cable, Give your GPS a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 3 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truck (or any other steel structure) Comes with a standard SMA connector on the end. This product does not include GPS module.
Ask Latest Price & Details
Load Cell Amplifier

Load Cell Amplifier
  • Working Voltage 5V DC Regulated
  • Output Reading Rate Every 100 Mili Seconds
Complete integrated front end containing amplifier, ADC, Digitizer output at 9600 baud rate output, The board is total solution for analog front end for Load Cell applications. This board is highly integrated in the sense it contains Instrumentation Amplifier, Analog to Digital Convertor and Digitizer which outputs serial data of 9600 baud rate for direct reading in kilograms. The output can be used to connect to microcontroller for further display and processing Or can be fed to PC serial port to view on terminal. The calibration functions in built in the board giving very accurate, stable and reliable output every time.
Ask Latest Price & Details
Remote Control Receiver

Remote Control Receiver
Control 4 relays through the RF keypad with range of around 100 meters. Board needs 12V DC for operation and the on board relays are capable to switch on DC and well as AC mains load like light and fan.
Ask Latest Price & Details
RF Remote Control

RF Remote Control
Control 8 relays through the RF keypad with range of around 100 meters. Board needs 12V DC for operation and the on board relays are capable to switch on DC and well as AC mains load like light and fan.
Ask Latest Price & Details
Spring Sensor Switch

Spring Sensor Switch
  • Maximum working voltage (Vmax) 12V
  • Maximum current (Imax) less than 5mA
  • Ambient temperature less than 100℃.
Internal spring triggers contact on external force. Can be used in variety of vibration detection projects. The two contacts of sensor are not connected in idle condition. When external force is acted upon either my movement or vibration, the sensor's two contact pin are closed and contact is made between the two pins. When the force is removed the sensor terminals returns back to open contacts.
View Complete Details
Ask Latest Price & Details
Ethernet Module

Ethernet Module
UART to Ethernet module which supports D2D forwarding and virtual serial. TTL & Ethernet Bidirectional Transparent Transmission This is a serial TTL to Ethernet module, used for data transparent transmission.USR-TCP232-T is a data transparent transmission equipment for converting TCP or UDP socket data to serial UART.
Ask Latest Price & Details
Channel Relay Board

Channel Relay Board
Isolated or Non-Isolated Control, 12V operated, 3V-5V control signal, can switch mains voltages, The board has four relays driven by ULN2803 IC. The board works on 12V but the input signal can come directly from microcontroller output working at 3V or 5V to control relays. Each relay can switch varierty of AC or DC high voltage, high current loads working at 110V or 220V AC mains like lights, fans, motors and such. The status of relay is indicated by individual LEDs.
Ask Latest Price & Details
Test Probes

Test Probes
₹ 11.80 / Piece Get Latest Price
  • Min. Order (MOQ) 4 Piece
  • Feature These make good electric contact and has long term durability
  • Product Code 6140
  • Polarity Female
  • Testing Pitch 1.91 mm
  • Diameter 1.02 mm
View Complete Details
Ask Latest Price & Details
Jumper Wires

Jumper Wires
₹ 29.50 / Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece
  • Type Male/Female
  • Product Code 4426
  • size 20cm (8 In)
  • Features These wires can be connected to any header with a 2.54mm(0.1
Ask Latest Price & Details

Plastic Knob

₹ 1.50 / Piece Get Latest Price
  • Min. Order (MOQ) 10 Piece
  • Product Code 6516
  • Size 6mm
Ask Latest Price & Details

PCB Spacer

₹ 3.50 / Piece Get Latest Price
  • Min. Order (MOQ) 10 Piece
  • Type Snap Fit
  • Height 12mm
  • Mount type Chassis Mount
  • Product Code 7044
Ask Latest Price & Details
Metal Washer

Metal Washer
₹ 0.30 / Piece Get Latest Price
  • Min. Order (MOQ) 100 Kilogram
  • Size M3 x 10mm
  • Material Metal
Ask Latest Price & Details
RS 232 Converter

RS 232 Converter

  • Operating Temperature -25degC to 70 degC at 95% max humidity
  • Size 58mm * 33mm * 19.5mm
  • Communication distance 1200m (RS-485) and 5m (RS-232)
RS232 Port powered, Passive, built in screw terminal, bidirectional half duplex 2 wire RS485, 600W surge protection by TVS, Industrial grade, Optional external standby power 5VDC suitable for baud rates up to 115.2 kbps, Auto switching TXRX mode.
Ask Latest Price & Details
ECG Electrode

ECG Electrode
Self Adhesive, Safe, Disposable, Center filled with electrode gel, Stick to chest for picking up ECG signals. Easy to stick to chest to pickup ECG signals. The center is filled with liquid electrode gel for good contact and pickup. Remove plastic backing sheet to expose the adhesive. Then affix to chest and connect wires to your ECG module for signal pickup. Gives good stablization and quick reading.
Ask Latest Price & Details
PIR Motion Detector

PIR Motion Detector
Compact and complete, easy to use Pyroelectric Infrared (PIR) Sensor Module for human body detection. Incorporating a Fresnel lens and motion detection circuit, suitable for a wide range of supply voltages and with low current drain. High sensitivity and low noise. Output is a standard TTL active low output signal indicated by on board LED.The PIR (Passive Infra-Red) Sensor is a pyroelectric device that detects motion by measuring changes in the infrared levels emitted by surrounding objects. This motion can be detected by checking for a high signal on a single IO pin. Module provides an optimised circuit that will detect motion up to 6 metres away and can be used in burglar alarms and access control systems. The PIR sensor and Fresnel lens are fitted onto the the PCB. This enables the board to be mounted inside a case with the detecting lens protruding outwards, whilst still allowing easy access to the controls inside the case.
Ask Latest Price & Details
Logic Analyzer

Logic Analyzer
Capture, Debug, Analyze, Troubleshoot, View digital signals like UARTI2CIRI2SSPIRemoteProtocol and such. A logic analyzer is an electronic instrument which displays signals in a digital circuit. A logic analyzer displays the captured data into timing diagrams, protocol decodes for easy troubleshooting and development.
Ask Latest Price & Details
LED Message Display

LED Message Display
  • Operates 5V (800mA max current)
Display accepts simple string through uart and implements scrolling of the text on LED Matrix display. You can connect microcontrollers directly to update the string or connect to PC to send string to scroll. It supports different scrolling speeds. It even supports static display of text without scrolling. Format for sending string is very simple and it can accept maximum of 255 characters of ASCII text. We have provided sample source code for testing with microcontroller as well as details on testing with PC terminal software.
Ask Latest Price & Details
USB Mouse

USB Mouse
Accepts any USB Mouse and outputs serial data for button press and movement cordinates The product is a USB Host which accepts any USB Mouse at its USB port and decodes the movement and button presses including scroll wheel. The data is output as serial TTL UART at 9600 baud rate for easy interfacing with various applications. The output is suitable for 3V or 5V level microcontroller applications.
Ask Latest Price & Details
LED Message Screen

LED Message Screen
Serial UART Input, Easy to use for static and scrolling messages. Display accepts simple string through uart and implements scrolling of the text on LED Matrix display. You can connect microcontrollers directly to update the string or connect to PC to send string to scroll. It supports different scrolling speeds. It even supports static display of text without scrolling. Format for sending string is very simple and it can accept maximum of 255 characters of ASCII text. We have provided sample source code for testing with microcontroller as well as details on testing with PC terminal software.
Ask Latest Price & Details
RS232 Interface

RS232 Interface
Test all 9 IO on standard RS232 port with LED indication and loopback test. The RS232 Interface tester can be connected across any serial port (at a SUB-D9 interface) to visually monitor the outputs on LED and set any input signals through switches. The interface tester is installed at an existing serial connection and offers easy testing as well as a loop-back connection test. It has a header for RS232 interface, providing easy access to all interface pins, allowing you to perform tests (e.g. with a multimeter test set, oscilloscope, etc.) during runtime.
Ask Latest Price & Details
RF Transmitter

RF Transmitter
  • Frequency Range 433.92 MHZ.
  • Supply Voltage 3~12V
  • Output Power 4~16dBm
  • Circuit Shape Saw
This 433 MHz ASK Wireless transmitter can be used in remote control applications, wireless data transfer applications, mobile robots and burglar alarms. This is an ASK Hybrid transmitter module at 433 Mhz. The transmitter Module employs a SAW-stabilized oscillator, ensuring accurate frequency control for best range performance. There is no requirement of external RF components except Antenna.
View Complete Details
Ask Latest Price & Details
Tactile Switches

Tactile Switches

Tactile Switch 6x6x7mm, Momentary Switch with height of 7mm, push to on, Tactile Feedback, Good Quality
Ask Latest Price & Details
Tag Card

Tag Card
  • Dimension 85x54x0.86mm
125Khz Passive read only tag with built in EM4102 chip having unique ID Passive RFID Tag in CARD form with unique ID embedded into it which can be read contactless using our RFID reader. The card is waterproof.This tag(transponder) is based on 125 Khz chip EM4102
Ask Latest Price & Details
Electronic LED Displays

Electronic LED Displays
8x8 LED Matrix Display - Red 2" Inch, 64 LEDs in 8x8 Matrix, each LED of 5mm diameter, We do not just sell things, We use them ourselves in our products, and provide you with high quality tested components for trouble free experience.
Ask Latest Price & Details
Trigger Switch

Trigger Switch
  • Digital output Supply voltage 3.3V-5V
  • Dimension of the board 3.2cm x 1.4cm
Detects if there is any vibration beyond the preset threshold. Outputs direct signal and as well as threshold trigger output. Detects if there is any vibration beyond the preset threshold. Outputs direct signal and as well as threshold trigger output.
Ask Latest Price & Details
Offline Battery Charger

Offline Battery Charger
  • Input Voltage 4.5V~5.5V
  • Fully charged voltage 4.2V
  • Working temperatur -10'C~85'C
  • Charging precision 1.5%
Charge Li-Ion batteries from on board MiniUSB connector from USB or external +5V source. With Mini-USB on board connector, you can directly connect to computer USB port for battery charging. If USB is not available you can use a external source voltage at IN+IN- padsGreat for DIY projects
View Complete Details
Ask Latest Price & Details
RF Communication Modules

RF Communication Modules
  • Dimension 15x29mm
  • Power supply 1.9~3.6V
  • IO port working voltage 0~3.3v / 5v
  • Transmitting rate +7dB
  • Transmission range 50-60 meters indoor and around 100 meters in open area
This module based on Nordic nRF24L01+, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band. Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst hardware protocol accelerator supporting a high-speed SPI interface for the application controller.
View Complete Details
Ask Latest Price & Details
AC Power Cable

AC Power Cable
  • Great Quality Black Color
  • Cable Type Heavy-Duty 18AWG
Length 1.8 meters, Copper 0.5 sq.mm, Molded pin, IEC C13 standard output pin, 250V 5A rated, Length 1.8 meters, Copper 0.5 sq.mm, Molded pin, IEC C13 standard output pin, 250V 5A rated, Length 1.8 meters, Copper 0.5 sq.mm, Molded pin, IEC C13 standard output pin, 250V 5A rated, Length 1.8 meters, Copper 0.5 sq.mm, Molded pin, IEC C13 standard output pin, 250V 5A rated, Length 1.8 meters, Copper 0.5 sq.mm, Molded pin, IEC C13 standard output pin, 250V 5A rated, Design: Female connector plugs directly into device and male connector plugs into standard outlet. Compatibility: Instruments, Computers, monitors, scanners, printers, and other devices that use a 3-pin power connector.
View Complete Details
Ask Latest Price & Details
PASSIVE COMPONENTS

PASSIVE COMPONENTS
Suitable for RFWIFI modules having IPEXIPX external antenna connector, operating at 2.4Ghz. Good for mounting module in a enclosure and keeping Antenna outside for excellent range.
Ask Latest Price & Details
Fingerprint Reader Module

Fingerprint Reader Module
This is a fingure print sensor module with TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 USB-Serial adapter. The user can store the finger print data in the module and can configure it in 1:1 or 1: N mode for identifying the person.The FP module can directly interface with 3v3 or 5v Microcontroller. A level converter (like MAX232) is required for interfacing with PC serial port. Optical biometric fingerprint reader with great features and can be embedded into a variety of end products, such as: access control, attendance, safety deposit box, car door locks
Ask Latest Price & Details
Wireless rs232 Modem

Wireless Rs232 Modem
  • Power supply 1.9~3.6V
  • IO port working voltage 0~3.3v / 5v
  • Transmitting rate +7dB
SPI interface RF transceiver, This module based on Nordic nRF24L01+, highly integrated, ultra low power (ULP) 2Mbps RF transceiver for the 2.4GHz ISM (Industrial, Scientific and Medical) band. Nordic nRF24L01+ integrates a complete 2.4GHz RF transceiver, RF synthesizer, and baseband logic including the Enhanced ShockBurst hardware protocol accelerator supporting a high-speed SPI interface for the application controller.
View Complete Details
Ask Latest Price & Details
SMD Switches

SMD Switches

Slide Switch SMD 2P2T - 6 pins - Side Offset Knob, PCB Mountable Slide Switch. Double Pole, Double Throw = DPDT having knob on offset at one side
Ask Latest Price & Details
Chip Bead

Chip Bead
They offer excellent anti-EMI properties and low DC resistance. Placed very close next to the interference source even with small size 0603. Perfect as data line filter and for uncoupling of distribution voltage.
Ask Latest Price & Details
RF Antenna

RF Antenna
  • Antenna size 48MM * 7.4MM * 1.0MM
  • Frequency Range 2.4 to 2.49 GHz
  • Antenna Dimensions 48MM * 7.4MM * 1.0 MM
Network type: IEEE 802.11n or 802.11 b g WIFI, Maximum gain: 4dBi (SONY adhesive), Standing wave ratio: less than 1.5, Input impedance: 50 Ohms, Rated power: 30 dBm, Use feeder: 1.13mm wire length 150MM, Antenna interface: IPEX interface
Ask Latest Price & Details
GSM Module

GSM Module
  • Dual frequency 900 / 1800MHz
  • Size 24 * 24 * 3mm
  • Supply voltage range 3.4 ~ 4.4V
  • Operating temperature range -40 ° C ~ + 85 ° C
Easy interface with microcontrollerPC for Calling, SMS, Remote Control, Data Logging, Alarm etc applications. GPRS multi-slot class 1210, GPRS mobile station class B, meet GSM 22 + standards,
View Complete Details
Ask Latest Price & Details
Resistive Touch Screen

Resistive Touch Screen
  • overall dimensions 2.2" x 2.75" (55mm x 70mm)
Connect to any MCU and decode touch co-ordinates, This resistive touch screen can be used with a stylus or fingertip and is easy to use with a microcontroller. You can put it over a paper overlay for a touch control panel or attach it to an LCD to DIY a touch-activated display.
Ask Latest Price & Details
Zif Socket

Zif Socket
Converts standard SOIC, 8 pin ICs to DIP package for easy programming. Converts standard SOIC, 8 pin ICs to DIP package for easy programming. SOP8 to DIP8 adapter, SOIC8 to DIP8 adapter
Ask Latest Price & Details
Mechanical Platform Scale

Mechanical Platform Scale
Mechanical Platform with Loadcell, Weighing Scale application platform with 40 KG Loadcell, Mechanical assembly ready to be used as weighing scale applications. If you do not have circuit to process the data from load cells, You can use our Amplifier Board which has simple serial data output.
Ask Latest Price & Details
Flip Lock Pin

Flip Lock Pin
Sunrom Electronics & Sunrom Technologies are two companies, that are the foremost online e-commerce stores since 2004, providing innovative embedded systems, components & services. Our aim is to empower you to Make In India. We work closely with electronics manufacturing companies & individuals to understand & solve the challenges faced during production. We do not just sell things, We use them ourselves in our products, and provide you with high quality tested components for trouble free experience.
Ask Latest Price & Details
SMD Rectifier

SMD Rectifier
Internally 4x Diodes in bridge configuration, useful in AC-DC conversion or DC polarity correction for operation upto 1000V at 1A. A diode bridge is an arrangement of four (or more) diodes in a bridge circuit configuration that provides the same polarity of output for either polarity of input.
Ask Latest Price & Details
Memory Card Socket

Memory Card Socket
Micro SD Memory Card Socket, PCB Mount, Push to insert, push again to eject Thanks to mobile revolution, today Micro SD memory cards are available at very low cost(for example a Micro SD 2 GB card at around 200- INR or $4 USD) so they make ideal choice in embedded projects for data storage and retrieval. More over cards upto 32 GB are also available easily. Many projects like data logger, audio playback etc can be developed.
Ask Latest Price & Details
Touchscreen

Touchscreen
  • overall dimensions 2.2" x 2.75" (55mm x 70mm)
Connect to any MCU and decode touch co-ordinates, This resistive touch screen can be used with a stylus or fingertip and is easy to use with a microcontroller. You can put it over a paper overlay for a touch control panel or attach it to an LCD to DIY a touch-activated display.
Ask Latest Price & Details
Rgb LED

Rgb LED
  • Emitting Color Red, Green and Blue
  • Voltage Rated 3V-5V
Three Colors in single package, RGB LED contains all three colors Red, Green, Blue. These 5mm size LEDs have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors. So any combination of color can be generated.
Ask Latest Price & Details
Weighing Cell

Weighing Cell
  • Operating Temperature -20 °C to +65 °C
  • Suggested Platform Size 350 x 350 mm
  • Temperature Effect on Zero 0.017% Full Scale / 10 °C
  • Temperature Effect on Span 0.014% Full Scale / 10 °C
A load cell is a transducer that is used to convert a force into electrical signal. The most common use of this sensor is in weighing machine. Every weighing machine which shows weight has a loadcell as sensing element. This conversion is indirect and happens in two stages. Through a mechanical arrangement, the force being sensed deforms a strain gauge. The strain gauge measures the deformation (strain) as an electrical signal, because the strain changes the effective electrical resistance of the wire. A load cell usually consists of four strain gauges in a Wheatstone bridge configuration. Load cells of one strain gauge (quarter bridge) or two strain gauges (half bridge) are also available. The electrical signal output is typically in the order of a few millivolts and requires amplification by an instrumentation amplifier before it can be used. The output of the transducer is plugged into an algorithm to calculate the force applied to the transducer. Load cells are used in several types of measuring instruments such as weighing scales, universal testing machines.
View Complete Details
Ask Latest Price & Details
Mini Limit Switches

Mini Limit Switches

Limit switch also know as micro switch. In 3D Printing, RepRap, CNC, Automation, these switches are used as End Stops.
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.