Our Products
Flush Doors
2 Products availablePlywood
2 Products availableWood Boards
2 Products availableHomogenizer
1 Products availableTesting Equipments
1 Products availablePipe Tees
1 Products availableCleaning Wipes & Liquids
1 Products availableOur offered Product range includes Wooden Laminated Doors, Wooden Flush Doors 02, Wooden Flush Doors, Wooden Flush Doors 01 and Wooden Flush Doors 03.
We are reckoned Manufacturer & Supplier of Wooden Laminated Doors from Gujarat, India. The designing, furnishing and finishing of these Doors are accomplished by our pool of diligent professionals. As a result of which, durability and high strength are guaranteed. All you need is to place orders with us, timely deliveries of the same are our prime concern. For reasonable prices, trust us!
We manufacture an exciting variety of Wooden Flush Doors that is customized as per the size of door openings provided by architects and Interior Designers. Our Wooden Flush Doors are incorporated with Mortise Lock positions, opening for Glazing and Ventilation as per client specifications. Our Wooden Flush Doors come with a certification from Bureau of Indian Standards for their quality [IS: 2202(Part- I) FOR WOODEN FLUSHDOOR SHUTTERS (SOLID CORE TYPE)].
Material of Construction :
Our Wooden Flush Doors are Aamous For :
|
|
Our Wooden Flush Doors are Widely Used in :
|
|
Technical Specifications
Test | Unit | Requirement of IS:2202 BN type | Test Result |
---|---|---|---|
Length | mm | ± 5 mm | +3 mm |
Width | mm | ± 5 mm | +2 mm |
Thickness | mm | ± 1mm | ± 05 mm |
Squareness | mm | 1 mm | 0.5 mm |
General Flatness | mm | Not Exceed 6 mm | Not Exceed 3mm |
Local Plainness | mm | Not more than 0.5 mm | Not more than 0.25 mm |
Impact indention | mm | Not more than 0.2 mm | Not more than 0.15 mm |
Flexural Test | mm | Max deflection not more than 5 mm | Max deflection not more than 3 mm |
Edge Loading Test | mm | Max deflection not more than 5 mm & Residual deflection not more than 0.5 mm | Max deflection not more than 3 mm & Residual deflection not more than 0.3 mm |
Shock Resistance | After 25 blow | After 35 blow | |
5 impact both side | 10 impact both side | ||
Bucking Test | Max deflection not more than 50 mm & Residual deflection not more than 5 mm | Max deflection not more than 20 mm & Residual deflection not more than 2 mm | |
Slamming Test | 50 successive impact not any visible damage | 60 successive impact not any visible damage | |
Misused Test | Pass | Excellent | |
End Immersion Test | No delamination in 8 cycle | No delamination in 10 cycle | |
Knife Test | Pass | Excellent | |
Glue Adhesion Test | Pass | Excellent | |
Screw Withdrawal Test | N | Not less than 1000 N | Always more than 1500 N |