Our Products
Cutting Machine
2 Products availableMedical Equipment & Supplies
2 Products availableSealing & Strapping Machines
1 Products availablePouch Packaging Machine
1 Products availablePowder Mixers
1 Products availableBatch Mixers
1 Products availableElectric Cutting Tools
1 Products availablePharmaceutical Machines
1 Products availableIndustrial & Engineering Products
1 Products availableFruit And Vegetable Processing Machine
1 Products availableOur offered Product range includes Liquid Mixer, pedal sealer, liquid mixers, Drum Mixer and Handa Mixer.
Heated chambers are used for a variety of industrial applications, including drying, baking components, parts or final products. It can be used for large or small volume applications, in batches and operated at a variety of temperature ranges, sizes and configurations.
12 Trays | 24 Trays | 48 Trays | 60 Trays | |
---|---|---|---|---|
Motor | 0.5 HP Single Phase:1 No. | 0.5 HP 3 Phase : 1 No. | 1 HP 3 Phase : 2 Nos. | 1 HP 3 Phase : 2 Nos. |
Heater | 0.75 kw : 6 Nos. | 1 kw : 9 Nos. | 1/1.5 kw : 9 Nos. | 1/ 1.5 kw : 12 Nos. |
Electrical load | 5 kw | 8.5 kw | 13.5 to 19.5 kw | 19.5 kw to 28.5 kw |
This machine is used for perfect mixing of liquid with powder and or other liquid ingredients. It consists of a cylindrical tank with a central outlet. The mixing is done by using a stirrer operated with the help of a specialized hollow motor. Stirrer can be easily adjusted according to the product used.
1. Products present in the mixing tank can be heated as per requirment by providing double jacket.
2. Tank of required capacity can be made as per customer needs.
Heated chambers are used for a variety of industrial applications, including drying, baking components, parts or final products. It can be used for large or small volume applications, in batches and operated at a variety of temperature ranges, sizes and configurations. The Trays within the heated oven chamber cab be rotated to allow uniform heat distribution for efficient heating/drying/rosting of the product.
This machine is used for sealing laminated pouches manually. It is operated using a pedal. After the product is filled in the pouch, it is placed between the sealers and the pedal is pressed which ultimately heat seals the pouch.
This machine is used for sealing laminated pouches manually. It is operated using a pedal. After the product is filled in the pouch, it is placed between the sealers and the pedal is pressed which ultimately heat seals the pouch.
This is a blower attached sieving machine. The cleaning is done with the help of an air column of high pressure wind stream pumped by a blower mounted on its base simultaneously the tilted sieve which when operated moves in a to and fro motion using a V-belt, throwing aside the useful product dust and other unwanted components. The product automatically filters down the sieve and into the tray beneath it. The fast blowing wind takes away the dust, dirt and other foreign materials that may contaminate the product during manufacturing process. The product is then collected from the outlet. It is used for cleaning supari, imli, pulses.
The drum of the mixer rotates in both clockwise and anti-clockwise direction. The material inside the drum moves rapidly to allow complete mixing. The blades fitted inside the drum helps in the mixing process.
Features :-
This machine is usedfor coating of spices/silver/perfume on products. The drum size can vary as per requirment. The machine can also be used for mixing of granule items with other ingredients.
Features:-
1.Drum of the mixer can be made out of food grade stainless steel or copper according to cutomer needs.2.RPM:18-24
Powder items like spices, flour, maida, katha are used. This machine is ideally used for powder separation by using interchangeable S.S Sieve, it works on the principle of vertical vibration. A specially designed vibratory motor is used . All product contact parts are made out of food grade stainless steel. It is very easy to disassemble for cleaning/sterilizing. An outlet is provided on the side of the machine to collect the discharge after sieving is done. Body can be made in MS/SS as per customer needs.
The drum of the mixer is in the shape of a cone. The drum rotates in both clockwise and anticlockwise direction to bring the material up and down for perfect mixing.
Features :-
1. The drum of the mixer is fully made out of food grade stainless steel.
2. RPM:18 24
This is a cardamom (Elaichi) peeling machine with an advantage that it has a sieve attached to it. The machine works in two stages. In the first stage the elaichi is passed through the chaki which peels the elaichi. In the second stage the sieving machine separates the seeds and it is discharged from the outlet. It separates the pod, dust, dirt and other foreign materials from the seeds.
This mixer has a horizontal U shape tank and is used for mixing dry and wet materials in order to get a perfect blend of any kind. Mixing is carried out efficiently by ribbon type blades which are fixed on a shaft passing along the axis of the tank to ensure that all material of even the smallest proportions are distributed in the total mass. Teflon seal at both ends of the shaft to prevent lubricants from entering the mixing chamber.
Features :-
1. Outlet Central Bottom outlet.2. Tank of required capacity can be made as per customer needs.3. Product contact parts are made out of SS 304 highly polished to avoid contamination.
It is a highly specialized machine used for removing seeds from dates (Khajoor).
Can be made in Mild Steel or Stainless Steel as per customer requirement
This machine is used for cutting supari, amla, dates, dalia etc. to uniform size as per requirement and removes dust and other unwanted materials simultaneously. It works in two stages. In the first stages it cuts the products. It works in two stages. In the first stage it cuts the product. It renders a high quality cutting and enhanced output capacity approximately 250-300 kg/hr for 15 model and 600-700 kg/hr for 30 model at a maximum wastage of 4 to 5%. 15 model has 6 blades out of which 4 moves and 2 remain fixed. 30 model has 12 blades out of which 8 moves and 4 remain fixed. Blades used in the cutter are specially treated and hardened to get proper result during cutting process. In the second stage the sieving is done. The sifter has a tilted sieve which when operated moves in a to and fro motion using a V-belt, throwing aside the useful product from dust and other unwanted components. The product automatically filters down the sieve and into the tray beneath it. The product is then collected from the outlet.
15″ model | 30″ model | |
---|---|---|
Motor | 5 HP 3 phase | 10 HP 3 phase |
Size | 64″x 42″x 66″ | 74″x 50″x 68″ |
Output | 250 – 350 kg/hr | 600 – 800 kg/hr |
This is a sifter machine used to separate the useful stock from any kind of unwanted impurity and waste. The sifter has a tilted sieve which when operated moves in a to and fro motion using a V-belt, throwing aside the useful product from dust and other unwanted components.The product automatically filters down the sieve and into the tray beneath it. Sieving net is made of stainless steel to avoid any rusting by the moisture of stock. The product is then collected from the outlet. It is used for both sieving and grading.
This is a continuous horizontal sealing machine used for manually heat sealing laminated pouches. Sealing speed 1-12 meter per minute. It is mounted on wheels for easy movement.
Big | Small | |
---|---|---|
Power | 1.25 KW | 2 KW |
Sealing Area | 8mm-12mm | 8mm-12mm |
This machine is used for cutting supari, amla, dates, dalia etc. to uniform size as per requirement. It renders a high quality cutting and enhanced output capacity approximately 250-300 kg/hr for 15 model and 600-700 kg/hr for 30 model at a maximum wastage of 4% to 8%. 15 model has 6 blades out of which 4 moves and 2 remain fixed. 30 model has 12 blades out of which 8 moves and 4 remain fixed. Blades used in the cutter are specially treated and hardened to get proper result during cutting proces.
15″ model | 30″ model | |
---|---|---|
Motor | 5 HP 3 phase | 10 HP 3 phase |
Size | 28″ x 42″ x 66″ | 37″ x 50″ x 68″ |
Output | 250-300 kg/hr | 600-700 kg/hr |
Suitable for manually filling granule/power items in pouches/tins. The cups fitted in the disc ensure accurate and uniform filling of the material. The machine can be controlled through a foot stopper if required. All the product contact parts sre made of stainless steel.