Sunil Indutrial Corporation

BBD Bag, Kolkata, West Bengal

Ladder in wooden& alluminum in all size

The delivery pressure of our hose is remarkably stable inspite of changes in flow rate temperature and other conditions. They are rugged in design and are very safe both of which are important aspects for superior performance.It is hazardous to interchange acetylene hose or use other types of welding hose for LPG. LPG being Liquefied Petroleum Gas has corrosive action which dissolves interior of lining & this mixture would retard flame temperature and produce inferior cut. Also in extreme cases it could lead to explosion & serious fire.

Sunshine Welding Cables are light in weight and heavy duty in current. Our heavy duty welding cables are technically sound, thus have guaranteed life. They can easily work at high temperature and save around 40 % operating cost. We have carved a niche as one of the overriding heavy duty welding cables suppliers in India.

Rubbers of Welding Cable are available in two types of Insulation

H.O.F.R. (Heat, Oil and Flame Retardant) Welding Cables - Copper/Aluminium Conductor.

T.R.S. (Tough Rubber Sheathed) General Service Welding Cables - Copper/Aluminium Conductor.

Features:

• ISI Approved Cables
• Highly abrasion resistant.
• Long working life
• Less heat build up
• Ozone resistant

Sunshinedesigned gas pre- heater is used for heating the CO2 gas to the boiling point before it enters into the Regulator .It is most efficiently designed which improve the affiance than other conventional heaters. Sunshine heater is so designed to sufficient cooling the cylinder valve and integrated in piping system.

Gas Cutting Machine helps a Fabricator in cutting production costs and increases efficiency.It works on single phase supply and is operated by H.P. single phase motor. Power is fed through a Forward-Reverse toggle Switch Gas Cutting Machine helps a Fabricator in cutting production costs and increases efficiency.It works on single phase supply and is operated by H.P. single phase motor. Power is fed through a Forward-Reverse toggle Switch

Electrode should be kept in a dry, well ventilated store under heated condition where the humidity is below general level. The efficiency of welding electrode can be seriously injured if the coating of electrode is allowed to get damp due to atmospheric moisture. Sunshine drying oven ensure longer life of electrode and ensure that demand of customer is fulfilled.

Semi Insulated:

SN-400 holder have 4 copper strip with DMC Heat proof body suitable for welding upto 3.15mm electrode

Electrode Holders are available in 10 Nos Box Packing.

We are offering Chipping Hammer with Powder Coating. These tools are designed to be easy to maintain thereby keeping downtime to a minimum. Used for chipping and fettling metal in forging, casting and fabrication industries.

high pressure of the gas in the cylinder is reduced to the required working pressure by an adjusting screw. It is available with 2 pressure gauges as well as with only one pressure gauge to show the inlet pressure.Suitable for all industrial; purposes i.e welding, cutting, heating, brazing.Constant gas flowAccurate pressure settingNo gas leakage

• Sunshine Earth Clamp are available in 400 and 600 amp
• Brass jaw and Copper mesh

• In 400 Amp Clamp, 2 nos singlesmall box packing
• In 600 Amp Clamp, 1 nos single small box packing

Welders Goggles are worn over the eyes and held in place by a head band.They are used for protecting the eyes and eye sockets from flying particles and injurious radiations.

images Gumboots are used in building, construction, cement, electro plating and many other industries.the boots are also suitable and advisable to people going out in rain, snow or it can even be worn with school uniform.Safety optional extra are available in the form of steel caps and resistant to oils, fats, blood, chemicals and acids.

Gumboots are used in building, construction, cement, electro plating and many other industries.the boots are also suitable and advisable to people going out in rain, snow or it can even be worn with school uniform.Safety optional extra are available in the form of steel caps and resistant to oils, fats, blood, chemicals and acids.

It is availablefor regulator and cutting torchIt help to prevent backfire

Brand: Weldstrong

The nozzle is the Business End of Gs Cutting :Using low quality or damaged nozzles can be compared to cutting clot with blunt scissors. Magnificent, expensive cutting machines cannot perform if poor quality cutting nozzles are used. We strive continually to improve nozzle design to increase efficiency, to lengthen working life, to affect gas cost saving and increase cutting speed.

Features:

• Gas: LPG acetylene
• Material: copper
• Body: Forged Body.

Sunshine
All sizes are available in sunshine nozzle.

We are engaged in offering a superior range of quality MIG/TIG Torches and their Spares. Our vendors manufacture these products using quality raw material and maintain stringent supervision of the quality. These spares are designed to meet the welding requirements of varied industrial fabrication processes. We offer these at are available at very competitive prices to our clients.

The greatest advantage of Aquasol water-soluble purge dams is that they can be placed in close proximity to a weld zone, then dissolved with water or steam introduced through the pipe. We recommend the dams be placed 6 to 8 inches on each side of the root gap. This is in comparison to conventional dams which are placed 10-20 feet from the weld area. An alternative to traditional cardboard purging systems, Aquasol water-soluble paper and tape are extremely easy to use and provide a safe work environment for welders. Soluble paper is made of Sodium Carboxy Methyl Cellulose and wooden pulp that dissolves rapidly and completely in most liquids including water. After welding is complete, Aquasol purge dams can be effortlessly dissolved and flushed out of the system with water when hydro testing; leaving no residue in the pipeline.

Leveraging on our long experience in the industry, we offer quality Ceramic Cups, collets and collet body for various industrial usages. Our Ceramic Cups, collets and collet body are made with qualitative raw material.

It is available in 1.6mm, 2mm, 2.4mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm

Flow Meter is available for Argon andCO2.It is used with regulator or pipeline distribution installation

Features:

• Accurate readings
• Durable finish standards
• Dimensionally accurate
• Easy to operate

Safety Shoe is light in weight and provide maximum protection against the major and minor injuries.High grade raw material are used which provide high strength to the finished structure. Feature Upper LeatherSteel toe Heavy Duty Steel ToeSole- Direct Injection Polyurethane(P.U) soleLinning-Orange LinningLace: Black & Orange Nylon lacesHeat Resistance ability to withstand temperature up to 120 Deg for 1 minute

leather shoe with pu sole

sunshine

sunshine safety shoe is light in weight and provide maximum protection against the major and minor injuries.high grade raw material are used which provide high strength to the finished structure.

feature

• upper leather
• steel toe heavy duty steel toe
• sole- direct injection polyurethane(p.u) sole
• linning-orange linning
• lace: black & orange nylon laces
• heat resistance ability to withstand temperature up to 120 deg for 1 minute
• excellent sole which provide protection frm slip or wet work surfaces
• slip resistance on steel floor with glycerol
• steel eyelets provided for anti rust and durabilty
• in sole non woven storable cloth, flexible and better quality for water absorption and deabsorption
• optional: antistatic sole can be provided on request

.

We are instrumental in offering a comprehensive range of Mig Welding Spares, which includes precision engineered mig welding torches & torch spares. Our range is imported from trusted vendors across the globe.

Tig/Mig Rod & Wires for Aluminium, SS and Low Alloy Steel

Electrode should be kept in a dry, well ventilated store under heated condition where the humidity is below general level. The efficiency of welding electrode can be seriously injured if the coating of electrode is allowed to get damp due to atmospheric moisture.

brand: weldstrong

• manual cutting blow pipe is a well balanced band type capable of cutting mild steel upto a thickness of 300 mm

• it can be used either with dissolved acetylene or with low pressure generated acetylene with a suitable nozzle.

• it can also be used with l.p.g using our two pieces l.p.g nozzles

• a standard version is 450mm in length having 90 deg angle head

• we recommend our two seat nozzle for longevity and safety.

brand : sunshine

• it is designed to cut upto 300mm thick mild steel
• injector type cutter can be used with the dissolved acetylene cylender or with low pressure generated acetylene with a suitable nozzle.
• standard version is 450mm/90 deg.also vaiable in larger length and head angles against specific orders

.

images Manufacturing and supplying nose masks such as industrial nose masks, nose safety masks and nose filter masks. Also offering dust masks, dust face masks, disposable dust masks, colored dust masks and respirators.

The case is made up of high quality antiflaming ABS material, good in insulation.It has many advantages such as waterproof , shield from electricshock and corrosion-resisting.Energy-efficientSmall and light. It can be moved easily.HF Arc-starting and strong welding permeability.Be satisfied requirements of welding process. Be able to weld carbon steel, stainless steel, copper

Made of : Very Soft Low Density Material.