Product / Services
Post Buy Requirement
SE

Sumitron Exports Private Limited
Rohini, Delhi

Write a Review
Call 08069182177 Ext. 477

Our Products

  1. Soldering Equipment 13 Products available
  2. Lubricants 4 Products available
  3. Epoxy Coatings 3 Products available
  4. Soldering Machine 3 Products available
  5. Soldering Machines & Accessories 3 Products available

  6. Cleaning Chemicals

    2 Products available

  7. Electric Cutting Tools

    2 Products available

  8. Measuring Instruments & Equipment

    2 Products available

  9. Centrifuge Machine

    1 Products available

  10. Router

    1 Products available
  11. Others Products 50 Products available

Other Products / Services

We are leaders in the market for providing best range of Electrolube TBS Thermal Management System, Electrolube PUC Thermal Management System, soldering robot, Tsutsumi IMPACIII TS-711 Controller and Easy Cut Depaneliser

Electrolube FLU Fluxclene Cleaning Chemical

Electrolube FLU Fluxclene Cleaning Chemical
This ozone free cleaning chemical easily cleans the residual flux from soldering operation, keeping the circuit traces neat and clean. The chemical dries fast and cleans efficiently compared to traditional CFC based solvents, easily giving MIL-STD cleanliness, without leaving a film.It is compatible for use on plastics, seals, PCB components, rubbers and elastomers and is formulated to remove all types of rosin (types R, RA and RMA), no-clean, water soluble and synthetic (type SA) flux.
View Complete Details
Ask Latest Price & Details
Electrolube TBS Thermal Management System

Electrolube TBS Thermal Management System

The Thermal Bonding Compound (TBS) consist of two metal oxide based epoxy solvents, which on mixing and application showcase excellent bonding and thermal conductivity characteristics while staying electrically insulating.It is specifically designed for applications requiring special thermal conductivity qualities for instance in manufacture of heat sink assemblies. The solution has high bond strength and excellent adhesion, therefore serves as an alternative to welding and brazing processes.The easy to prepare mixture cures efficiently at room temperature and consists of minute solid glass spheres to ensure uniform thickness throughout application area.
View Complete Details
Ask Latest Price & Details
Electrolube PUC Thermal Management System

Electrolube PUC Thermal Management System

This Polyurethane Coating (PUC) is designed to form a stiff and flexible protection against harsh environmental and physical conditions toEven when cured at room temperature the coating shows improved resistance solvents including acid and alkalis. It may also be soldered through, allowing easy repairing in a specific area on board without damaging the adjacent circuitry. The cured coating can be easily removed with solvents such as Electrolube CCRG.
View Complete Details
Ask Latest Price & Details
Tsutsumi MINIMAX II TX 821 Soldering Robot

Tsutsumi MINIMAX II TX 821 Soldering Robot
The Tsutsumi Minimax II TX-821 is a soldering robot used for point and slide soldering. The X, Y, and Z axis have 300X200X100 mm range of operation. It has an AC servo motor which is virtually maintenance free. It has a four axis tooling system. Every axis has a ball screw for precise operation. A low speed movement of 0.1mmsec can be set. A low speed ensures good stable slide soldering and also reduces the tact time. It has a 4-axis PTP control. It also has simultaneous 3-axis linear and circular interpolation motion. It has MAXEED TS-621 controller. It enables registering of up to 48 soldering programs. 99 soldering conditions can be added. The computer software TSCOWin manages the data required for soldering on a computer. It has a large data storage capacity, up to 6000 program steps and 3000 positions of points can be stored.
View Complete Details
Ask Latest Price & Details
Tsutsumi Mcross TX m444A 4 Axis Soldering Robot

Tsutsumi Mcross TX M444A 4 Axis Soldering Robot
The Tsutsumi miCross TX- m444 is a soldering robot used for point and slide soldering. The X, Y, and Z axis have 400X400X100 mm range of operation, which corresponds to 200X200X100 mm range of motion. The base of the robot is made of aluminum to give it good rigidity. It has servo motor and a ball screw which help in achieving accurate repetitions and improving the carrying capacity. It has a simultaneous 4-axis PTP control. It also has simultaneous 3-axis PTP and CP functions. It has MAXEED TS-621controller which is used to check and adjust feeding amount, feed rate, and temperature of soldering wire.
View Complete Details
Ask Latest Price & Details
BGA Rework Station FR-811

BGA Rework Station FR-811
Possible to make full-scale thermal profiles with 6-zone hot air and a bottom heater. Possible to measure and record temperature of components and PWB with type K thermocouple. The dedicated software to link a station and a computer for easy and quick settings. Easy data transfer through an USB cable
View Complete Details
Ask Latest Price & Details
Power Torque Electric Screwdrivers

Power Torque Electric Screwdrivers
  • Material Plastic, Alloy steel,
  • Warranty 1 Year, 2 Year
  • Feature Fully Automatic shutoff, Quality Tasted, High strength
  • Color Silver, Grey, Black
  • Weight 50-100 Gm, 100-150 Gm, 150-200 Gm
  • Driven Type Electricity
View Complete Details
Ask Latest Price & Details
soldering robot

Soldering Robot
  • Power requirements Ac 100 V = or - 10% 50 / 60 Hz 1.0 Kva
  • Air requirement 0.40.5 Mpa5 kgf / c Dry air
  • Drive method AC servomotor, Ball screw drive
  • Movement method, No. of control axis PTP, Total 4-axis control ( 3-axis simultaneous linear and circular interpolation
  • Ambient temp. Humidity, Environment 040, Non-condensing, no corrosive gas and no significant dust
View Complete Details
Ask Latest Price & Details
Wire Cutters

Wire Cutters
  • Application Wire Cutting
  • Color Brown, Grey, LIght White, Metallic, White, Red
  • Handle Material Plastic
  • Material Mild Steel
View Complete Details
Ask Latest Price & Details
Tsutsumi IMPACIII TS-711 Controller

Tsutsumi IMPACIII TS-711 Controller

The Tsutsumi IMPACIII TS-711 is an automatic controller for soldering. It has a 32 bit micro-computer for controls. It reads and writes data using the RS-323C communication port. It enables registering of up to 31 soldering conditions. These conditions check for the length and end of the soldering wire, clogging of solder, temperature of soldering iron tip, and so on. In case of any problem, the controller stops the soldering operation and sends the error message to the output device. The solder length to be fed can be set from 0 to 99.9mm or 0 to 999mm. The solder feeding speed can be set from 0 to 99.9mmsec. The soldering time can be set from 0 to 9.99sec or 0 to 999.9sec. Optionally use the computer software TSCOWin to manage the data required for soldering on a computer.
View Complete Details
Ask Latest Price & Details
Easy Cut Depaneliser

Easy Cut Depaneliser
  • Dimensions 355 mm , 190 mm , 670 mm
  • Weight 20 kg
  • Connection 115 / 220 Volt
  • Thickness PCB 1.0 mm - 3.2 mm
  • Nicked channel 0.3 mm to 0.8 mm
  • Angle of Nicked Channel 25 to 30 deg
View Complete Details
Ask Latest Price & Details
Hakko FR 870 Rework Station

Hakko FR 870 Rework Station

Hakko FR 870 is an infrared board preheater that comes with 6 infrared halogen lamps with a power consumption of 460 W. FR 870 is used to raise the temperature of the PCB. A heated PCB allows the components to be soldered more easily with good results. This device is suitable in areas where there is medium to high mass board assemblies and that can sink a significant amount of energy. This device has a unique power mode that allows you to set the output manually or thermocouple mode. The setting range for Power mode is 0-100%, whereas the setting range for TC modem is 50 200 degree Celsius
View Complete Details
Ask Latest Price & Details
Hakko 882 heating gun Soldering Accessories

Hakko 882 Heating Gun Soldering Accessories
Hakko 882 heating gun is a portable heating blower, which is easy to handle. This device is not dependent on an external soldering station. It has a power consumption of 800W and comes in three models 880, 881, and 882. It is designed to be used in applications where heating operations including drying paint, processing shrink films and shrink tubing, drying resin putty for sheet metal, repairing automobile urethane bumpers, applying long-length floor materials, and vinyl moldings are performed. The various models available in this family can reach up to a temperature of 400 Degree Celsius450 Degree Celsius. You can choose amongst these models based on your requirement and the work load.
View Complete Details
Ask Latest Price & Details
Hakko 96 Solder Pot

Hakko 96 Solder Pot

Hakko 96 is a soldering pot. It has a lead free ESD safe soldering cord and has a power consumption of 200W. It has a temperature range of 100 to 450 Degree Celsius This pot can store large-capacity solder bath and can hold large amount of solder. This pot helps maintain the solder temperature throughout continuous operations. The stainless steel body of this pot offers greater durability, whereas the solder overflow prevention rim around the pot prevents solder overflow and offers greater safety. In addition, the pot also comes with a waste collector that offers operating ease and efficiency.
View Complete Details
Ask Latest Price & Details
Hakko Sppon Desoldering Equipment

Hakko Sppon Desoldering Equipment

Hakko Sppon is a light weighted and economically designed desoldering tool. Though it is light weighted, it is powerful enough for a heavy duty desoldering procedure. This tool comes with a unqiue cleaning shaft that allows easy cleaning of the nozzle. The nozzles are easily replaceable and can be chosen from the Hakko series. The Hakko Sppon comes in five different models that have different absorption capacities, namely 18 (absorption capacity: 12cm3(12cc)), 18G (absorption capacity: 12cm3 (12cc) w Guard), 20 (absorption capacity: 20cm3(20cc)), 20 G (absorption capacity: 20cm3 (20cc) w Guard), and DS01P (absorption capacity: 28cm3(28cc)).
View Complete Details
Ask Latest Price & Details
Hakko Fr-701 Rework Station

Hakko Fr-701 Rework Station

Hakko 701 is a soldering and desoldering system. It consists of a ceramic heating element and has a temperature range of 380 Degree Celsius to 480 Degree Celsius. It is a perfect option for dual mode operations. Due to its dual mode it utilizes minimum bench space so that you can use your bench space efficiently without working for the size of this equipment. You can also combine this system with N2 system to reduce soldering defects. You can easily replace nozzles in this device and use the ones that well known in the Hakko series.
View Complete Details
Ask Latest Price & Details
Hakko FG 102 Thermometer Soldering Accessories

Hakko FG 102 Thermometer Soldering Accessories
The HAKKO FG 102 is a battery operated thermometer.It is used to measure the temperature of soldering tips.It has a compact design with good portability.It enables high precision temperature measurement free of human and transcription errors. Standardized measurement of temperature is possible.It measures temperature between 0 to 700C.It enables very easy management and transfer of the recorded temperature data to computers.It has a power saving mode which ensures longer battery life. It automatically indicates the calibration date for the thermometer.
View Complete Details
Ask Latest Price & Details
Hakko 394 Soldering Accessories

Hakko 394 Soldering Accessories
he HAKKO 394 is a battery operated pick-up tool. It has a built-in vacuum pump for suction. It is best suited to pick up small micro components of PCBs, ICs, such as resistors, capacitors, and so on. It has continuous suction to ensure smooth handling of the micro components. It has interchangeable accessories like pads and nozzles for different surface areas of components. It can be operated with various batteries, such as, Alkaline, Nickel-Cadmium or Nickel-Hydrogen batteries. Two AAA size batteries power the pump. It is made of antistatic material to ensure protection of micro components.
View Complete Details
Ask Latest Price & Details
Hakko FR 872 Soldering Accessories

Hakko FR 872 Soldering Accessories
The HAKKO FR 872 is a preheater for large boards up to 330mm x 250mm.It has four heating zones. Each zone can be activated or deactivated individually. Only the activated areas are heated. This makes working on smaller boards and reworking on some smaller areas on large boards very comfortable. It has infrared carbon filaments to ensure efficient heating.It has various modes to ensure easy control of the heating temperature. It has adjustable guides that enable working with boards of different sizes.
View Complete Details
Ask Latest Price & Details
Hakko FM 2030 Soldering Accessories

Hakko FM 2030 Soldering Accessories
The HAKKO FM 2030 is a 140W composite soldering iron. It is used exclusively with HAKKO FM-206, a soldering station which allows multiple operations. It has a built-in heater. It has high thermal conductivity. Temperature range is between 200 to 500C.It is ideal for soldering of large components such as, power-supply boards, heat sinks, shield cases and coaxial cables. It can also be used for soldering precision micro components such as, multilayer boards. It can be used with 16 types of replaceable tips of varied shapes for soldering. Large range of tips enables soldering in a variety of applications.
View Complete Details
Ask Latest Price & Details
Hakko FT 710 Cleaner Soldering Accessories

Hakko FT 710 Cleaner Soldering Accessories
Hakko FT 710 Cleaner allows you to clean your soldering equipment efficiently. The encapsulated housing of FT 710 prevents the iron tip from splashing, which is significant cause of solder failure. In addition, it also prevents the soldering paste from entering in to the driver. For this, it uses two types of brushes for solder cleaning one is made of Resin (removes solder partially) and the other is made of metal (removes solder entirely). The tip temperature drops while cleaning eventually leading to high workability. This device is compatible with various HAKKO soldering irons and tips and is very easy to maintain
View Complete Details
Ask Latest Price & Details
Hakko FG 100 Thermometer Soldering Accessories

Hakko FG 100 Thermometer Soldering Accessories
The HAKKO FG-100 thermometer, which is suitable checking temperature of soldering tip, provides quick and accurate tip temperature of a soldering machine and the solder pot using a fine CA wire sensor. This helps in verification of temperature during the soldering process and is also helpful in calibration purposes. The sensors are disposable, lightweight, easy-to-replace, and have twice the service life when compared to conventional sensors. The thermometer also helps you obtain the maximum temperature reached during the soldering process with the help of the MAX HOLD button. It comes with a large and clear display and features like auto shut off and an indicator for low battery so that you do not get incorrect results.
View Complete Details
Ask Latest Price & Details
Hakko FX 300 Solder Pot

Hakko FX 300 Solder Pot

Hakko FX 300 Solder Pot is a ceramic heating control soldering pot with digital temperature display and offset function. It is analogous and lead-free compatible. FX-300 comes with two pots and has four selectable heating programs (Sn-Pb (TinLead), Sn-Ag-Cu (TinSilverCopper), Sn-Cu (TinCopper), and Sn (Tin)) that allow you to get the desired temperature quickly for the metal being used. A special coating can be made available to you on request that enhances the life of the pot. The unique timer function helps you realize the time since the pot is being used. This helps you judge the time for a quick replacement.
View Complete Details
Ask Latest Price & Details
Hakko FM 206 Rework Station

Hakko FM 206 Rework Station

Hakko FM 206 Rework Station is a 3-port station that enables you to convert the station into soldering, desoldering, and rework stations. These ports are simultaneously powered. Due to this, you can save a lot of bench space. It is a highly customizable rework station, and also comes with an in-built vacuum pump for hot airflow. The Graphic User LCD of this device helps you in easy installation of the device, and also helps in various operations that this rework station can perform. With advanced features, such as Auto shut off, sleep function, passcode protected, and theft prevention you can be rest assured that the station will have long life.
View Complete Details
Ask Latest Price & Details
Hakko FM 203 Rework Station

Hakko FM 203 Rework Station

Hakko FM 203 Rework Station is a dual port soldering station. It has a power consumption of 140W, and has temperature range of 200-450 Degree Celsius. You can attach two soldering irons to this station at the same time. This helps you to use the appropriate iron without having to connect them alternatively. The stations process controls allow you to select the desired soldering temperature without changing the iron tip. The station comes with features, such as power thermal recovery, sleep function, and auto power shut off. In addition, various replaceable tips and nozzles can be attached to the soldering iron.
View Complete Details
Ask Latest Price & Details
Hakko FA 400 Smoke Absorber

Hakko FA 400 Smoke Absorber
Hakko FA 400 is a smoke absorber that removes soldering smoke and fumes in a quick, safe, and an efficient manner. It protects the operator from breathing harmful fumes that might cause headache, dizziness, or eye trouble. FA 400 can be installed horizontally, vertically, or on arm stand based on your requirement. The smoke absorber contains the standard activated carbon filter that absorbs up to 80% of fumes and is ESD safe. FA 400 has a power consumption of 19W (220V), 50Hz and has an airflow of 0.4mmin for horizontal installation and an airflow of 10mmin for normal installation.
View Complete Details
Ask Latest Price & Details
Hakko FR 300 Desoldering Equipment

Hakko FR 300 Desoldering Equipment

The HAKKO FR 300 is a very compact desoldering tool.It is used to remove solders. Good heat recovery rate enables lead free desoldering.It has power ONOFF switch on the handle.It has an excellent nozzle replacement system. Cleaning and replacing the nozzle is possible even when the unit is hot. It has preset temperature settings. Adjustable dial on the handle enables easy temperature control.LED indicators are used to indicate if heating is in progress. LED also used to indicate if the tool is idling at the preset temperature setting. It has a holder for the nozzle. This ensures accident free operation while working with hot parts of the tool.
View Complete Details
Ask Latest Price & Details
Hakko 950 Tweezer Soldering Accessories

Hakko 950 Tweezer Soldering Accessories
Hakko 950 is an SMD tweezer that is designed to withstand various stations. The device consumes 50W of power and has a temperature range of 200-400 Degree Celsius. It is designed to deliver direct heat to components that helps in preventing damage to the surrounding components on dense or crowded boards. The tweezer helps an operator to remove SMD chips and flat packs of up to 25mm. The tips of this tweezer are easily replaceable and can be easily aligned. In addition, it requires very less maintenance. The package of Hakko 950 contains tweezers, a heat resistance pad, and a tip alignment tool.
View Complete Details
Ask Latest Price & Details
Hakko FA 430 Smoke Absorber

Hakko FA 430 Smoke Absorber
Hakko FA 430 is a smoke suction device that removes soldering smoke and fumes in a quick, safe, and an efficient manner. It protects the operator from breathing harmful fumes that might cause headache, dizziness, or eye trouble. This suction device has a powerful suction mechanism that uses ducts and yet it is silent. This device comes with a selectable air volume that allows you to select the amount of air volume that you want to throw out. In addition, this suction device has an automatic filter replacement light that makes your life easy when replacing a filter and ensures optimum performance.
View Complete Details
Ask Latest Price & Details
Hakko FG 101 Thermometer Soldering Accessories

Hakko FG 101 Thermometer Soldering Accessories
Hakko FG 101 is a soldering iron tester that comes handy for the daily maintenance of station type soldering irons. It comes with amazing features that measure Leak Voltage Check, Tip-to-ground resistance, and Tip temperature. These features are very importance to prevent the devices being worked on from any sort of damage and are also important for proper maintenance of station type irons. In addition to these features, the MAX HOLD button allows you to see the maximum temperature reached during a soldering process and also has an AUTO ZERO function to correct the zero point error.
View Complete Details
Ask Latest Price & Details
Hakko FR-810B Rework Station

Hakko FR-810B Rework Station

Hakko FR 810 is a turbine powered digital SMD hot air rework station. It can provide hot air with a temperature of up to 600 Degree Celsius having and having airflow of up to 115Lmin. The right amount of airflow and air temperature can be achieved using the digital controls. This allows it to be used on low density board to high density boards. The rework station has a simple procedure for removing the nozzle and is easily maintainable. You can use conventional nozzles with FR 810 using a conversion adapter. The temperature range for this station is between 50 Degree Celsius to 600 Degree Celsius and the airflow speed ranges from 5 Lmin to 115 Lmin.
View Complete Details
Ask Latest Price & Details
Tsutsumi Feeding UniT TF 621 For Soldering Robot

Tsutsumi Feeding UniT TF 621 For Soldering Robot

The Tsutsumi TF-621 is a feeder unit. It is attached to the soldering robot. Solder wires with diameters from 0.5mm to 1.6mm can be used. The feeder ensures precise feeding of solder wire up to 0.1mm. The feeder is also used to detect clogging of solder. It also detects the end of solder wire. It has a pulse motor drive. Optionally cut-in feeder rollers can be attached. The rollers prevent the flux from scattering.
View Complete Details
Ask Latest Price & Details
Tsutsumi AUTOMATIC SOLDERING UNITS

Tsutsumi AUTOMATIC SOLDERING UNITS

The Tsutsumi TI-652 is a soldering iron. It has a rotary cylinder which controls and ensures smooth vertical motion of the tip. The cylinder uses an S character curve control. This control reduces the scattering of solder ball during operation. It also reduces the up-down motion of the tip, thus reducing the tact time. The iron has a stroke length of 8mm. The Tsutsumi TI-632 is a soldering iron. It has a direct dynamic cylinder .The iron has a stroke length of 15mm. Soldering tips TKN or TKH can be used.Optional accessories improve the performance of the iron. It uses a ceramic heater TH-6-70-100. It uses the thermocouple unit TCA-16. The heater and thermocouple unit must be purchased separately along with the soldering iron. Another optional accessory is the holding arm for the iron. For point soldering, holding arm TR-621 can be used. Optionally, Ruby Nozzle TNZ-3 can be used to precisely supply solder wire to the soldering tips.
View Complete Details
Ask Latest Price & Details
ECOR 4077NA KOKI Reflow System

ECOR 4077NA KOKI Reflow System

The KOKI ECOR 4077NA ECOR 4099NA are reflow systemsovens. It is used in reflow soldering of surface mount electronic components. It circulates heated gases in the heater like a tornado. This is called the Tornado circulation method. This ensures good circulation and less loss of heated air. The power consumption has been reduced by 40%. The oven has a very good sealing system which also reduces the consumption of N2. It has a very good mist collection system. The oven uses convection heating technique to endure uniform heating capacity. It has rail system with adjustable width which ensures that the rails are parallel even under high temperature. The PCBs are transported safely on these rails.
View Complete Details
Ask Latest Price & Details
KOKI Spray Fluxer VIS 350

KOKI Spray Fluxer VIS 350

The KOKI VIS 350 is a spray fluxer used to spray flux from the underside of the PCB. This ensures that the top side of the PCB is not affected by the flux and water mists. It provides an even flux coating. The flux is sprayed from a shorter distance. This reduces the rebound of flux particles thus ensuring good coating efficiency. It results in less wastage of flux material. It has a sub-tank of flux. This allows changing of flux without stopping the machine. It has a LCD monitor where the X and Y dimensions of the spray area can be set. The monitor also displays error messages like flux empty, less air pressure, and so on. It has a pre-heater unit which heats the PCB before spraying the flux. This reduces the adhesion of water vapor to the PCBs by 30%, which ensures better soldering quality. With evaporation of water in the pre-heater, the flux fluidity is improved.
View Complete Details
Ask Latest Price & Details
Hakko 485 Connect Soldering System

Hakko 485 Connect Soldering System
Hakko 485 is soldering system. It is developed for soldering and desoldering components, such as connectors, LCD display, and so on that are mounted on circuit boards. This soldering system controls the flow of solder material, which is controlled by both time and temperature. With this system you can also attach various nozzles from the Hakko series, which are available in different sizes. This system makes your soldering and desoldering cycles automatic and precise. In addition to these features a built-in locator light pinpoints the exact position for component placement, which is very helpful for an operator. After soldering, the solder material that remains in the through hole can be completely removed by the air unit.
View Complete Details
Ask Latest Price & Details
Ambitec GAM 12 SMD Component Counter

Ambitec GAM 12 SMD Component Counter

Fully automatic component counter is ideal for counting chips with great precision and accuracy and simple to operate.It has a count capacity of -99999 to 99999. The presence of internal power backup helps in sustaining system during blackout.Salient features : A material missing protection device from running is provided, reel derailment protection device is provided to counter tapes fall off, easy to adjust tape tension by tighteningor loosening, adjustable speed (speed up or slow down), a drawing type LCD screen is provided to easily set parameters and read data.
View Complete Details
Ask Latest Price & Details
Ambitec GAM 60 60A Solder Paste Mixer

Ambitec GAM 60 60A Solder Paste Mixer
It is a cream solder mixer with high capacity of solder paste mixing.It utilizes step mixing function to prepare optimal viscosity substrate under controlled temperature conditions. It exploits rotationrevolution technique for kneading of solder powder and flux and avoids aeration that can cause solder ball spattering. It takes care of the cold solder paste and brings it to normal temperature in few minutes. Its high capacity kneading process dramatically reduce operation time and contribute to stabilization of material quality as well as increasing yield rates.
View Complete Details
Ask Latest Price & Details
Ambitec GAM 62A Centrifuge Machine

Ambitec GAM 62A Centrifuge Machine
It is a unique energy efficient machine used to expell water and other fluids from moist substances and also sometimes used to separate liquids of different densities by centrifugal action.It is a very versatile centrifuge for applications in industrial applications and is renowned for its high build quality.include well designed durable structure; Universal holder suitable for housing all sorts of plastic tubes.Anti-aeration process no bubbles left in Glue Tube. Enhanced safety mechanism with Emergency stop button to ensure safe operation.Simple and user friendly operation. LED panel for clear countdown display, Audio and light alarms to indicate completion of cycle and Low Maintenance.
View Complete Details
Ask Latest Price & Details
Ebso EASY CUT300 300M PCB Depanelizer Router

Ebso EASY CUT300 300M PCB Depanelizer Router
The EasyCut provides an economical solution for efficient de-penalizationseparation of pre-scored PCBs. The machine has a set of sharp high-speed steel circular blades, each of which is covered with guards to ensure safety of operator. The lower blade is driven by a motor and the upper blade is quick adjustable for exact positioning between the two knives and the work piece. Multi-diameter blades can be easily mounted by removing a threaded holding disk from the main shaft. The available range of PCB depanelizers include the EasyCut300 manual version and EasyCut300M motorized version
View Complete Details
Ask Latest Price & Details
Janome PCB Depaneling Desktop Robot

Janome PCB Depaneling Desktop Robot

The Janome JR2000NERT Series is a depaneling robot. It is used in various operations related to PCBs, for example, manufacturing and cleaning of PCBs. The operations are controlled using very simple software. Customize the software to suit your requirement. The software can save up to 255 programs. The robot consists of a robotic unit, electrically driven router, software, and a kit for collecting dust. The robot has a very sturdy design with its base and column made of aluminum alloy. The robot has a double-check system, which minimizes defects. It has a labyrinth mechanism which does not allow objects such as screws, liquid, and dust to enter the robot. It has an inbuilt sequencer that runs the predefined programs. Display is available in 10 different languages. Measurement units can be switched between mm and inches.
View Complete Details
Ask Latest Price & Details
Ambitec Gam 70 Laser Vision Measurement

Ambitec Gam 70 Laser Vision Measurement

It helps in surveying and inspecting the quality of tin solder on printed circuit boards. It measures the length and thickness of each path and also records the gap between adjacent solders. The recorded data for each PCB is stored automatically in system file and if needed, can be printed as a report.The solder thickness distribution diagrams and control diagrams of X_BAR_R are efficiently recorded by the machine for each product in different production lines.Salient Features include User friendly interface for ease of operation. Laser contact less technology to prevent damage due to contact; Operational modes: Manual & Automatic.Automatic focus adjustments based on PC board thickness.; Full screen display for easy sampling, operation.Real time display of all survey parameters for better quality control and elimination of printing defects such as bridging, location deviation etc.
View Complete Details
Ask Latest Price & Details
Ambitec GAM 30 V CUT PCB Separator

Ambitec GAM 30 V CUT PCB Separator

It is an ideal solution for smooth cutting of printed circuit boards. Its robust design ensures adequate pressure at the cutting edge to prevent damage to electronic circuit, solder points etc. The machine is equipped with sharp steel alloy blade which is corrosion resistant and has longer life and can be sharpened 7 and 10 times. It is also readily available and easy to replace.Salient Features include: Touch panel with five route adjustments for quick change of PCB size settings. Pre-setting of cutting start and end point to control the cutting length.Easily configurable cutting parameters such as cutting speed, adjustable upper blade distance etc.; Upper blade can be adjustable between 0 and 2mm for PCBs of different thickness; Long life steel alloy blade; High frequency lighting to protect eyes and better illumination; Safety devices such as emergency stop to prevent danger to operators.
View Complete Details
Ask Latest Price & Details
Reflow Tracker Temperature Profiling System

Reflow Tracker Temperature Profiling System

The Datapaq Reflow Tracker temperature profiling system travels through the process, enabling you to monitor wave and reflow soldering, as well as vapour phase, selective soldering and rework stations. Comprised of specifically designed thermocouples, data loggers, protective thermal barriers and Insight software, this system will help you optimize product quality, expedite process set-up, increase yields and minimize the need for rework.
View Complete Details
Ask Latest Price & Details
Electrolube DCA DCR Conformal Coating

Electrolube DCA DCR Conformal Coating
The high purity solvent helps in diluting acrylic conformal coatings to attain correct viscosity which improves application of protective coating even on complex circuitry. The mixture shows enhanced high temperature performance and improved resistance to chemical solvents.It may also be soldered through, allowing easy repairing in a specific area on board without damaging the adjacent circuitry. The cured coating can be easily removed with solvents such as Ultrasolve (ULS).
View Complete Details
Ask Latest Price & Details
Electrolube ULC Cleaning Chemical

Electrolube ULC Cleaning Chemical
The Ultraclens (ULC) is a superior ozone-free solvent for hard and efficient cleaning critical electro-mechanical assemblies. It is generally used in cold cleaning processes and in applications where use water based chemicals is not recommended.The chemical has a low evaporation rate and high flashpoint making it ideal for usage in cleaning tanks. It may also be used in ultrasonic cleaning equipment for use with flammable liquids. A fiber bristle brush or foam tipped bud may be used to remove stubborn flux deposits.
View Complete Details
Ask Latest Price & Details
Electrolube Resins

Electrolube Resins
Electrolubes potting and encapsulation resin is generally used to safeguard and shield electrical and electronic components on pcb against extreme environmental and mechanical conditions for instance moisture, vibration, thermal and physical shock and other general chemical contaminations.Electrolubes potting and encapsulation resin is generally used to safeguard and shield electrical and electronic components on pcb against extreme environmental and mechanical conditions for instance moisture, vibration, thermal and physical shock and other general chemical contaminations.
View Complete Details
Ask Latest Price & Details
Simco Electrostatic Field meter FMX-004

Simco Electrostatic Field Meter FMX-004

The Simco FMX-004 is an electrostatic field meter. It is used to locate and measure static charges. It is very compact, pocket size and simple to use. It has the following functions which are operated by pushbuttons: Power onoff, Zero adjustment, Ion Balance and Hold. Use the hold button to retain the display of the reading. It tests for positive and negative polarity up to + 30.00 kV at a distance of 1inch. It has two LED lights which are used to correctly position the field meter from the object. The results are displayed on a LCD monitor. The results are also displayed as bar graphs: positive polarity is displayed as red and negative polarity as blue. It also displays error messages and battery capacity. The field meter can also use air ionization to measure the static charges. For accurate results the field meter is well-grounded.
View Complete Details
Ask Latest Price & Details
Laser Vision Measurement

Laser Vision Measurement
  • Feature Easily prevents defects from printing process, Quality Tasted, High strength
  • Voltage 110V, 220V, 280V
  • Driven Type Electric
  • Color Silver, Grey, Black, Yellow
  • Warranty 1 Year, 2 Year
  • Weight 100-500 kg

We are the main supplier of this product.

View Complete Details
Ask Latest Price & Details
Hakko Fr-702 Rework Station

Hakko Fr-702 Rework Station

Hakko 702 B Rework Station is a four port rework station. The ports have two soldering irons, a de-soldering gun, and a hand piece for hot air SMD rework. The stations compact design saves a lot of bench space. Also, the station has a built-in double cylinder type vacuum generator that can provide a vacuum pressure of up to 80kPa(600mmHg), a suction flow of up to 15Lmin, and an air flow up to 23LMin. In addition, for solderingdesoldering purposes you can use a variety of tips or nozzles available in the Hakko series.
View Complete Details
Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

List of Other Products by Sumitron Exports Private Limited from Delhi, Delhi.
Product / Services
Post Buy Requirement
SE

Sumitron Exports Private Limited
Rohini, Delhi

Write a Review
Call 08069182177 Ext. 477

Our Products

  1. Soldering Equipment 13 Products available
  2. Lubricants 4 Products available
  3. Soldering Machine 3 Products available
  4. Soldering Machines & Accessories 3 Products available
  5. Epoxy Coatings 3 Products available

  6. Electric Cutting Tools

    2 Products available

  7. Measuring Instruments & Equipment

    2 Products available

  8. Cleaning Chemicals

    2 Products available

  9. Resins

    1 Products available

  10. Screwdrivers

    1 Products available
  11. Others Products 46 Products available

Our Products

Our offered Product range includes Electrolube TBS Thermal Management System, Electrolube PUC Thermal Management System, soldering robot, Tsutsumi IMPACIII TS-711 Controller and Easy Cut Depaneliser.

Electrolube FLU Fluxclene Cleaning Chemical

Electrolube FLU Fluxclene Cleaning Chemical
This ozone free cleaning chemical easily cleans the residual flux from soldering operation, keeping the circuit traces neat and clean. The chemical dries fast and cleans efficiently compared to traditional CFC based solvents, easily giving MIL-STD cleanliness, without leaving a film.It is compatible for use on plastics, seals, PCB components, rubbers and elastomers and is formulated to remove all types of rosin (types R, RA and RMA), no-clean, water soluble and synthetic (type SA) flux.
View Complete Details
Ask Latest Price & Details
Electrolube TBS Thermal Management System

Electrolube TBS Thermal Management System

The Thermal Bonding Compound (TBS) consist of two metal oxide based epoxy solvents, which on mixing and application showcase excellent bonding and thermal conductivity characteristics while staying electrically insulating.It is specifically designed for applications requiring special thermal conductivity qualities for instance in manufacture of heat sink assemblies. The solution has high bond strength and excellent adhesion, therefore serves as an alternative to welding and brazing processes.The easy to prepare mixture cures efficiently at room temperature and consists of minute solid glass spheres to ensure uniform thickness throughout application area.
View Complete Details
Ask Latest Price & Details
Electrolube PUC Thermal Management System

Electrolube PUC Thermal Management System

This Polyurethane Coating (PUC) is designed to form a stiff and flexible protection against harsh environmental and physical conditions toEven when cured at room temperature the coating shows improved resistance solvents including acid and alkalis. It may also be soldered through, allowing easy repairing in a specific area on board without damaging the adjacent circuitry. The cured coating can be easily removed with solvents such as Electrolube CCRG.
View Complete Details
Ask Latest Price & Details
Tsutsumi MINIMAX II TX 821 Soldering Robot

Tsutsumi MINIMAX II TX 821 Soldering Robot
The Tsutsumi Minimax II TX-821 is a soldering robot used for point and slide soldering. The X, Y, and Z axis have 300X200X100 mm range of operation. It has an AC servo motor which is virtually maintenance free. It has a four axis tooling system. Every axis has a ball screw for precise operation. A low speed movement of 0.1mmsec can be set. A low speed ensures good stable slide soldering and also reduces the tact time. It has a 4-axis PTP control. It also has simultaneous 3-axis linear and circular interpolation motion. It has MAXEED TS-621 controller. It enables registering of up to 48 soldering programs. 99 soldering conditions can be added. The computer software TSCOWin manages the data required for soldering on a computer. It has a large data storage capacity, up to 6000 program steps and 3000 positions of points can be stored.
View Complete Details
Ask Latest Price & Details
Tsutsumi Mcross TX m444A 4 Axis Soldering Robot

Tsutsumi Mcross TX M444A 4 Axis Soldering Robot
The Tsutsumi miCross TX- m444 is a soldering robot used for point and slide soldering. The X, Y, and Z axis have 400X400X100 mm range of operation, which corresponds to 200X200X100 mm range of motion. The base of the robot is made of aluminum to give it good rigidity. It has servo motor and a ball screw which help in achieving accurate repetitions and improving the carrying capacity. It has a simultaneous 4-axis PTP control. It also has simultaneous 3-axis PTP and CP functions. It has MAXEED TS-621controller which is used to check and adjust feeding amount, feed rate, and temperature of soldering wire.
View Complete Details
Ask Latest Price & Details
BGA Rework Station FR-811

BGA Rework Station FR-811
Possible to make full-scale thermal profiles with 6-zone hot air and a bottom heater. Possible to measure and record temperature of components and PWB with type K thermocouple. The dedicated software to link a station and a computer for easy and quick settings. Easy data transfer through an USB cable
View Complete Details
Ask Latest Price & Details
Power Torque Electric Screwdrivers

Power Torque Electric Screwdrivers
  • Material Plastic, Alloy steel,
  • Warranty 1 Year, 2 Year
  • Feature Fully Automatic shutoff, Quality Tasted, High strength
  • Color Silver, Grey, Black
  • Weight 50-100 Gm, 100-150 Gm, 150-200 Gm
  • Driven Type Electricity
View Complete Details
Ask Latest Price & Details
soldering robot

Soldering Robot
  • Power requirements Ac 100 V = or - 10% 50 / 60 Hz 1.0 Kva
  • Air requirement 0.40.5 Mpa5 kgf / c Dry air
  • Drive method AC servomotor, Ball screw drive
  • Movement method, No. of control axis PTP, Total 4-axis control ( 3-axis simultaneous linear and circular interpolation
  • Ambient temp. Humidity, Environment 040, Non-condensing, no corrosive gas and no significant dust
View Complete Details
Ask Latest Price & Details
Wire Cutters

Wire Cutters
  • Application Wire Cutting
  • Color Brown, Grey, LIght White, Metallic, White, Red
  • Handle Material Plastic
  • Material Mild Steel
View Complete Details
Ask Latest Price & Details
Tsutsumi IMPACIII TS-711 Controller

Tsutsumi IMPACIII TS-711 Controller

The Tsutsumi IMPACIII TS-711 is an automatic controller for soldering. It has a 32 bit micro-computer for controls. It reads and writes data using the RS-323C communication port. It enables registering of up to 31 soldering conditions. These conditions check for the length and end of the soldering wire, clogging of solder, temperature of soldering iron tip, and so on. In case of any problem, the controller stops the soldering operation and sends the error message to the output device. The solder length to be fed can be set from 0 to 99.9mm or 0 to 999mm. The solder feeding speed can be set from 0 to 99.9mmsec. The soldering time can be set from 0 to 9.99sec or 0 to 999.9sec. Optionally use the computer software TSCOWin to manage the data required for soldering on a computer.
View Complete Details
Ask Latest Price & Details
Easy Cut Depaneliser

Easy Cut Depaneliser
  • Dimensions 355 mm , 190 mm , 670 mm
  • Weight 20 kg
  • Connection 115 / 220 Volt
  • Thickness PCB 1.0 mm - 3.2 mm
  • Nicked channel 0.3 mm to 0.8 mm
  • Angle of Nicked Channel 25 to 30 deg
View Complete Details
Ask Latest Price & Details
Hakko FR 870 Rework Station

Hakko FR 870 Rework Station

Hakko FR 870 is an infrared board preheater that comes with 6 infrared halogen lamps with a power consumption of 460 W. FR 870 is used to raise the temperature of the PCB. A heated PCB allows the components to be soldered more easily with good results. This device is suitable in areas where there is medium to high mass board assemblies and that can sink a significant amount of energy. This device has a unique power mode that allows you to set the output manually or thermocouple mode. The setting range for Power mode is 0-100%, whereas the setting range for TC modem is 50 200 degree Celsius
View Complete Details
Ask Latest Price & Details
Hakko 882 heating gun Soldering Accessories

Hakko 882 Heating Gun Soldering Accessories
Hakko 882 heating gun is a portable heating blower, which is easy to handle. This device is not dependent on an external soldering station. It has a power consumption of 800W and comes in three models 880, 881, and 882. It is designed to be used in applications where heating operations including drying paint, processing shrink films and shrink tubing, drying resin putty for sheet metal, repairing automobile urethane bumpers, applying long-length floor materials, and vinyl moldings are performed. The various models available in this family can reach up to a temperature of 400 Degree Celsius450 Degree Celsius. You can choose amongst these models based on your requirement and the work load.
View Complete Details
Ask Latest Price & Details
Hakko 96 Solder Pot

Hakko 96 Solder Pot

Hakko 96 is a soldering pot. It has a lead free ESD safe soldering cord and has a power consumption of 200W. It has a temperature range of 100 to 450 Degree Celsius This pot can store large-capacity solder bath and can hold large amount of solder. This pot helps maintain the solder temperature throughout continuous operations. The stainless steel body of this pot offers greater durability, whereas the solder overflow prevention rim around the pot prevents solder overflow and offers greater safety. In addition, the pot also comes with a waste collector that offers operating ease and efficiency.
View Complete Details
Ask Latest Price & Details
Hakko Sppon Desoldering Equipment

Hakko Sppon Desoldering Equipment

Hakko Sppon is a light weighted and economically designed desoldering tool. Though it is light weighted, it is powerful enough for a heavy duty desoldering procedure. This tool comes with a unqiue cleaning shaft that allows easy cleaning of the nozzle. The nozzles are easily replaceable and can be chosen from the Hakko series. The Hakko Sppon comes in five different models that have different absorption capacities, namely 18 (absorption capacity: 12cm3(12cc)), 18G (absorption capacity: 12cm3 (12cc) w Guard), 20 (absorption capacity: 20cm3(20cc)), 20 G (absorption capacity: 20cm3 (20cc) w Guard), and DS01P (absorption capacity: 28cm3(28cc)).
View Complete Details
Ask Latest Price & Details
Hakko Fr-701 Rework Station

Hakko Fr-701 Rework Station

Hakko 701 is a soldering and desoldering system. It consists of a ceramic heating element and has a temperature range of 380 Degree Celsius to 480 Degree Celsius. It is a perfect option for dual mode operations. Due to its dual mode it utilizes minimum bench space so that you can use your bench space efficiently without working for the size of this equipment. You can also combine this system with N2 system to reduce soldering defects. You can easily replace nozzles in this device and use the ones that well known in the Hakko series.
View Complete Details
Ask Latest Price & Details
Hakko FG 102 Thermometer Soldering Accessories

Hakko FG 102 Thermometer Soldering Accessories
The HAKKO FG 102 is a battery operated thermometer.It is used to measure the temperature of soldering tips.It has a compact design with good portability.It enables high precision temperature measurement free of human and transcription errors. Standardized measurement of temperature is possible.It measures temperature between 0 to 700C.It enables very easy management and transfer of the recorded temperature data to computers.It has a power saving mode which ensures longer battery life. It automatically indicates the calibration date for the thermometer.
View Complete Details
Ask Latest Price & Details
Hakko 394 Soldering Accessories

Hakko 394 Soldering Accessories
he HAKKO 394 is a battery operated pick-up tool. It has a built-in vacuum pump for suction. It is best suited to pick up small micro components of PCBs, ICs, such as resistors, capacitors, and so on. It has continuous suction to ensure smooth handling of the micro components. It has interchangeable accessories like pads and nozzles for different surface areas of components. It can be operated with various batteries, such as, Alkaline, Nickel-Cadmium or Nickel-Hydrogen batteries. Two AAA size batteries power the pump. It is made of antistatic material to ensure protection of micro components.
View Complete Details
Ask Latest Price & Details
Hakko FR 872 Soldering Accessories

Hakko FR 872 Soldering Accessories
The HAKKO FR 872 is a preheater for large boards up to 330mm x 250mm.It has four heating zones. Each zone can be activated or deactivated individually. Only the activated areas are heated. This makes working on smaller boards and reworking on some smaller areas on large boards very comfortable. It has infrared carbon filaments to ensure efficient heating.It has various modes to ensure easy control of the heating temperature. It has adjustable guides that enable working with boards of different sizes.
View Complete Details
Ask Latest Price & Details
Hakko FM 2030 Soldering Accessories

Hakko FM 2030 Soldering Accessories
The HAKKO FM 2030 is a 140W composite soldering iron. It is used exclusively with HAKKO FM-206, a soldering station which allows multiple operations. It has a built-in heater. It has high thermal conductivity. Temperature range is between 200 to 500C.It is ideal for soldering of large components such as, power-supply boards, heat sinks, shield cases and coaxial cables. It can also be used for soldering precision micro components such as, multilayer boards. It can be used with 16 types of replaceable tips of varied shapes for soldering. Large range of tips enables soldering in a variety of applications.
View Complete Details
Ask Latest Price & Details
Hakko FT 710 Cleaner Soldering Accessories

Hakko FT 710 Cleaner Soldering Accessories
Hakko FT 710 Cleaner allows you to clean your soldering equipment efficiently. The encapsulated housing of FT 710 prevents the iron tip from splashing, which is significant cause of solder failure. In addition, it also prevents the soldering paste from entering in to the driver. For this, it uses two types of brushes for solder cleaning one is made of Resin (removes solder partially) and the other is made of metal (removes solder entirely). The tip temperature drops while cleaning eventually leading to high workability. This device is compatible with various HAKKO soldering irons and tips and is very easy to maintain
View Complete Details
Ask Latest Price & Details
Hakko FG 100 Thermometer Soldering Accessories

Hakko FG 100 Thermometer Soldering Accessories
The HAKKO FG-100 thermometer, which is suitable checking temperature of soldering tip, provides quick and accurate tip temperature of a soldering machine and the solder pot using a fine CA wire sensor. This helps in verification of temperature during the soldering process and is also helpful in calibration purposes. The sensors are disposable, lightweight, easy-to-replace, and have twice the service life when compared to conventional sensors. The thermometer also helps you obtain the maximum temperature reached during the soldering process with the help of the MAX HOLD button. It comes with a large and clear display and features like auto shut off and an indicator for low battery so that you do not get incorrect results.
View Complete Details
Ask Latest Price & Details
Hakko FX 300 Solder Pot

Hakko FX 300 Solder Pot

Hakko FX 300 Solder Pot is a ceramic heating control soldering pot with digital temperature display and offset function. It is analogous and lead-free compatible. FX-300 comes with two pots and has four selectable heating programs (Sn-Pb (TinLead), Sn-Ag-Cu (TinSilverCopper), Sn-Cu (TinCopper), and Sn (Tin)) that allow you to get the desired temperature quickly for the metal being used. A special coating can be made available to you on request that enhances the life of the pot. The unique timer function helps you realize the time since the pot is being used. This helps you judge the time for a quick replacement.
View Complete Details
Ask Latest Price & Details
Hakko FM 206 Rework Station

Hakko FM 206 Rework Station

Hakko FM 206 Rework Station is a 3-port station that enables you to convert the station into soldering, desoldering, and rework stations. These ports are simultaneously powered. Due to this, you can save a lot of bench space. It is a highly customizable rework station, and also comes with an in-built vacuum pump for hot airflow. The Graphic User LCD of this device helps you in easy installation of the device, and also helps in various operations that this rework station can perform. With advanced features, such as Auto shut off, sleep function, passcode protected, and theft prevention you can be rest assured that the station will have long life.
View Complete Details
Ask Latest Price & Details
Hakko FM 203 Rework Station

Hakko FM 203 Rework Station

Hakko FM 203 Rework Station is a dual port soldering station. It has a power consumption of 140W, and has temperature range of 200-450 Degree Celsius. You can attach two soldering irons to this station at the same time. This helps you to use the appropriate iron without having to connect them alternatively. The stations process controls allow you to select the desired soldering temperature without changing the iron tip. The station comes with features, such as power thermal recovery, sleep function, and auto power shut off. In addition, various replaceable tips and nozzles can be attached to the soldering iron.
View Complete Details
Ask Latest Price & Details
Hakko FA 400 Smoke Absorber

Hakko FA 400 Smoke Absorber
Hakko FA 400 is a smoke absorber that removes soldering smoke and fumes in a quick, safe, and an efficient manner. It protects the operator from breathing harmful fumes that might cause headache, dizziness, or eye trouble. FA 400 can be installed horizontally, vertically, or on arm stand based on your requirement. The smoke absorber contains the standard activated carbon filter that absorbs up to 80% of fumes and is ESD safe. FA 400 has a power consumption of 19W (220V), 50Hz and has an airflow of 0.4mmin for horizontal installation and an airflow of 10mmin for normal installation.
View Complete Details
Ask Latest Price & Details
Hakko FR 300 Desoldering Equipment

Hakko FR 300 Desoldering Equipment

The HAKKO FR 300 is a very compact desoldering tool.It is used to remove solders. Good heat recovery rate enables lead free desoldering.It has power ONOFF switch on the handle.It has an excellent nozzle replacement system. Cleaning and replacing the nozzle is possible even when the unit is hot. It has preset temperature settings. Adjustable dial on the handle enables easy temperature control.LED indicators are used to indicate if heating is in progress. LED also used to indicate if the tool is idling at the preset temperature setting. It has a holder for the nozzle. This ensures accident free operation while working with hot parts of the tool.
View Complete Details
Ask Latest Price & Details
Hakko 950 Tweezer Soldering Accessories

Hakko 950 Tweezer Soldering Accessories
Hakko 950 is an SMD tweezer that is designed to withstand various stations. The device consumes 50W of power and has a temperature range of 200-400 Degree Celsius. It is designed to deliver direct heat to components that helps in preventing damage to the surrounding components on dense or crowded boards. The tweezer helps an operator to remove SMD chips and flat packs of up to 25mm. The tips of this tweezer are easily replaceable and can be easily aligned. In addition, it requires very less maintenance. The package of Hakko 950 contains tweezers, a heat resistance pad, and a tip alignment tool.
View Complete Details
Ask Latest Price & Details
Hakko FA 430 Smoke Absorber

Hakko FA 430 Smoke Absorber
Hakko FA 430 is a smoke suction device that removes soldering smoke and fumes in a quick, safe, and an efficient manner. It protects the operator from breathing harmful fumes that might cause headache, dizziness, or eye trouble. This suction device has a powerful suction mechanism that uses ducts and yet it is silent. This device comes with a selectable air volume that allows you to select the amount of air volume that you want to throw out. In addition, this suction device has an automatic filter replacement light that makes your life easy when replacing a filter and ensures optimum performance.
View Complete Details
Ask Latest Price & Details
Hakko FG 101 Thermometer Soldering Accessories

Hakko FG 101 Thermometer Soldering Accessories
Hakko FG 101 is a soldering iron tester that comes handy for the daily maintenance of station type soldering irons. It comes with amazing features that measure Leak Voltage Check, Tip-to-ground resistance, and Tip temperature. These features are very importance to prevent the devices being worked on from any sort of damage and are also important for proper maintenance of station type irons. In addition to these features, the MAX HOLD button allows you to see the maximum temperature reached during a soldering process and also has an AUTO ZERO function to correct the zero point error.
View Complete Details
Ask Latest Price & Details
Hakko FR-810B Rework Station

Hakko FR-810B Rework Station

Hakko FR 810 is a turbine powered digital SMD hot air rework station. It can provide hot air with a temperature of up to 600 Degree Celsius having and having airflow of up to 115Lmin. The right amount of airflow and air temperature can be achieved using the digital controls. This allows it to be used on low density board to high density boards. The rework station has a simple procedure for removing the nozzle and is easily maintainable. You can use conventional nozzles with FR 810 using a conversion adapter. The temperature range for this station is between 50 Degree Celsius to 600 Degree Celsius and the airflow speed ranges from 5 Lmin to 115 Lmin.
View Complete Details
Ask Latest Price & Details
Tsutsumi Feeding UniT TF 621 For Soldering Robot

Tsutsumi Feeding UniT TF 621 For Soldering Robot

The Tsutsumi TF-621 is a feeder unit. It is attached to the soldering robot. Solder wires with diameters from 0.5mm to 1.6mm can be used. The feeder ensures precise feeding of solder wire up to 0.1mm. The feeder is also used to detect clogging of solder. It also detects the end of solder wire. It has a pulse motor drive. Optionally cut-in feeder rollers can be attached. The rollers prevent the flux from scattering.
View Complete Details
Ask Latest Price & Details
Tsutsumi AUTOMATIC SOLDERING UNITS

Tsutsumi AUTOMATIC SOLDERING UNITS

The Tsutsumi TI-652 is a soldering iron. It has a rotary cylinder which controls and ensures smooth vertical motion of the tip. The cylinder uses an S character curve control. This control reduces the scattering of solder ball during operation. It also reduces the up-down motion of the tip, thus reducing the tact time. The iron has a stroke length of 8mm. The Tsutsumi TI-632 is a soldering iron. It has a direct dynamic cylinder .The iron has a stroke length of 15mm. Soldering tips TKN or TKH can be used.Optional accessories improve the performance of the iron. It uses a ceramic heater TH-6-70-100. It uses the thermocouple unit TCA-16. The heater and thermocouple unit must be purchased separately along with the soldering iron. Another optional accessory is the holding arm for the iron. For point soldering, holding arm TR-621 can be used. Optionally, Ruby Nozzle TNZ-3 can be used to precisely supply solder wire to the soldering tips.
View Complete Details
Ask Latest Price & Details
ECOR 4077NA KOKI Reflow System

ECOR 4077NA KOKI Reflow System

The KOKI ECOR 4077NA ECOR 4099NA are reflow systemsovens. It is used in reflow soldering of surface mount electronic components. It circulates heated gases in the heater like a tornado. This is called the Tornado circulation method. This ensures good circulation and less loss of heated air. The power consumption has been reduced by 40%. The oven has a very good sealing system which also reduces the consumption of N2. It has a very good mist collection system. The oven uses convection heating technique to endure uniform heating capacity. It has rail system with adjustable width which ensures that the rails are parallel even under high temperature. The PCBs are transported safely on these rails.
View Complete Details
Ask Latest Price & Details
KOKI Spray Fluxer VIS 350

KOKI Spray Fluxer VIS 350

The KOKI VIS 350 is a spray fluxer used to spray flux from the underside of the PCB. This ensures that the top side of the PCB is not affected by the flux and water mists. It provides an even flux coating. The flux is sprayed from a shorter distance. This reduces the rebound of flux particles thus ensuring good coating efficiency. It results in less wastage of flux material. It has a sub-tank of flux. This allows changing of flux without stopping the machine. It has a LCD monitor where the X and Y dimensions of the spray area can be set. The monitor also displays error messages like flux empty, less air pressure, and so on. It has a pre-heater unit which heats the PCB before spraying the flux. This reduces the adhesion of water vapor to the PCBs by 30%, which ensures better soldering quality. With evaporation of water in the pre-heater, the flux fluidity is improved.
View Complete Details
Ask Latest Price & Details
Hakko 485 Connect Soldering System

Hakko 485 Connect Soldering System
Hakko 485 is soldering system. It is developed for soldering and desoldering components, such as connectors, LCD display, and so on that are mounted on circuit boards. This soldering system controls the flow of solder material, which is controlled by both time and temperature. With this system you can also attach various nozzles from the Hakko series, which are available in different sizes. This system makes your soldering and desoldering cycles automatic and precise. In addition to these features a built-in locator light pinpoints the exact position for component placement, which is very helpful for an operator. After soldering, the solder material that remains in the through hole can be completely removed by the air unit.
View Complete Details
Ask Latest Price & Details
Ambitec GAM 12 SMD Component Counter

Ambitec GAM 12 SMD Component Counter

Fully automatic component counter is ideal for counting chips with great precision and accuracy and simple to operate.It has a count capacity of -99999 to 99999. The presence of internal power backup helps in sustaining system during blackout.Salient features : A material missing protection device from running is provided, reel derailment protection device is provided to counter tapes fall off, easy to adjust tape tension by tighteningor loosening, adjustable speed (speed up or slow down), a drawing type LCD screen is provided to easily set parameters and read data.
View Complete Details
Ask Latest Price & Details
Ambitec GAM 60 60A Solder Paste Mixer

Ambitec GAM 60 60A Solder Paste Mixer
It is a cream solder mixer with high capacity of solder paste mixing.It utilizes step mixing function to prepare optimal viscosity substrate under controlled temperature conditions. It exploits rotationrevolution technique for kneading of solder powder and flux and avoids aeration that can cause solder ball spattering. It takes care of the cold solder paste and brings it to normal temperature in few minutes. Its high capacity kneading process dramatically reduce operation time and contribute to stabilization of material quality as well as increasing yield rates.
View Complete Details
Ask Latest Price & Details
Ambitec GAM 62A Centrifuge Machine

Ambitec GAM 62A Centrifuge Machine
It is a unique energy efficient machine used to expell water and other fluids from moist substances and also sometimes used to separate liquids of different densities by centrifugal action.It is a very versatile centrifuge for applications in industrial applications and is renowned for its high build quality.include well designed durable structure; Universal holder suitable for housing all sorts of plastic tubes.Anti-aeration process no bubbles left in Glue Tube. Enhanced safety mechanism with Emergency stop button to ensure safe operation.Simple and user friendly operation. LED panel for clear countdown display, Audio and light alarms to indicate completion of cycle and Low Maintenance.
View Complete Details
Ask Latest Price & Details
Ebso EASY CUT300 300M PCB Depanelizer Router

Ebso EASY CUT300 300M PCB Depanelizer Router
The EasyCut provides an economical solution for efficient de-penalizationseparation of pre-scored PCBs. The machine has a set of sharp high-speed steel circular blades, each of which is covered with guards to ensure safety of operator. The lower blade is driven by a motor and the upper blade is quick adjustable for exact positioning between the two knives and the work piece. Multi-diameter blades can be easily mounted by removing a threaded holding disk from the main shaft. The available range of PCB depanelizers include the EasyCut300 manual version and EasyCut300M motorized version
View Complete Details
Ask Latest Price & Details
Janome PCB Depaneling Desktop Robot

Janome PCB Depaneling Desktop Robot

The Janome JR2000NERT Series is a depaneling robot. It is used in various operations related to PCBs, for example, manufacturing and cleaning of PCBs. The operations are controlled using very simple software. Customize the software to suit your requirement. The software can save up to 255 programs. The robot consists of a robotic unit, electrically driven router, software, and a kit for collecting dust. The robot has a very sturdy design with its base and column made of aluminum alloy. The robot has a double-check system, which minimizes defects. It has a labyrinth mechanism which does not allow objects such as screws, liquid, and dust to enter the robot. It has an inbuilt sequencer that runs the predefined programs. Display is available in 10 different languages. Measurement units can be switched between mm and inches.
View Complete Details
Ask Latest Price & Details
Ambitec Gam 70 Laser Vision Measurement

Ambitec Gam 70 Laser Vision Measurement

It helps in surveying and inspecting the quality of tin solder on printed circuit boards. It measures the length and thickness of each path and also records the gap between adjacent solders. The recorded data for each PCB is stored automatically in system file and if needed, can be printed as a report.The solder thickness distribution diagrams and control diagrams of X_BAR_R are efficiently recorded by the machine for each product in different production lines.Salient Features include User friendly interface for ease of operation. Laser contact less technology to prevent damage due to contact; Operational modes: Manual & Automatic.Automatic focus adjustments based on PC board thickness.; Full screen display for easy sampling, operation.Real time display of all survey parameters for better quality control and elimination of printing defects such as bridging, location deviation etc.
View Complete Details
Ask Latest Price & Details
Ambitec GAM 30 V CUT PCB Separator

Ambitec GAM 30 V CUT PCB Separator

It is an ideal solution for smooth cutting of printed circuit boards. Its robust design ensures adequate pressure at the cutting edge to prevent damage to electronic circuit, solder points etc. The machine is equipped with sharp steel alloy blade which is corrosion resistant and has longer life and can be sharpened 7 and 10 times. It is also readily available and easy to replace.Salient Features include: Touch panel with five route adjustments for quick change of PCB size settings. Pre-setting of cutting start and end point to control the cutting length.Easily configurable cutting parameters such as cutting speed, adjustable upper blade distance etc.; Upper blade can be adjustable between 0 and 2mm for PCBs of different thickness; Long life steel alloy blade; High frequency lighting to protect eyes and better illumination; Safety devices such as emergency stop to prevent danger to operators.
View Complete Details
Ask Latest Price & Details
Reflow Tracker Temperature Profiling System

Reflow Tracker Temperature Profiling System

The Datapaq Reflow Tracker temperature profiling system travels through the process, enabling you to monitor wave and reflow soldering, as well as vapour phase, selective soldering and rework stations. Comprised of specifically designed thermocouples, data loggers, protective thermal barriers and Insight software, this system will help you optimize product quality, expedite process set-up, increase yields and minimize the need for rework.
View Complete Details
Ask Latest Price & Details
Electrolube DCA DCR Conformal Coating

Electrolube DCA DCR Conformal Coating
The high purity solvent helps in diluting acrylic conformal coatings to attain correct viscosity which improves application of protective coating even on complex circuitry. The mixture shows enhanced high temperature performance and improved resistance to chemical solvents.It may also be soldered through, allowing easy repairing in a specific area on board without damaging the adjacent circuitry. The cured coating can be easily removed with solvents such as Ultrasolve (ULS).
View Complete Details
Ask Latest Price & Details
Electrolube ULC Cleaning Chemical

Electrolube ULC Cleaning Chemical
The Ultraclens (ULC) is a superior ozone-free solvent for hard and efficient cleaning critical electro-mechanical assemblies. It is generally used in cold cleaning processes and in applications where use water based chemicals is not recommended.The chemical has a low evaporation rate and high flashpoint making it ideal for usage in cleaning tanks. It may also be used in ultrasonic cleaning equipment for use with flammable liquids. A fiber bristle brush or foam tipped bud may be used to remove stubborn flux deposits.
View Complete Details
Ask Latest Price & Details
Electrolube Resins

Electrolube Resins
Electrolubes potting and encapsulation resin is generally used to safeguard and shield electrical and electronic components on pcb against extreme environmental and mechanical conditions for instance moisture, vibration, thermal and physical shock and other general chemical contaminations.Electrolubes potting and encapsulation resin is generally used to safeguard and shield electrical and electronic components on pcb against extreme environmental and mechanical conditions for instance moisture, vibration, thermal and physical shock and other general chemical contaminations.
View Complete Details
Ask Latest Price & Details
Simco Electrostatic Field meter FMX-004

Simco Electrostatic Field Meter FMX-004

The Simco FMX-004 is an electrostatic field meter. It is used to locate and measure static charges. It is very compact, pocket size and simple to use. It has the following functions which are operated by pushbuttons: Power onoff, Zero adjustment, Ion Balance and Hold. Use the hold button to retain the display of the reading. It tests for positive and negative polarity up to + 30.00 kV at a distance of 1inch. It has two LED lights which are used to correctly position the field meter from the object. The results are displayed on a LCD monitor. The results are also displayed as bar graphs: positive polarity is displayed as red and negative polarity as blue. It also displays error messages and battery capacity. The field meter can also use air ionization to measure the static charges. For accurate results the field meter is well-grounded.
View Complete Details
Ask Latest Price & Details
Laser Vision Measurement

Laser Vision Measurement
  • Feature Easily prevents defects from printing process, Quality Tasted, High strength
  • Voltage 110V, 220V, 280V
  • Driven Type Electric
  • Color Silver, Grey, Black, Yellow
  • Warranty 1 Year, 2 Year
  • Weight 100-500 kg

We are the main supplier of this product.

View Complete Details
Ask Latest Price & Details
Hakko Fr-702 Rework Station

Hakko Fr-702 Rework Station

Hakko 702 B Rework Station is a four port rework station. The ports have two soldering irons, a de-soldering gun, and a hand piece for hot air SMD rework. The stations compact design saves a lot of bench space. Also, the station has a built-in double cylinder type vacuum generator that can provide a vacuum pressure of up to 80kPa(600mmHg), a suction flow of up to 15Lmin, and an air flow up to 23LMin. In addition, for solderingdesoldering purposes you can use a variety of tips or nozzles available in the Hakko series.
View Complete Details
Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us