Sumesh Petroleum

Makarpura, Vadodara, Gujarat

We are leading manufacturer for oil storage tank which are designed for use in transformer oil. Painted with transformer oil and heat resistant paint inside the tank. We can prepare horizontal as well as vertical storage tank as per specification.

Owing to our well-maintained and organized inventory system, we deliver the same in the committed time. Customers can provide their specifications to us in regards to the packaging of the products as we serve customized packaging requirements. We ensure damage-free products at customer's end.

Description for working :

• A Heatless compressed air dryer is the desiccant air dryer for achieving a dew point of -70^oC or better.
• Process - Incoming compressed air is dried with refrigeration dryer then it passes through carbon filter, pre filter passes through the slide piston valve assembly and is directed towards absorber chamber I where the compressed air passes through the high quality of desiccant. Compressed air drying takes place by absorption. Dry compressed air from absorber chamber I is then passes though the check valve assembly and then through the after filter to the transformer.
• While compressed air is being drying in chamber I the desiccant in chamber II where the desiccant has been wetted in the previous cycle is being simultaneously regenerated. The chamber II is depressurized to the atmosphere through the purge valve in the downward direction. A portion of the dry compressed air passes thrugh the needle valve / orifice plate through the desiccant and flushes out the desorbed moisture.
• When the regeneration is complete, the purge valve is closed and the tower is slowly depressurized to line pressure for a smooth changeover. Efficient dew point of - 70^oC or better can be achieved through effective drying system comprising of refrigeration dryer and Heatless Air Dryer.
• For Continuous measurement of the quality of the air online digital dew point meter can be provided on request.

The reclamation of Transformer Oil is economically justifiable, cost effective and environmentally sounds. The reclamation is economically attractive because of increasing prices for both mineral and synthetic transformer coolants.In our plant, oil is reclaimed by heating, filtration, free moisture removal by coalescer filters, activated fullers earth treatment and vacuum dehydration.

Transformer (Insulating) Oil act as a medium for insulation in the transformer, circuit breaker, high voltage instruments, etc. Transformer Oil is required to be filtered before use and even filtration is required after periodical time.Filtration helps in removal of Moisture content, Dissolved Gases, Acidity, Sludge, Corrosion and other unwanted impurities, thus it helps transformer oil to improve its dielectric strength and Moisture content removal in transformer oil.

Sumesh Petroleum are the made of Dry Air Generator for moisture removal in air. These generators are designed to suit the transformer application with additional refrigeration air dryer, auto drain valve, carbon filter, and after filter and ultra fine filter for removal of particles upto 0.1 Micron. Heatless compressed air dryer is the desiccant type Air dryer for achieving a dew point of -700C or better.

Oil sampling bottle will be suitable for collecting oil samples from transformers and shunt reactors for dissolved gas analysis. Bottle will be of robust construction such that no damage occurs during frequent transportation of samples from site to laboratory.Material of construction: generally sampling bottles are made from stainless steel 304 and 316 material, with all accessories fitted with the bottle like, filling and drain valves, hex nipple made from stainless steel 304 and 316 material.It is possible to seal the bottle gas tight and is fitted with suitable cocks and valves both ends. Design of bottle is cylindrical type and loss of hydrogen will not exceed 5% per week.

Due to our commitment towards providing quality approved products to the clients, we source the raw materials only from the well-known and trusted vendors of the market. We are staffed with a team of professionals who hold immense knowledge in this domain. They are capable enough to rendering standard as well as tailored packaging requirements of the clients.

Our online transformer dry out unit is equipped with high quality of special media to remove the water from the transformer and its insulation paper. It is a moisture retaining and absorbing media. The moisture is separated from the oil without heating and vacuuming thus risk of oil spillage and operator is eradicated from the system.Uses oil as the transfer medium to extract water from the paper insulation, where 95% of water is retained

We manufacture dry air generator for use in transformer which are designed for transformer purging application. This plant replaces the use of nitrogen and are environmentally friendly.

We are leading manufacturer of Vacuum System which are designed with Vacuum and Roots Booster Pump.

We at Sumesh petroleum aim to provide end-to-end solutions for complete Transformer Overhauling and Maintenance.Transformer Overhauling The basic meaning of Overhauling is to examine or go over carefully for needed repairs. In the process of Overhauling Engineers open the whole Transformer to do the needful cleaning, repair and replacement, in short the process includes overall inspection including lifting of core and coils.

The company has uplifted its reputation in the market by offering fine quality Transformer Evacuation System at nominal prices. We are a focused towards bringing forth exceptional array of products that are quality tested from the initial stages of manufacturing. Our quality inspectors inspect each and every element of the raw material with complete proficiency.

Accessories :

• One Mercury type Gauge (Mc leod Type)
• Vacuum gauge 0-760 mm of Hg(Bourdon type).
• One Vacuum switch shall be provided
• Piping - The piping used will be fabricated Mild steel tubing and the joints will have flanged and have ring sealing will be of Nitrile rubber.
• Valves - vacuum valve & Bellows valves, airing valve, Moisture trap etc.
• Control panel - All electrical control gear mains isolating arrangement, starter, contactors, pilot lamp, push buttons, relays, indicating lamps, metering and interlocking housed in a control panel of CRCA sheet with enclosure. A mimic diagram with indicating lamps on the control panel, all wiring will be neatly routed and all wires terminations will be suitably identify with ferrules.
• The plant will be suitable for operating on 415V, 3 phase, 4 wires, 50 HZ, AC supply.
• Optional Accessories
• Digital Pirani Guage

In order to keep the products in safe condition during transit and handling, we meticulously pack them at our own packaging facility. Also, we make sure that the packaging material is sourced from the trusted vendors. Raw material that is sourced from the reliable places is used as input in the production procedure. In order to make high quality range of products, we check it for quality prior to sourcing.

Details :

• Material of construction - Generally sampling bottle are made from Stainless steel 304 and 316 material, all accessories fitted with the bottle like, filling and drain valves, Hex nipple are also made from stainless steel 304 and 316 material.
• The sample bottle available are of 1 liter, 1.5 liter, 2.0 liter & 2.5 liters capacity.

The Pumping system will be Suitable for evacuation of Transformer Tank. Each section of machine will be used high quality material. The Capacity of the system varies according to the size and capacity of installed transformers.The plant will be portable, mounted on four castor wheels with lifting hooks and towing facilities. The plant will be suitable for outdoor use. Proper guarding arrangement will be provided on all such parts, which are liable to cause accident. The design of plant will be such that parts can be easily replaced if required.

Oil sampling bottle will be suitable for collecting oil samples from transformers and shunt reactors for dissolved gas analysis. Bottle will be of robust construction such that no damage occurs during frequent transportation of samples from site to laboratory.It is possible to seal the bottle gas tight and is fitted with suitable cocks and valves both ends. Design of bottle is cylindrical type and loss of hydrogen will not exceed 5% per week.

Sumesh Pet Make Lube oil filter removes rapid free water and particulate contamination form the lubricating and hydraulic oil with the help of Coalescer Filter Separator Systems integrating with the heating and vacuuming arrangement for effective removal of moisture. It is backed with special filtration for removal of particles to derive optimum cleanliness. The unit is provided with the control panel which allows easy and hassle free operation.

With an experience of more than three decades, we are providing an ideal solution for the storage of transformer oil. With our help, one can acquire oil storage tank on per day and monthly rental basis. Our service charges are reasonable. We are based in Vadodara (Gujarat, India) and known for our prompt and premium solutions. For more details, visit our contact us page and dial the given numbers.

Capacity :       

• 6 KL
• 8 KL
• 12 KL
• 15 KL
• 20 KL
• 23 KL
• 25 KL
• 60 KL etc to suit as per requirements       

       
Features :       

• It is painted with heat and transformer oil resistant paint from inside.
• It is equipped with Silica Gel breather.
• The inlet and outlet valves are kept diagonal and designed to suit the requirement of transformer oil filtration.
• The tank is designed keeping in mind the transportation to ensure low cost transportation at site.
• It is used in new transformer oil and when used for used transformer oil it is cleaned with fresh transformer oil.

Consider our name if you wish to appoint a professional assistance that can expertly draw samples and provide accurate result. Since inception in 1980, we have been rendering transformer oil testing services to the clients in the city. Our qualified and skilled professionals collect the sample of the transformer oil from the site and test it in our in-house labs. We charge economically for our services. We are based in Vadodara (Gujarat, India); clients can contact us anytime for further discussion.

The Filter machine is designed keeping in mind the transportation to ensure low cost transportation at site.Effectively maintained equipments for optimum results, Easy to learn and operate and can be handled by any unskilled workers.

The offered assortment of products is sternly checked, examined by the quality experts to maintain the set industrial standards. We are a noteworthy name, engaged in offering qualitative lot of products that are the perfect outcome of premium material and modern work methods. Also, the material is sourced from the trusted places after complete quality checking. Capacity form 2 KL to 30 KL & more

Advantages :

• The tank is Mobile and easily movable with pneumatic or solid tyres.
• The tank is painted with Heat and Oil resistant paint inside the tank.
• It is provided with Silica Gel breather for removal of outside dust and moisture entering the tank.
• RTO approved design.
• Fulfills all requirement as per the need of transformer manufacturers and oil filtration.

Application :

• Transformer Oil Filtration
• Transformer Oil Storage
• Oil removal from Transformer
• Internal movement of oil in Sub Station

The Tanks are designed horizontally or vertically as per the requirement. It is manufactured in our well equipped workshop with our qualified welders as per the requirement and IS standard. It is specially designed to store Transformer Oil with the rated capacity at 1000C and is painted with transformer oil and heat resistant paint inside the tank. The oil storage tank shall be also fitted with manhole, outside & inside acess ladder, Silica gel breather assembly, inlet & outlet valve, oil sampling valve with suitable adopter, Oil draining valve, air vent etc.It is provided with Silica Gel breather for removal of outside dust and moisture entering the tank.

We provide Oil Storage tank on hire rental for storage of transformer oil. The tank is specifically used in the transformer oil and it is specially designed and manufactured keeping in mind the filtration of transformer oil.The inlet and outlet valves are kept diagonal and designed to suit the requirement of transformer oil filtration.

the manufacturers of complete range to heatless compressed air dryer system for moisture removal in air, these compressed air dryers are designed for transformer drying application. These air dryes are specially designed to suit the transformer drying application with additional refrigeration air dryer, auto drain valve, carbon filter and after filter.Trough our research and development we are able to design the air dryer for the atmospheric condition of India where the average ambient temperature is quite high throughout the year. The dryer is designed keeping in mind the criticality and sensitivity of the transformers to the moisture.

Ours is a professionally managed firm, involved in manufacturing and renting of heatless compressed air dryer system for moisture removal in air. Our offered air dryer plant is made as per the atmospheric conditions and the average ambient temperature. It is equipped with a compressor and air receiver combination. We are based in Vadodara (Gujarat, India); clients can get in touch with us anytime for hiring air dryer plant on weekly and monthly rental basis.

Interested buyers can place orders with us, timely delivery of the same are our foremost concern. We are a buyer's best bet when it comes to purchasing lube oil filters. Our company is a promising supplier.

Tests include the provision of sample bottles.Our experienced and qualified engineers collect the sample of the transformer oil from the site. Collection of sample plays an important part for oil testing. If the sample drawn is not with appropriate skill the result will not be accurate.We have trained our technicians specially for collecting the oil samples keeping in mind the sensitivity of the transformer oil.

We are a trustworthy supplier offering a wide assortment of oil filtration equipment in the market. Sited in vadodara(india), we guarantee safe side deliveries of consignments in a time limited period.

Vadodara (Gujarat, India) based company; we are involved in providing transformer oil filtration plant annual maintenance services to the clients in the city. With our services, we conduct a regular survey to ensure the operational fluency of the filtration plant and if found any discrepancy; we take preventive measures to resolve it. We understand that the timely overhauling can save last minute critical situation thus, we monitor plant’s working & leakages and clean & change filter as per the requirements. Above all, we charge economically for our services. Get in touch with us anytime for further discussion.

Transformer oil needs regular filtration to get rid of harmful contaminants that can cause failure. If you are seeking professional assistance that can expertly handle this matter on your behalf, then we can be your best bet. Based in Vadodara (Gujarat, India), we are providing prompt and dependable oil filtration solutions. Clients are required to share oil quantity and transformer rating, we will arrange the filtration of your transformer oil accordingly. Our service charges are also reasonable.

Listed amid the celebrated names in the industry, SP is providing oil filter machine hiring services to the clients in the city. We are based in Vadodara (Gujarat, India) and providing a filtration system that is equipped with the latest technology vital for oil filtration to achieve the value of transformer oil as per IS 335 and IS 1866. We have a team of qualified professionals, who ensure the operational fluency of the provided machine for complete clients’ satisfaction. For more information, dial the given numbers. 
Capacity :      

• Transformer Oil filter machine – 540 LPH
• Transformer Oil filter machine -2250 LPH
• Transformer Oil filter machine -3000 LPH
• Transformer Oil filter machine -6000 LPH
• Transformer Oil filter machine -6000 LPH
• Transformer Oil filter machine -7500 LPH
• Transformer Oil filter machine -10000 LPH etc. to suit as per client’s  requirements      

       
Features :      

• The Filter machine is designed keeping in mind the transportation to ensure low cost transportation at site.
• Effectively maintained equipments for optimum results
• BDV Testing kit (Optional)
• Operator (Optional)
• Easy to learn and operate and can be handled by any unskilled workers