Swiss-made viscosity measurement and temperature control systems for water and solvent based inks. The values of various parameters are measured direcly in the ink supply line of the printing unit. This viscosity controller works on the dropping body measurement principle. The Fasnacht viscosity controler also has an efficient cleaning system, which ensures that the measuring unit and supply line can be cleaned automatically.

The purchase decisions of the modern-day FMCG consumer is dependant largely on the print quality of the packaging material. Uneven colour shades on the printed substrate is a commonly occurring phenomenon, resulting in low quality printed material - which might influence a buyer negatively. Ink viscosity plays a vital role in ensuring uniform colour shades across the printing substrate. Consistent printing and optimum use of ink and solvents can be realised only with stable viscosity.

The output signal from the ValstatSM20 online electrostatic charge sensors ( minimum 1, maximum 18 sensors) can be connected to one or more colour touch panel HMIs for remote or local continuous monitoring and analytics. The collected data is monitored and when the measured value exceeds the measurement range or a pre-set safety level, an alarm sounded. The collected data can be stored, retrieved and analysed.

Distinct from a hand-held meter that is used to periodically measure static charges, the ValstatSM20 is permanently fixed at the location where the target is to be monitored. Hence, variations in measurement due to different operators, location, and distance are completely eliminated. As a result, a real-time, accurate, and continuous signal proportional to the static charge is made available for further analytics and diagnostics. The discharge or neutralising effect of the static charge eliminator is efficiently monitored for continual safety, and preventive maintenance. Expensive man-hours for inspection, testing, and validation are also effectively reduced.

The Valstat V 300 is very sensitive; its resolution is 1 volt at the standard measurement distance of 2"(about 5 cm). The meter is designed to effectively measure the magnitude and polarity of the surface voltage with greater clarity and speed than what has been possible before. The V 300 is ideal for measuring electrostatic charges in plastic, paper, packaging, textile, food, pharmaceutical, electronic, and other industries.

• Weight: 150 g
• Calibration: Factory calibrated to Indian standards, valid for 1 year
• Dimensions (in mm): 125 75 29 (L B H)
• Reset: Causes the display to set zero
• Power supply: Standard replaceable 9 V battery. "Low battery" display provided
• Test actuation: On/Off push button
• Accuracy: Typical maximum error is 20 percent of reading
• Display: High resolution 3.5 digit LCD display with polarity indication
• Range: 19.99 kV at 50 mm from object
• Accessories: Grounding cord 2 m

Swiss-made viscosity measurement and temperature control systems for water and solvent based inks. The values of various parameters are measured direcly in the ink supply line of the printing unit. This viscosity controller works on the dropping body measurement principle. The Fasnacht viscosity controler also has an efficient cleaning system, which ensures that the measuring unit and supply line can be cleaned automatically.

The purchase decisions of the modern-day FMCG consumer is dependant largely on the print quality of the packaging material. Uneven colour shades on the printed substrate is a commonly occurring phenomenon, resulting in low quality printed material - which might influence a buyer negatively. Ink viscosity plays a vital role in ensuring uniform colour shades across the printing substrate. Consistent printing and optimum use of ink and solvents can be realised only with stable viscosity.

The output signal from the ValstatSM20 online electrostatic charge sensors ( minimum 1, maximum 18 sensors) can be connected to one or more colour touch panel HMIs for remote or local continuous monitoring and analytics. The collected data is monitored and when the measured value exceeds the measurement range or a pre-set safety level, an alarm sounded. The collected data can be stored, retrieved and analysed.

Distinct from a hand-held meter that is used to periodically measure static charges, the ValstatSM20 is permanently fixed at the location where the target is to be monitored. Hence, variations in measurement due to different operators, location, and distance are completely eliminated. As a result, a real-time, accurate, and continuous signal proportional to the static charge is made available for further analytics and diagnostics. The discharge or neutralising effect of the static charge eliminator is efficiently monitored for continual safety, and preventive maintenance. Expensive man-hours for inspection, testing, and validation are also effectively reduced.

The Valstat V 300 is very sensitive; its resolution is 1 volt at the standard measurement distance of 2"(about 5 cm). The meter is designed to effectively measure the magnitude and polarity of the surface voltage with greater clarity and speed than what has been possible before. The V 300 is ideal for measuring electrostatic charges in plastic, paper, packaging, textile, food, pharmaceutical, electronic, and other industries.

• Weight: 150 g
• Calibration: Factory calibrated to Indian standards, valid for 1 year
• Dimensions (in mm): 125 75 29 (L B H)
• Reset: Causes the display to set zero
• Power supply: Standard replaceable 9 V battery. "Low battery" display provided
• Test actuation: On/Off push button
• Accuracy: Typical maximum error is 20 percent of reading
• Display: High resolution 3.5 digit LCD display with polarity indication
• Range: 19.99 kV at 50 mm from object
• Accessories: Grounding cord 2 m