Our Products
Dryers
1 Products availableCoating Machine
1 Products availablePulleys
1 Products availableKitchenware And Cookware
1 Products availableTextile Machinery
1 Products availableOur Complete range of products are DOUBLE HEAD PRINTING MACHINE, SINGLE HEAD PRINTING MACHINE, star ager machine and S.S. STEAMER FABRICATED.
Transferred Printing Machine size 60x 40 Single head Bed type fabricated on Italy technique with Heating Printing area 60x40. Heater Load 10 KW and 2 H.P. Motor with Electric panel and Hydraulic system fitted with Japanese Pump and valve etc. Printing Head complete Machining & grinded.
Transferred Printing Machine size 30x40 Single head Bed type fabricated on Italy technique with Heating Head Printing area 30x40. Heater Load 10 KW and 2 H.P. Motor with Electric Control panel and Hydraulic system fitted with Japanese Pump and valve etc. Printing Head complete Machining & grinded.
FABRIC FEEDER |
Fabric unwinding device with fabric tension roller for fabric rolls. |
COATING PADDING |
Stainless steel Coating/Padding unit. This unit could handle all fabric of width up 1600-1800mm depends on machine model. The Speeds of Coating/Padding and speed of fabric are adjustable according to used fabric with SS liquid tank for Padding formula. |
DRYER |
The dryer is infrared, double walled and is fully insulated to minimize any heat loss. The heating and regulation are controlled via a digital temperature controller situated on the electrical cabinet. Small exhaust fan is situated on top of dryer. |
BATCHING |
Fabric re-winder can accommodate rolls Upto 250 mm diameter and includes speed control. |
S.S. Drying range 8 Sylinder S.S. 72" to 120" x 30" OD Fabricated of Heavey Duty M.S. Structure with 3 Nos. Cylinders Teflon coated with Ball bearing and chain system with 2 - 8.3 Bowl Mangal Machine pneumatic made of one rubber and one Ebonite 72" x 10" DC Motor 5 HP with Dancing Roll unit complete. |
Transferred Printing Machine size 60x 40 Single head Bed type fabricated on Italy technique with Heating Printing area 60x40. Heater Load 10 KW and 2 H.P. Motor with Electric panel and Hydraulic system fitted with Japanese Pump and valve etc. Printing Head complete Machining & grinded.
Transferred Printing Machine size 30x40 Single head Bed type fabricated on Italy technique with Heating Head Printing area 30x40. Heater Load 10 KW and 2 H.P. Motor with Electric Control panel and Hydraulic system fitted with Japanese Pump and valve etc. Printing Head complete Machining & grinded.
SUKHEEJA ENGG. WORKS are Manufacturer of All types of Transfer Printing Machine, Textile Processing Machinery, Thermo pack, Jet Dyeing, Drying Range, Felt Calender Machine, Merceriser, Jiggers, Opened & Closed Winches, Open Stanter, Pedding Mangle, Star Ager, All Types of Fabrication Works. | |||||
|
TECHNICAL DATA |
||||||||||||||||||||||
|
H.T.H.P. SOFT-OVERFLOW DYEING MACHINE (200 kg. & 300 kg. TWO COMPARTMENT) | ||||
Normal Capacity | 200kg. | 300kg. | 400kg. | 600kg. |
LIQUOR RATIO |
||||
A. POLYESTER B.POLYVISCOS C. 100% COTTON D.TERRYTOWEL |
1:4 1:6 1:8 1.10 |
1:4 1:6 1:8 1.10 |
1:4 1:6 1:8 1.10 |
1:4 1:6 1:8 1.10 |
MAXIMUM WORKING PRESSURE | 3.5 KG. | 3.5 KG. | 3.5 KG. | 3.5 KG. |
NOZZLE PRESSURE |
0.5 to 1.2 kg/cm2 |
0.5 to 1.2 kg/cm2 |
0.5 to 1.2 kg/cm2 |
0.5 to 1.2 kg/cm2 |
MAXIMUM WORKING TEMPERATURE |
140°C |
140°C |
140°C |
140°C |
MAXIMUM WORKING TEMPERATURE ATMOSPHERIC |
90°C |
90°C |
90°C |
90°C |
HEATING RATE | 25°C TO 100°C average 5°C/mm., 100°C TO 135°C average 2.5°C/mm. (AT DRY SATURATED STEAM PRESSURE 6 kg./cm2) | |||
COOLING RATE | 135°C TO 100°C average 3°c/mm., 100°C TO 80°C average 2°G/min. 7.5 HP (WATER SUPPLY NOT HIGHER THAN 30°C AT 2.0 kg/cm2) | |||
MAIN MOTOR |
7.5 HP |
7.5 HP |
10 HP |
10 HP |
TOTAL CONNECTED LOAD |
10 HP |
10 HP |
10 HP |
10 HP |
S.S Winch Machine
Size Of S.S. Tank | : | 1)60"x65" |
2)72"x66" | ||
3)96"x72" | ||
Depth Of Tank | : | 36" |
Fish Type Reel | : | 23"x12" |
Round Reel | : | 7" O.D. |
Motor | : | 2 H.P./ 3 H.P. |
S.S. TANK IS FABRICATED FROM 16 GAUGE 304 QUALITY STAINLESS STEEL SHEET FIXED IN 2"M.S. ANGLE STRUCTURE (FRAME) FITTED WITH 1 NO. S.S. REEL MOUNTED WITH BEARING ON C.I. STAND WITH 1 NO ROUNDED REEL 7" O.D. FABRICATED OF S.S. PIPE 1" O.D. 304 QUALITY 16 S.W.G. WITH ONE NO. PARTITION PIPE DIVIDED INTO 7, 9 PART AND PERFORATED SHEET AND STEAM PIPE, DRIVEN BY MOTOR AND SPEED REDUCTION GEAR BOX 30:1 RATIO.
OUE MANUFACTURING RANGE: | |
CURING MACHINE (POLYMERIZER) THERMO PAC. SEMI DYEING JIGGER, JUMBO JIGGER EINCH MACHINE, PADDING MANGLE POWER & HAND DRIVEN, DRYEING RANGE S.S. BATHING TROLLIES, FELT CALENDER MACHINE. |
SPECIFICATION | |
TOTAL HEIGHT : 8WIDTH : 4", 5" | |
OUR MANUFACTURING RANGE | |
CURING MACHINE(POLYMERIZER) THERMO PAC, SEMI DYEING JIGGER, JUMBO JIGGER WINCH MACHINE, PADDING MANGLE POWER & HAND DRIVEN, DRYING RANGE S.S. BATHING TROLLIES , FELT CALENDER MACHINE. |
Fabricated for digital printing
36"x36"x90"
Fabricated from 5.5 x 30" sheet
Capacity - 100 Mtr
String pressor 2.5 Kg./-
Electric Steamer Fabricated from S.S. Tubler Steaming chamber capacity 25 mtr. loading with internal SS steam jacket, insulation with Ceramic wool covered with M.S. Sheet with Perforated Roll for warping of cloth to be Steamed Fabric with SS Boiler water filling pump and receptive cock with water filling cane and with temperature sensor and boiler complete with electric heaters (3 kw) with control panel etc. |