Our Products
Roll Forming & Bending Machines
2 Products availableMetal & Metal Products
1 Products availableGrinders, Drills & Power Tools
1 Products availableSurface Finishing Machines
1 Products availableLathe Machines
1 Products availableCutting Machine
1 Products availableGrinding Machine
1 Products availableNoodles Making Machine
1 Products availableMachine And Precision Tools
1 Products availableWe are the main supplier of this product.
Details
Specifications | Sizes | |||||||
---|---|---|---|---|---|---|---|---|
Maximum length of stroke | 8 | 10 | 12 (L) | 12 (H) | 14 | 16 | 18 | 20 |
Length of Ram | 20" | 30" | 30" | 40" | 40" | 42" | 42" | 52" |
Width of ram | 6" | 8" | 8" | 9" | 9" | 9" | 9" | 12" |
Length of Ram baring | 14" | 20" | 22" | 26" | 26" | 26" | 26" | 36' |
No. of speeds to ram by gear box | 2 | 2 | 4 | 4 | 4 | 4 | 4 | 4 |
Maximum diameter of work admitted | 20" | 32" | 36" | 48" | 48" | 48" | 48" | 72" |
Maximum height of work admitted | 7" | 9" | 11" | 15" | 18" | 20" | 22" | 24" |
Longitudinal traverse of table | 9" | 15" | 18" | 24" | 24" | 24" | 24" | 36" |
Transverse traverese of table | 10" | 12" | 15" | 18" | 18" | 18" | 18" | 24" |
diameter of circular table | 12" | 15" | 18" | 24" | 24" | 24" | 24" | 42" |
Horse power required | 1 H.P. | 2 H.P. | 3 H.P. | 5 H.P. | 5 H.P. | 7.5 H.P. | 7.5 H.P | |
Approx weight of casting | 1 H.P. | 2 H.P. | 3 H.P. | 5 H.P. | 5 H.P. | 7.5 H.P. | 7.5 H.P | 50 Qnt. |
Divinding arrangement | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Technical Specifications
Size | 8 ft. | 10 ft. | 12 ft. | 14 ft. | 16 ft. |
---|---|---|---|---|---|
Length of Bed | 8'-3" | 10'-3" | 12'-3" | 14"-3" | 16'-3" |
Width of Bed | 16" | 18" | 20" | 22" | 22" |
Centre Height | 13" to 14" | 15" to 16" | 17" to 18" | 19" to 20" | 19" to 20" |
Spindle Bore | 3-1/8" | 3-5/8" | 3-5/8" | 4-1/8" | 4-1/8" |
Admit between Centre | 58" | 78" | 96" | 114" | 132" |
Swing over Saddle | 15" | 16" | 17" | ||
Swing in the gap | 21" to 22" | 23" to 24" | 25" to 26" | 27" to 28" | 27" to 28" |
No. of Speeds | 6 | 6 | 6 | 6 | 6 |
Diameter of Lead Screw | 1-3/4" | 2" | 2" | 2-1/4" | 2-5/8" |
Lead Screw Pitch | 2 T.P.I. | 2 T.P.I. | 2 T.P.I. | 2 T.P.I. | 2 T.P.I. |
H.P. Required | 3 H. P. | 3 H. P. | 5 H.P. | 5 H.P. | 5 H.P. |
Technical Specifications
Inch | Inch | mm | Inch | mm | Inch | mm | Inch | Inch | |
Size | 12" | 18" | 455 | 24" | 610 | 30" | 760 | 36" | 40" |
Maximum Stroke | 14" | 20" | 505 | 26" | 660 | 32" | 810 | 38" | 42" |
Length of Ram | 27" | 40" | 1016 | 51" | 1291 | 61" | 1498 | 75" | 82" |
Maximum Distance of Table to Ram | 12" | 15" | 381 | 18" | 457 | 18" | 457 | 21" | 24" |
Miniimum Distance of Table to Ram | 2" | 2" | 51 | 2" | 51 | 2" | 51 | 3" | 3" |
Maximum Vertical Travel of Tool Slide | 5" | 6" | 152 | 7½ | 190 | 7½ | 190 | 8" | 10" |
Length & Width of Table Top | 12x9" | 18"11" | 457x305 | 24"x14' | 610x356 | 30"x16" | 762x407 | 38"x18" | 40"x20" |
Length & Width of Table Slide | 10"x8" | 15"x11 | 381x280 | 24"x14" | 503x353 | 24"15" | 607x381 | 36"x16" | 40"x17" |
Length of cross Slide | 24" | 32" | 811x241 | 37" | 938 | 40" | 1016 | 54" | 55" |
Width of Ram | 8½ | 9½ | 12" | 305 | 12" | 305 | 13" | 15" | |
No. of Speeds | 3 | 3 | 4 | 4 | 4 | 4 | |||
No. of Speeds in case of all Geared | 4 | 4 | 254 | 6 | 330 | 14" | 356 | 16" | 16" |
Vice admits | 8" | 10" | 1473x1016 | 13 | 1719x1219 | 78"x53" | 1979x1346 | 82"x60" | 88"x65" |
Floor space required | 58"x48" | 58"x40" | 70"x48" | 2190 | 2640 | 3280 | |||
Net of the Machine in Kgs. | 850 | 1419 | 1960 | 3 H.P. | 3 H.P. | 5 H.P. | |||
H.P. of Electric Motor | 1 H.P. | 1 H.P. | 2 H.P. | 2 H.P. |
Technical Specifications
Model | SU 4 | SU 6 | SU 8 | SU 10 | SU 12 | SU 14 | SU 16 | SU 20 | SU 30 | SU 40 |
---|---|---|---|---|---|---|---|---|---|---|
Stroke of Machine | 1220 | 1830 | 2440 | 3050 | 3660 | 4270 | 4880 | 6000 | 9000 | 18000 |
Length of Bed | 1850 | 2750 | 3700 | 4600 | 5500 | 6450 | 7400 | 9000 | 18000 | 36000 |
Planing Width | 800 | 915 | 1220 | 1370 | 1525 | 1525 | 1525 | 1525 | 1525 | 1525 |
Planing Height | 800 | 915 | 1220 | 1370 | 1525 | 1525 | 1525 | 1525 | 1525 | 1525 |
Width of Table | 600 | 600 | 750 | 800 | 900 | 900 | 900 | 1000 | 1000 | 1000 |
H.P. Recomended | 1 | 2 | 5 | 7.5 | 10 | 12.5 | 15 | 20 | 25 | 30 |
Technical Specifications
Drilling capacity in steel | 1" | 114" | 1"12" | 2" |
---|---|---|---|---|
Maximum distance from spindle to column | 24" | 32" | 34" | 48" |
Mimmum distance from spindle to column | 10" | 12" | 13" | 18" |
Maximum distance from spindle to base plate | 30" | 34" | 42" | 50" |
Mlmmum distance from spindle to base plate | 0" | 0" | 0" | 0" |
Diameter of column | 6" | 7½ | 9" | 10" |
No. of spindle speed | 4 Single 4 Double | 3 Single 3 Double | 4x2 (with two 3 single speeds gear box) Double | 3 Single 3 Double |
Range of Spindle speed | 80-700 RPM | 80-700 RPM | 60-700 RPM | 50-700 RPM |
Working surface of base plate | 9" | 11" | 13" | 15" |
Travel of spindle | 6" | 8" | 9" | 12" |
Spindle morse Taper No. | 3 | 4 | 4 | 5 |
Vertical adjustment of arm | 15" | 18" | 21" | 24" |
Over all Height | 60" | 70" | 78" | 90" |
Arm tilt to any angle upto | 90" | 90" | 90" | 90" |
Floor space required | 40" x 24" | 44"x25" | 55"x30" | 65"x40" |
Net weight approximate | 6 antis | 9 antis | 15 antis | 25 antis |
Eleclncals Motor required | 1 H.P | 2H.P | 3H.P. | 5H.P. |