SUCCESS EQUIPMENTS & MARKETING

Gandhidham, Kutch, ..

• Wing Nut Test Plugs cast iron.
• Logiball Multisize Plugs reinforced rubber.
• Cherne Test Plugs Test Ball Plugs and Muni-Ball Plugs.
• Lansas Plugs, Balls, Domehead and Flowthru or Leak Locator Plugs.

• Wraps around the pipe and forms a continuous roller surrounding the pipes lower half.
• For pipe from 2" to 60" (60.3 mm 1524 mm) in diameter.
• Pipe can be kept close to the ground allowing operators more control and mobility.
• Polyurethane rollers make it ride easily over weld seams and eliminate pipe coating damage.

• Pull-type, non-powered Pneumatic Internal Line up Clamp
• For welding small diameter steel pipe from 6 18 (168.3 457.2 mm)
• Air reservoir tank
• Independent front and rear line up heads
• 40 feet of reach rod and control ends

• Ensure a smooth circumferential weld internally in the pipe.
• Patented system operates independently between the front and rear clamping mechanisms of SEM Line-up Clamps.
• Supports the weld pool.
• Each copper shoe is designed to fully contact the internal surface of the pipe.

• A modular permanent seal for any pipe through walls, floors and casing.
• Installation takes less than 5 minutes.
• Expands around the space to create a gas and water tight seal.
• Resists aging, ozone, sunlight, water and a wide range of chemicals, extreme high 400F (204.44C) and low -60 F (-51C) temperatures.
• Eliminates metal to metal contact preventing galvanic corrosion.
• Reduces pipe failures due to fatigue at welds, flanges and threaded connections.

• For pipe sizes from 04(114.3 mm) up to 48(1219.2 mm)
• Designed for high production bending of steel pipe of various wall thickness.
• Can be custom manufactured with standard or Heavy-Duty features.
• Control panel with gauges and automatic emergency shutoff that allows the operator to monitor the full bending action and be in total control at all times.
• Safety steel plate protects operator at control panel
• Powered by a CAT Turbo diesel engine or Deutz air-cooled diesel engine with electric start end emergency
• Shutdown
• Indicator rod for bend measurement
• Hydraulic pressure supplied by a hydraulic pump and controlled by a manual three spool valve bank
• Large capacity fuel and hydraulic tanks with cooling baffles
• Hydraulic drive pipe movement winch
• Fully mobile with rubber tires or steel tracks with a hydraulic towing tongue
• Equipped with (removable) polyurethane liners for externally coated pipe

• Attach cathodic protection leads to pipes, tanks and structures.
• Comes with a variety of cathodic protection connections and accessories.
• Everything required making a good quality cadweld connection.

SEM Air Compressors are designed for use with SEMs pneumatic equipment and come complete with self-contained skid cages.
Available in three models.

Model325:

For use with pull style clamps and mandrels up to 18" (457.2 mm).
Gasoline engine with electric start (electric motor driven optional).

Model370:

For use with all self-propelled clamps and mandrels up to 32" (812.8 mm).
Diesel engine with electric start (gasoline engine or electric motor driven optional).

• Bends pipe easily and economically
• Easily mounted on side boom-equipped tractors
• Bends pipe from 2 to 8 (50 mm 203.2 mm) in diameter
• Comes with mount and pin

• High volume centrifugal pump that handles mud, debris and water without clogging.
• It can discharge up to 2166 GPM (8199 LPM) and is Narrow to fit easily into a normal ditch.
• Comes with your choice of a gasoline or diesel engine.
• Large impeller turns at low RPM with non clogging inlets above and below impeller
• Works in water to 42-inch depth (107 cm)
• Draws down to within 3 inches (8 cm) of bottom Few moving parts to reduce maintenance.
• Easy servicing
• Drains automatically to prevent freezing
• Self-priming uses no suction hose
• Rugged welded square tube construction.

• Electronic pig tracking and locating system.
• Senses and signals passage of a Spy Pig Tracker equipped pig.

• Designed to spread all types of flanged pipe connections to insert blinds, gaskets and orifices.
• Quick and easy removal of defective gaskets and the installation of new gaskets.
• Maximize safety, no hammers, chisels or wedges needed.
• Simple to use and position, Speeds up repair time.
• Lightweight, easy to carry and assemble, ready to operate in seconds.

• Comes with a two speed hand pump or a foot pump.
• Hydraulic, easily overcomes, high tension on the flanges and opens them to give space for renewal of the packing.
• Spreader jaws automatically follow the spread of the flanges.
• Automatic change over from 1st to 2nd stage.
• Automatic air vent valve on reservoir.
• For big flanges a number of spreaders can be used.
• Special wedges are available for exceptionally wide packing gaps.
• Powerful, easy to mount, lightweight.
• Packed, complete with accessories in a handy steel carrying case

• Stem-type seat mechanism that closes with the impact of inlet pressure. Dense, die-forged bodies and spring housing caps provide maximum strength and safety.
• Large range of pressure regulators and reverse flow check valves.
• Combined regulators and reverse flow check valves gas manifolds also available.

1. Lightweight, stackable for easy handling, transportation and storage
2. One plastic pipe stand will replace several wooden skids.
3. Comes in three sizes from 2"- 24" (60.3 mm 609.6 mm) (unit weight 10 lbs., 18 lbs., 42 lbs.)

• Best manual cutter for ductile iron and isrecommended for large diameter cast iron and steelpipe 5" to 34" pipe diameter (127 mm to 863.6 mm)
• Use the same cutter wheels for all size pipe Steel Wheels will cutup to .781 (19.84 mm) wall thickness.
• Great for cold cuts, fast setup and cutting in close quarters.
• Needs 4 8 (101.8 mm to 203.2 mm) clearance around pipe.

• Flexible, expandable and compressible.
• Manufactured from the highest quality polyurethane.
• Very durable and tear resistant makes a super seal.
• Safe in extreme hot and cold temperatures.
• Used for pigging, dewatering, hydro-static testing, batching, removing paraffin wax .
• Comes in various lengths depending on the number of discs and/or cups required.

• Crawler works with all sizes of beveling bands for 6" pipe and above.
• Accurately cuts and bevels pipe to any beveling requirement
• Mounts easily anywhere on the pipe.
• Crawlers have flexible 9' drive shaft standard; flexible 14' drive shaft for larger diameter pipe.
• No need for out-of-round pipe attachments.
• Motorized drive optional.

• Low pressure Inflatable Gas Bags.
• Designed to inflate to the exact diameter of the pipe to block dangerous fumes or gases from coming forward during repair of an active pipeline.
• Varying gauges of rubber and polyester depending on the size.
• Pressure gauges available.
• Optional flame retardant cover and nitrile rubber bladder.v

• Technology that combines the case, probe and electrode configuration with new generation solid-state circuitry.
• Simplified and more efficient.

• Compact, lightweight - no bulky battery packs.
• Uses standard 9-V battery and flat sponge electrode.
• Optional high speed roller.

• A 50 mil cold applied tape coating for in serve temperature of 120f. (48.89C).
• It is used for coating pipe, pipe joints, fittings, couplings, tanks, cable and other metal surfaces.
• Application can be by hand or machine while removing the release liner and spirally wrapping with a minimum overlap.

• Four-wheel cutter that cuts steel, cast iron and ductile iron pipe(1" thru 12" pipe diameter).
• 4 clearance around pipe
• Tough guide fingers ensue perfect alignment for square cuts
• A closed 360 frame allows efficient cutting

• Best manual cutter for ductile iron and isrecommended for large diameter cast iron and steelpipe 5" to 34" pipe diameter (127 mm to 863.6 mm)
• Use the same cutter wheels for all size pipe Steel Wheels will cutup to .781 (19.84 mm) wall thickness.
• Great for cold cuts, fast setup and cutting in close quarters.
• Needs 4 8 (101.8 mm to 203.2 mm) clearance around pipe.

• Features :
• Easily handle pipe from 2 (60.3mm) through to 48 (1, 219mm) in diameter
• Light weight
• Urethane roller protect pipe coatingv

• Constructed of durable and lightweight hard-anodized aluminum.
• For cutting and beveling 2" to 48" diameter pipe
• Quick operating boomer assembly securely locks the machine to the pipe for an entire 360 rotation; No repositioning necessary.
• Patented H&M Cuboids Spacer System keeps the spacers on the machine to minimize set up time and post spacers.

• Bends pipe easily and economically
• Easily mounted on side boom-equipped tractors
• Bends pipe from 2 to 8 (50 mm 203.2 mm) in diameter
• Comes with mount and pin

• Check your detectors voltage output with different voltage jeepmeters.
• Model JM features a digital display and measures up to 40 kv.
• Model PJM jeepmeters are pocket size that measure 0 20 kv.

• Made of high tensile steel complete with rugged Teflon inserts, tested and load rated for safety.
• Specially designed for fast hook-up
• Comes in sizes from 3"to 48" (88.9 mm 1219.2 mm) .

• A heavy duty joint and hand wrap coating tape designed for hand wrapping field joints, fittings, ells and tees.
• Compatible with coal tar, fusion bond epoxy, asphalt and polyethylene pipeline coatings.
• Available in four thicknesses for both small and large diameter pipe.

• Wide selections to choose from General or Special Purpose.
• Use series 1 cutting tips.
• For use with acetylene and other pressurized gases.
• Equipped with reverse flow check valves.

• High performance coatings that have excellent resistance to cathodic disbondment
• High electrical resistivity
• Easy to apply, fast setting and low cos

• All components are made from top-grade material including alloy steel end irons and abrasion resistant nylon, coated for better wear resistance.
• Strong, lightweight and flexible for maximum ease of handling
• Liftex also offers Lined Steel Choker Belt, steel-lined fabric-faced belts that holds the pipe firmly in place with no slippage.

• Available in 10, 12 and 20mil thickness for use on small diameter pipe joint, tees and ells.
• Can be applied by hand but machine application recommended.

• Safety in separating pipe and ring-type-joint flanges
• Handles ASA raised face, ring-type-joint and cast iron flanges.
• Only require few sizes to handle all flanges
• Compact, light and easy to carry.
• Prevents safety incidents.
• Comes in 7 lb. to 20 lb. weights.

separating pipe a

• Stem-type seat mechanism that closes with the impact of inlet pressure. Dense, die-forged bodies and spring housing caps provide maximum strength and safety.
• Large range of pressure regulators and reverse flow check valves.
• Combined regulators and reverse flow check valves gas manifolds also available.

• Lightweight, stackable for easy handling, transportation and storage
• One plastic pipe stand will replace several wooden skids.
• Comes in three sizes from 2"- 24" (60.3 mm 609.6 mm) (unit weight 10 lbs., 18 lbs., 42 lbs.)

• Fast, safe and economical
• Made with rubber belting over strong wire rope.
• Self-releasing belt automatically unhooks after pipe is landed.

• Accurately control the bending of pipe to your specifications.
• Rugged built for the toughest of conditions, are quick to set-up and use.
• Available in sizes 2 to 12 (50 mm 304.8 mm) in diameter.