• Wing Nut Test Plugs cast iron.
• Logiball Multisize Plugs reinforced rubber.
• Cherne Test Plugs Test Ball Plugs and Muni-Ball Plugs.
• Lansas Plugs, Balls, Domehead and Flowthru or Leak Locator Plugs.

• Wraps around the pipe and forms a continuous roller surrounding the pipes lower half.
• For pipe from 2" to 60" (60.3 mm 1524 mm) in diameter.
• Pipe can be kept close to the ground allowing operators more control and mobility.
• Polyurethane rollers make it ride easily over weld seams and eliminate pipe coating damage.

• Pull-type, non-powered Pneumatic Internal Line up Clamp
• For welding small diameter steel pipe from 6 18 (168.3 457.2 mm)
• Air reservoir tank
• Independent front and rear line up heads
• 40 feet of reach rod and control ends

• Ensure a smooth circumferential weld internally in the pipe.
• Patented system operates independently between the front and rear clamping mechanisms of SEM Line-up Clamps.
• Supports the weld pool.
• Each copper shoe is designed to fully contact the internal surface of the pipe.

• A modular permanent seal for any pipe through walls, floors and casing.
• Installation takes less than 5 minutes.
• Expands around the space to create a gas and water tight seal.
• Resists aging, ozone, sunlight, water and a wide range of chemicals, extreme high 400F (204.44C) and low -60 F (-51C) temperatures.
• Eliminates metal to metal contact preventing galvanic corrosion.
• Reduces pipe failures due to fatigue at welds, flanges and threaded connections.

• For pipe sizes from 04(114.3 mm) up to 48(1219.2 mm)
• Designed for high production bending of steel pipe of various wall thickness.
• Can be custom manufactured with standard or Heavy-Duty features.
• Control panel with gauges and automatic emergency shutoff that allows the operator to monitor the full bending action and be in total control at all times.
• Safety steel plate protects operator at control panel
• Powered by a CAT Turbo diesel engine or Deutz air-cooled diesel engine with electric start end emergency
• Shutdown
• Indicator rod for bend measurement
• Hydraulic pressure supplied by a hydraulic pump and controlled by a manual three spool valve bank
• Large capacity fuel and hydraulic tanks with cooling baffles
• Hydraulic drive pipe movement winch
• Fully mobile with rubber tires or steel tracks with a hydraulic towing tongue
• Equipped with (removable) polyurethane liners for externally coated pipe

• Attach cathodic protection leads to pipes, tanks and structures.
• Comes with a variety of cathodic protection connections and accessories.
• Everything required making a good quality cadweld connection.

SEM Air Compressors are designed for use with SEMs pneumatic equipment and come complete with self-contained skid cages.
Available in three models.

Model325:

For use with pull style clamps and mandrels up to 18" (457.2 mm).
Gasoline engine with electric start (electric motor driven optional).

Model370:

For use with all self-propelled clamps and mandrels up to 32" (812.8 mm).
Diesel engine with electric start (gasoline engine or electric motor driven optional).

• Bends pipe easily and economically
• Easily mounted on side boom-equipped tractors
• Bends pipe from 2 to 8 (50 mm 203.2 mm) in diameter
• Comes with mount and pin

• High volume centrifugal pump that handles mud, debris and water without clogging.
• It can discharge up to 2166 GPM (8199 LPM) and is Narrow to fit easily into a normal ditch.
• Comes with your choice of a gasoline or diesel engine.
• Large impeller turns at low RPM with non clogging inlets above and below impeller
• Works in water to 42-inch depth (107 cm)
• Draws down to within 3 inches (8 cm) of bottom Few moving parts to reduce maintenance.
• Easy servicing
• Drains automatically to prevent freezing
• Self-priming uses no suction hose
• Rugged welded square tube construction.

• Electronic pig tracking and locating system.
• Senses and signals passage of a Spy Pig Tracker equipped pig.

• Designed to spread all types of flanged pipe connections to insert blinds, gaskets and orifices.
• Quick and easy removal of defective gaskets and the installation of new gaskets.
• Maximize safety, no hammers, chisels or wedges needed.
• Simple to use and position, Speeds up repair time.
• Lightweight, easy to carry and assemble, ready to operate in seconds.

• Comes with a two speed hand pump or a foot pump.
• Hydraulic, easily overcomes, high tension on the flanges and opens them to give space for renewal of the packing.
• Spreader jaws automatically follow the spread of the flanges.
• Automatic change over from 1st to 2nd stage.
• Automatic air vent valve on reservoir.
• For big flanges a number of spreaders can be used.
• Special wedges are available for exceptionally wide packing gaps.
• Powerful, easy to mount, lightweight.
• Packed, complete with accessories in a handy steel carrying case

1. Lightweight, stackable for easy handling, transportation and storage
2. One plastic pipe stand will replace several wooden skids.
3. Comes in three sizes from 2"- 24" (60.3 mm 609.6 mm) (unit weight 10 lbs., 18 lbs., 42 lbs.)

• Best manual cutter for ductile iron and isrecommended for large diameter cast iron and steelpipe 5" to 34" pipe diameter (127 mm to 863.6 mm)
• Use the same cutter wheels for all size pipe Steel Wheels will cutup to .781 (19.84 mm) wall thickness.
• Great for cold cuts, fast setup and cutting in close quarters.
• Needs 4 8 (101.8 mm to 203.2 mm) clearance around pipe.

• Flexible, expandable and compressible.
• Manufactured from the highest quality polyurethane.
• Very durable and tear resistant makes a super seal.
• Safe in extreme hot and cold temperatures.
• Used for pigging, dewatering, hydro-static testing, batching, removing paraffin wax .
• Comes in various lengths depending on the number of discs and/or cups required.

• Crawler works with all sizes of beveling bands for 6" pipe and above.
• Accurately cuts and bevels pipe to any beveling requirement
• Mounts easily anywhere on the pipe.
• Crawlers have flexible 9' drive shaft standard; flexible 14' drive shaft for larger diameter pipe.
• No need for out-of-round pipe attachments.
• Motorized drive optional.

• Low pressure Inflatable Gas Bags.
• Designed to inflate to the exact diameter of the pipe to block dangerous fumes or gases from coming forward during repair of an active pipeline.
• Varying gauges of rubber and polyester depending on the size.
• Pressure gauges available.
• Optional flame retardant cover and nitrile rubber bladder.v

• Technology that combines the case, probe and electrode configuration with new generation solid-state circuitry.
• Simplified and more efficient.

• Compact, lightweight - no bulky battery packs.
• Uses standard 9-V battery and flat sponge electrode.
• Optional high speed roller.

• Four-wheel cutter that cuts steel, cast iron and ductile iron pipe(1" thru 12" pipe diameter).
• 4 clearance around pipe
• Tough guide fingers ensue perfect alignment for square cuts
• A closed 360 frame allows efficient cutting

• Best manual cutter for ductile iron and isrecommended for large diameter cast iron and steelpipe 5" to 34" pipe diameter (127 mm to 863.6 mm)
• Use the same cutter wheels for all size pipe Steel Wheels will cutup to .781 (19.84 mm) wall thickness.
• Great for cold cuts, fast setup and cutting in close quarters.
• Needs 4 8 (101.8 mm to 203.2 mm) clearance around pipe.

• Features :
• Easily handle pipe from 2 (60.3mm) through to 48 (1, 219mm) in diameter
• Light weight
• Urethane roller protect pipe coatingv

• Constructed of durable and lightweight hard-anodized aluminum.
• For cutting and beveling 2" to 48" diameter pipe
• Quick operating boomer assembly securely locks the machine to the pipe for an entire 360 rotation; No repositioning necessary.
• Patented H&M Cuboids Spacer System keeps the spacers on the machine to minimize set up time and post spacers.

• Bends pipe easily and economically
• Easily mounted on side boom-equipped tractors
• Bends pipe from 2 to 8 (50 mm 203.2 mm) in diameter
• Comes with mount and pin

• Check your detectors voltage output with different voltage jeepmeters.
• Model JM features a digital display and measures up to 40 kv.
• Model PJM jeepmeters are pocket size that measure 0 20 kv.

• Made of high tensile steel complete with rugged Teflon inserts, tested and load rated for safety.
• Specially designed for fast hook-up
• Comes in sizes from 3"to 48" (88.9 mm 1219.2 mm) .

• A heavy duty joint and hand wrap coating tape designed for hand wrapping field joints, fittings, ells and tees.
• Compatible with coal tar, fusion bond epoxy, asphalt and polyethylene pipeline coatings.
• Available in four thicknesses for both small and large diameter pipe.

• Wide selections to choose from General or Special Purpose.
• Use series 1 cutting tips.
• For use with acetylene and other pressurized gases.
• Equipped with reverse flow check valves.

• High performance coatings that have excellent resistance to cathodic disbondment
• High electrical resistivity
• Easy to apply, fast setting and low cos

• All components are made from top-grade material including alloy steel end irons and abrasion resistant nylon, coated for better wear resistance.
• Strong, lightweight and flexible for maximum ease of handling
• Liftex also offers Lined Steel Choker Belt, steel-lined fabric-faced belts that holds the pipe firmly in place with no slippage.

• Safety in separating pipe and ring-type-joint flanges
• Handles ASA raised face, ring-type-joint and cast iron flanges.
• Only require few sizes to handle all flanges
• Compact, light and easy to carry.
• Prevents safety incidents.
• Comes in 7 lb. to 20 lb. weights.

separating pipe a

• Stem-type seat mechanism that closes with the impact of inlet pressure. Dense, die-forged bodies and spring housing caps provide maximum strength and safety.
• Large range of pressure regulators and reverse flow check valves.
• Combined regulators and reverse flow check valves gas manifolds also available.

• Lightweight, stackable for easy handling, transportation and storage
• One plastic pipe stand will replace several wooden skids.
• Comes in three sizes from 2"- 24" (60.3 mm 609.6 mm) (unit weight 10 lbs., 18 lbs., 42 lbs.)

• Fast, safe and economical
• Made with rubber belting over strong wire rope.
• Self-releasing belt automatically unhooks after pipe is landed.

• Accurately control the bending of pipe to your specifications.
• Rugged built for the toughest of conditions, are quick to set-up and use.
• Available in sizes 2 to 12 (50 mm 304.8 mm) in diameter.

• Wing Nut Test Plugs cast iron.
• Logiball Multisize Plugs reinforced rubber.
• Cherne Test Plugs Test Ball Plugs and Muni-Ball Plugs.
• Lansas Plugs, Balls, Domehead and Flowthru or Leak Locator Plugs.

• Wraps around the pipe and forms a continuous roller surrounding the pipes lower half.
• For pipe from 2" to 60" (60.3 mm 1524 mm) in diameter.
• Pipe can be kept close to the ground allowing operators more control and mobility.
• Polyurethane rollers make it ride easily over weld seams and eliminate pipe coating damage.

• Pull-type, non-powered Pneumatic Internal Line up Clamp
• For welding small diameter steel pipe from 6 18 (168.3 457.2 mm)
• Air reservoir tank
• Independent front and rear line up heads
• 40 feet of reach rod and control ends

• Ensure a smooth circumferential weld internally in the pipe.
• Patented system operates independently between the front and rear clamping mechanisms of SEM Line-up Clamps.
• Supports the weld pool.
• Each copper shoe is designed to fully contact the internal surface of the pipe.

• A modular permanent seal for any pipe through walls, floors and casing.
• Installation takes less than 5 minutes.
• Expands around the space to create a gas and water tight seal.
• Resists aging, ozone, sunlight, water and a wide range of chemicals, extreme high 400F (204.44C) and low -60 F (-51C) temperatures.
• Eliminates metal to metal contact preventing galvanic corrosion.
• Reduces pipe failures due to fatigue at welds, flanges and threaded connections.

• For pipe sizes from 04(114.3 mm) up to 48(1219.2 mm)
• Designed for high production bending of steel pipe of various wall thickness.
• Can be custom manufactured with standard or Heavy-Duty features.
• Control panel with gauges and automatic emergency shutoff that allows the operator to monitor the full bending action and be in total control at all times.
• Safety steel plate protects operator at control panel
• Powered by a CAT Turbo diesel engine or Deutz air-cooled diesel engine with electric start end emergency
• Shutdown
• Indicator rod for bend measurement
• Hydraulic pressure supplied by a hydraulic pump and controlled by a manual three spool valve bank
• Large capacity fuel and hydraulic tanks with cooling baffles
• Hydraulic drive pipe movement winch
• Fully mobile with rubber tires or steel tracks with a hydraulic towing tongue
• Equipped with (removable) polyurethane liners for externally coated pipe

• Attach cathodic protection leads to pipes, tanks and structures.
• Comes with a variety of cathodic protection connections and accessories.
• Everything required making a good quality cadweld connection.

SEM Air Compressors are designed for use with SEMs pneumatic equipment and come complete with self-contained skid cages.
Available in three models.

Model325:

For use with pull style clamps and mandrels up to 18" (457.2 mm).
Gasoline engine with electric start (electric motor driven optional).

Model370:

For use with all self-propelled clamps and mandrels up to 32" (812.8 mm).
Diesel engine with electric start (gasoline engine or electric motor driven optional).

• Bends pipe easily and economically
• Easily mounted on side boom-equipped tractors
• Bends pipe from 2 to 8 (50 mm 203.2 mm) in diameter
• Comes with mount and pin

• High volume centrifugal pump that handles mud, debris and water without clogging.
• It can discharge up to 2166 GPM (8199 LPM) and is Narrow to fit easily into a normal ditch.
• Comes with your choice of a gasoline or diesel engine.
• Large impeller turns at low RPM with non clogging inlets above and below impeller
• Works in water to 42-inch depth (107 cm)
• Draws down to within 3 inches (8 cm) of bottom Few moving parts to reduce maintenance.
• Easy servicing
• Drains automatically to prevent freezing
• Self-priming uses no suction hose
• Rugged welded square tube construction.

• Electronic pig tracking and locating system.
• Senses and signals passage of a Spy Pig Tracker equipped pig.

• Designed to spread all types of flanged pipe connections to insert blinds, gaskets and orifices.
• Quick and easy removal of defective gaskets and the installation of new gaskets.
• Maximize safety, no hammers, chisels or wedges needed.
• Simple to use and position, Speeds up repair time.
• Lightweight, easy to carry and assemble, ready to operate in seconds.

• Comes with a two speed hand pump or a foot pump.
• Hydraulic, easily overcomes, high tension on the flanges and opens them to give space for renewal of the packing.
• Spreader jaws automatically follow the spread of the flanges.
• Automatic change over from 1st to 2nd stage.
• Automatic air vent valve on reservoir.
• For big flanges a number of spreaders can be used.
• Special wedges are available for exceptionally wide packing gaps.
• Powerful, easy to mount, lightweight.
• Packed, complete with accessories in a handy steel carrying case

1. Lightweight, stackable for easy handling, transportation and storage
2. One plastic pipe stand will replace several wooden skids.
3. Comes in three sizes from 2"- 24" (60.3 mm 609.6 mm) (unit weight 10 lbs., 18 lbs., 42 lbs.)

• Best manual cutter for ductile iron and isrecommended for large diameter cast iron and steelpipe 5" to 34" pipe diameter (127 mm to 863.6 mm)
• Use the same cutter wheels for all size pipe Steel Wheels will cutup to .781 (19.84 mm) wall thickness.
• Great for cold cuts, fast setup and cutting in close quarters.
• Needs 4 8 (101.8 mm to 203.2 mm) clearance around pipe.

• Flexible, expandable and compressible.
• Manufactured from the highest quality polyurethane.
• Very durable and tear resistant makes a super seal.
• Safe in extreme hot and cold temperatures.
• Used for pigging, dewatering, hydro-static testing, batching, removing paraffin wax .
• Comes in various lengths depending on the number of discs and/or cups required.

• Crawler works with all sizes of beveling bands for 6" pipe and above.
• Accurately cuts and bevels pipe to any beveling requirement
• Mounts easily anywhere on the pipe.
• Crawlers have flexible 9' drive shaft standard; flexible 14' drive shaft for larger diameter pipe.
• No need for out-of-round pipe attachments.
• Motorized drive optional.

• Low pressure Inflatable Gas Bags.
• Designed to inflate to the exact diameter of the pipe to block dangerous fumes or gases from coming forward during repair of an active pipeline.
• Varying gauges of rubber and polyester depending on the size.
• Pressure gauges available.
• Optional flame retardant cover and nitrile rubber bladder.v

• Technology that combines the case, probe and electrode configuration with new generation solid-state circuitry.
• Simplified and more efficient.

• Compact, lightweight - no bulky battery packs.
• Uses standard 9-V battery and flat sponge electrode.
• Optional high speed roller.

• Four-wheel cutter that cuts steel, cast iron and ductile iron pipe(1" thru 12" pipe diameter).
• 4 clearance around pipe
• Tough guide fingers ensue perfect alignment for square cuts
• A closed 360 frame allows efficient cutting

• Best manual cutter for ductile iron and isrecommended for large diameter cast iron and steelpipe 5" to 34" pipe diameter (127 mm to 863.6 mm)
• Use the same cutter wheels for all size pipe Steel Wheels will cutup to .781 (19.84 mm) wall thickness.
• Great for cold cuts, fast setup and cutting in close quarters.
• Needs 4 8 (101.8 mm to 203.2 mm) clearance around pipe.

• Features :
• Easily handle pipe from 2 (60.3mm) through to 48 (1, 219mm) in diameter
• Light weight
• Urethane roller protect pipe coatingv

• Constructed of durable and lightweight hard-anodized aluminum.
• For cutting and beveling 2" to 48" diameter pipe
• Quick operating boomer assembly securely locks the machine to the pipe for an entire 360 rotation; No repositioning necessary.
• Patented H&M Cuboids Spacer System keeps the spacers on the machine to minimize set up time and post spacers.

• Bends pipe easily and economically
• Easily mounted on side boom-equipped tractors
• Bends pipe from 2 to 8 (50 mm 203.2 mm) in diameter
• Comes with mount and pin

• Check your detectors voltage output with different voltage jeepmeters.
• Model JM features a digital display and measures up to 40 kv.
• Model PJM jeepmeters are pocket size that measure 0 20 kv.

• Made of high tensile steel complete with rugged Teflon inserts, tested and load rated for safety.
• Specially designed for fast hook-up
• Comes in sizes from 3"to 48" (88.9 mm 1219.2 mm) .

• A heavy duty joint and hand wrap coating tape designed for hand wrapping field joints, fittings, ells and tees.
• Compatible with coal tar, fusion bond epoxy, asphalt and polyethylene pipeline coatings.
• Available in four thicknesses for both small and large diameter pipe.

• Wide selections to choose from General or Special Purpose.
• Use series 1 cutting tips.
• For use with acetylene and other pressurized gases.
• Equipped with reverse flow check valves.

• High performance coatings that have excellent resistance to cathodic disbondment
• High electrical resistivity
• Easy to apply, fast setting and low cos

• All components are made from top-grade material including alloy steel end irons and abrasion resistant nylon, coated for better wear resistance.
• Strong, lightweight and flexible for maximum ease of handling
• Liftex also offers Lined Steel Choker Belt, steel-lined fabric-faced belts that holds the pipe firmly in place with no slippage.

• Safety in separating pipe and ring-type-joint flanges
• Handles ASA raised face, ring-type-joint and cast iron flanges.
• Only require few sizes to handle all flanges
• Compact, light and easy to carry.
• Prevents safety incidents.
• Comes in 7 lb. to 20 lb. weights.

separating pipe a

• Stem-type seat mechanism that closes with the impact of inlet pressure. Dense, die-forged bodies and spring housing caps provide maximum strength and safety.
• Large range of pressure regulators and reverse flow check valves.
• Combined regulators and reverse flow check valves gas manifolds also available.

• Lightweight, stackable for easy handling, transportation and storage
• One plastic pipe stand will replace several wooden skids.
• Comes in three sizes from 2"- 24" (60.3 mm 609.6 mm) (unit weight 10 lbs., 18 lbs., 42 lbs.)

• Fast, safe and economical
• Made with rubber belting over strong wire rope.
• Self-releasing belt automatically unhooks after pipe is landed.

• Accurately control the bending of pipe to your specifications.
• Rugged built for the toughest of conditions, are quick to set-up and use.
• Available in sizes 2 to 12 (50 mm 304.8 mm) in diameter.