My ExportersIndia

For Buyer

For Seller

For Help

Our Products

  1. Abrasives & Grains 9 Products available
  2. Industrial Chemicals 7 Products available
  3. Silicone Sealants 6 Products available
  4. Adhesives Gum 6 Products available
  5. Detergent 4 Products available
  6. Diamonds 4 Products available
  7. Surface Cleaner 3 Products available
  8. Nuts Bolts And Fasteners 3 Products available
  9. Textile Chemicals 3 Products available
  10. Others Products 69 Products available

Our Products

We are leaders in the market for providing best range of hyper, Liquid Transparent Glass, Rain Unit, Different kind of Marble tensioners and Granite Tensioners

Marble Epoxy

We have entire range of epoxies resins for marble, granite and semi-precious stones. These epoxies are available in different viscosities and reactivities to suit various applications.
View Complete Details

Coloured Resin

We have entire range of epoxies resins for marble, granite and semi-precious stones. These epoxies are available in different viscosities and reactivities to suit various applications. Method of use: Grind the slabs to grit 120 and leave them to dry for 16-20hrs, so that absolutely no traces of water are found on the surface, especially on cracks.Mix resin and hardener in the ratio specified by weight and apply the mixture uniformly on the full surface of granite.
View Complete Details

Fiber Glass Net

We have entire range of Fiber Net for netting the slabs and for Block reinforcement.It has a weight of 65 75gmsqm available in mesh size of 4 x 5mm and Tensile Strength of 700 N5cm.
View Complete Details

Standard Tie-rods

We generally refer to this type of tie-rods as the common ones installed on hydraulic granite tensioners. These tie-rods could be for minimum 8mm, 10mm, 15mm or 20mm cut.
View Complete Details

Single Plate Tie-rods

The use of the single plate avoids the usual deposit of the slurry between the two plates which because of oxidation results in increased volume and opening of the two plates reducing the tie-rods life.
View Complete Details

Productive Tie-rods

These tie-rods made with a special fusion of the blade fixing and the blade hole is off-centered the new with respect to the axis of the plate allows a steady contact between the tie-rods and the gang-saw frame plate, resulting in reduction of the stresses caused by the stokes between the tie-rods and the frame plate themselves. This means longer life of the tie-rods and a little increase of the downfeed. In fact, these are the tie-rods for the new generation.
View Complete Details

Hyper

High production slab cutting line Hyper is a cnc cutting line with 11 axes suitable for cutting: rectangles, triangles and complex polygons.
View Complete Details

FIBER GLASS MAT GR300 & GR500

Their approximate weights are 300 and 500gmsqm respectively. MAT GR300 can be used also for very broken slabs where more strength is required.
View Complete Details

PARABEAM SYSTEM WITH EPOXY 5171

Parabeam is a special 3D Glass Fiber being used by the stone industry since 1995 with lots of success. PARABEAM is very well known in the Italian market as the best solution to wrap marble granite blocks.Compared to the other methods on the market, PARABEAM guarantees absolutely no damages on marble blocks because of its great adhesion on the surface and its flexibilityMost of the marble and granite manufacturers processing broken & exotic materials prefers to use PARABEAM to prepare blocks to be cut because it is the safest solution.It is availabe in 50 square metre rolls with height of 127cm available in 5 or 10mm thickness. We nornally suggest 5mm for Block Reinforcement.
View Complete Details

CNC Machines

Smart bridge for cutting & shaping jobs.BRIMA is a family of CNC machines for milling and shaping with up to 4 interpolated axis.
View Complete Details

Colouring Tubes

The easy colour system allows any marble worker to obtain the right colour he needs for his own glue, the shade he prefers, totally by doing it himself. Available in White, Yellow, Red, Brown, Green, and Black colours.

Additional Information:

Packaging Details : Available in 50 gms packing in tubes.

View Complete Details

Marble Granite Polish

3,115 /Litre Get Latest Price
  • Min. Order (MOQ) 12 Litre
  • Brand Name MOELLER CHEMIE, GERMANY
  • Color CLEAR
  • Usage/Application DOMESTIC & COMMERCIAL
  • Packaging Type PLASTIC CONTAINER
  • Packaging Size LT 1
  • Form Liquid
  • Application Surface MARBLE & GRANITE
  • Features MAINTAINS & REFRESHES WORN AND DULL STONE SURFACE
  • State/Form Liquid
View Complete Details

Liquid Transparent Glass

It can be used for Travertine or any other marble where absolute transparent filling is required.Available in paste & liquid in KG 1 packing. Packed in a box containing 6 pcs.

Additional Information:

Packaging Details : Available in paste & liquid in KG 1 packing. Packed in a box containing 6 pcs.

View Complete Details

Rain Unit

A new mechanical rain unit allowing homogeneity of feeding on all the surface to be sawed and a drastic reduction of the maintenance costs allowing perfect distribution of the mixture, homogeneity of feeding on all the surface to be sawed, easy intervention, higher duration, lower maintenance costs, lower sawing price
View Complete Details

Marble Tensioners

The hydraulic device used to tension the blades of the gang-saws for cutting marble blocks has been designed to keep constant and uniform the tension of blades in order to obtain perfect planarity of the cut.
View Complete Details

Different Kind Of Marble Tensioners

Normally the blades of the marble tensioners are tensioned by 10 tons. Officine Marchetti produces several kind of 9 tons marble tensioner according to the thickness of the slab you want to obtain: Double hydraulic tensioner for 10 mm minimum cutHydraulic tensioner for 11 mm minimum cutHydraulic tensioner for 12.5mm minimum cutHydraulic tensioner for 15 mm minimum cut 13 tons Hydraulic tensioner The modern demand for the tensioning of the blades leads Officine Marchetti to design a new kind of tensioner with a load of 13 tons. The possible by this tensioner is the 15 mm. Officine Marchetti produces different tie-rods according to the thickness of the slabs required.
View Complete Details

Granite Tensioners

The tensioner used to tension the blades for cutting granite blocks and installed on granite gangsaws is an hydraulic modular device (patented) especially designed to distribute the same tension on all blades of the gangsaw. So, it avoids all the manual tensioning procedures with the great advantage of easily equipping and discussing the gangsaw. Hydraulic tensioners for granite are available in 8mm and 10mm minimum cut with three rains of pistons and for 15mm and 20mm minimum cut with two rows of pistons.
View Complete Details

Marble Gang Saw

The tensioner used to tension the blades for cutting granite blocks and installed on granite gangsaws is an hydraulic modular device (patented) especially designed to distribute the same tension on all blades of the gangsaw. So, it avoids all the manual tensioning procedures with the great advantage of easily equipping and discussing the gangsaw. Hydraulic tensioners for granite are available in 8mm and 10mm minimum cut with three rains of pistons and for 15mm and 20mm minimum cut with two rows of pistons.
View Complete Details

Glass Gel For Wet Surface

This glue based on polyester resin is a revolutionary product. Suitable to weld or fill any humid or even totally wet. It can be added to water up to 10% of its volume without showing any failure in the adhesion process. The catalysis takes place by using a traditional hardener paste.

Additional Information:

Packaging Details : Available in KG 1 packing. Packed in a box containing 6 pcs.

View Complete Details

Special Pumps For Thick Mud

Vertical axis with cnatilever shaft. Body with upward axial suction hole which allows to use the pump also for strongly thick muds besides favouring the inflow of the slushes to the channel impeller. These pumps are particularly suitable emptying decantation tanks and conveying thick muds. Coupling through flexible coupling.
View Complete Details

Rust Remover

Marble or granite can have stains of paint, rust, oil, food etc. We should first clean the surface with a neutral or mild alkaline strong cleaner like R55 Intensive Cleaner from Moeller Chemie, Germany followed by the specific stain remover. However, as always "Prevention is better than Cure"; we must seal marble or granite with a good sealant impregnator.
View Complete Details

Automatic Power Unit

The Marchetti automatic hydraulic unit for granite tensioner achieves a uniform tension of the hydraulic equipment and to all the blades on the gang-saw, maintaining it constant unit finished. Its accuracy and reliability make it an essential part of tensioning system.
View Complete Details

Horizontal Pumps For Filter Press

A Special pump designed for heavy duty, highly reliable and suitable to convey abrasive and high-density slurries to the filter presses.
View Complete Details

Pumps For Granite Gang-Saws

Special pumps designed and studied for conveying of metallic mixtures to the gangsaw cutting granite. They are available in two types: Series PSVSeries PGM Series PSV: Special vertical axis pumps for conveying abrasive mixtures-sludge from sawmills work-shops, tile factories, etc. with cantilever shaft without stuffing box, vertical position of electrical motor to avoid risks of contact with pumped liquid, coupling through VEE-belts. Series PGM: Special pumps for conveying metal shot mixtures to granite gang-saws. Vertical axis, with cantilever shaft without stuffing box, vertical position of motor with direct coupling through elastic joint.
View Complete Details

Steel Shot Feeder

Used to handle metal shot, corundum, carbides etc. for mixes that feed granite gang-saws.Permits precision dosing of the quantities normaly required to achieve best results with maximum savings for the user.These units have a metal structure that protects their internal mechanism and a cover that can be opened for loading.
View Complete Details

Automatic Lime Mixer

For the constant and automatic feding of water and lime mixture upto 4 granite gangsaws in the percentage requested by the operator. Its application offers following immediate advantages to the sawing cycle: Perfect lime batchingLime mixture homogeneityConstant level in the feeding pump pit also without limeBetter sawing resultsLowering increase due to mixture homogeneityTime saving in the slabs washingLess danger of slabs oxidation
View Complete Details

BD24 Polyester Resin

Clear polyester- based resin for marble and natural stones. Colourless and stable to light; suitable for filling and invisible gluing of slabs or to reinforce them by applying a fiberglass net on the underside. Liquid hardener is included.

Additional Information:

Packaging Details : Available in KG 1 packing. Packed in a box containing 6 pcs.

View Complete Details

Jolly High Gluing Power

Clear glue with a superior gluing power is based on particularly tenacious polyster resins, for unbeatable adhesions compared with any other polyster products. It is therefore suitable for all works where a particular adhesion is required, but also provides all the other typical glue features. Specifically ideal for reconstruction works and gluing works on granites. It is catalysed with hardener paste. Available densities: solid and liquid: available colour: clear and black.

Additional Information:

Packaging Details : Available in KG 1 packing. Packed in a box containing 6 pcs.

View Complete Details

Lux Granite

The final LUX for granite available in various types always guarantees a high gloss owing to its special composition. The introduction of new production technology and the accurate choice of raw materials allows obtaining one of the best final polishing abrasive for granite in the market. Available in range of grains from 120, 220, 320, 400, 600, 800, 1200, 1500, 2000, 3000.
View Complete Details

Marble Brushes

Abra Iride has entire range of brushes for marble and granite for preparing the surface, for ageing, polishing etc. of marble, granite and any other natural stone, as well as ceramic and agglomerates. The abrasive filaments undergo a special treatment against heat ageing and they are particularly suitable to humid applications. The filaments can be normal on reinforced (R). They are suitable to both manual and automatic machines with one or more heads. DIAMOND IRINEX is also available with diamond filaments. They are available as 24, 36, 46, 60, 80, 120, 180, 240, 320, 500, 600, 800, 1000.
View Complete Details

Edge Polisher

Tools used for straight, bull nosing and chamfering of marble, granite, natural stones and agglomerates processing. Available in synthetic (or magnesite type) for complete polishing of marble. Available in grains 24, 36, 46, 60, 120, 220, 320, 400, 600, 800, 1000, 1200 and 5 Extra.
View Complete Details

Automatic Steel Shot Recovery

or programmed separation and processing of the metal shot mix, with immediate recycle of the active part and disposal of purge waste. This unit permits electronic programming of purge times and achieves constant shot percentage in the mix, improved sawing results, greater sawing speed, savings in shot and labour savings. The metal structure has telescoping feet to adjust in height and includes single or double body cyclone powered by a timed solenoid valve with both opening and time control or by a pneumatic valve.
View Complete Details

R155 (Intensive Cleaner Acid Free)

R155 is a superior, mild alkaline, concentrated cleaner for removing general construction dirt, emulsion paint, wax coatings, the residual film built up from regular cleaning products as well as oil, grease and light cement film from all natural and artificial stone surfaces. R155 has been specially developed for use on polished and fine honed marble, limestone and travertine. For interior and exterior use.

Additional Information:

Packaging Details : Available in LT 1 & LT 0.25 packing. Packed in a box containing 12pcs & 30pcs respectively.

View Complete Details

Universal Marble Cleaner

Clean is a universal cleanser that fit both for professional use and home work. Suitable for cleaning marble, ceramic, gres, and synthetic floorings, without damaging the surfaces. It does not compromise the polishing on marble and it works also in small amounts; it is suitable for any kind of floor's maintenance.

Additional Information:

Packaging Details : Available in LT1 packing. Packed in a box containing 12pcs.

View Complete Details

R161 Porcelain Tile Intensive Cleaner

R161 is a special concentrated alkaline based cleaner that removes oily and greasy deposits, general construction dirt, light cement film built up from regular cleaning products from glazed, unglazed, polished, honed and natural effect porcelain tile surfaces. Polished surfaces will not be damaged. For interior and exterior use.

Additional Information:

Packaging Details : Available in LT 1& 0.25 packing. Packed in a box containing 12pcs & 30pcs respectively.

View Complete Details

R163 Cement Film Remover Acid

R163 is a special acid based concentrated cleaner for removing cement and mortar residue, lime and calcium deposits, and heavy duty construction dirt from all acid tolerant natural and artificial stone, ceramic tiles, porcelain, brick, terracotta, clay tiled floors and rough concrete surfaces. Not for use on polished surfaces. Suitable for interior and exterior use.

Additional Information:

Packaging Details : Available in LT 1& 0.25 packing. Packed in a box containing 12pcs & 30pcs respectively.

View Complete Details

R 170 Acid Free Concentrated Cleaner

R170 is a special long lasting acid free concentrated cleaner that removes general dirt and eliminates and prevents the reformation of moss, mould and other vegetation from paths, patios, walls and steps made from natural and artificial stones and other forms of external paving. Even extremely dirty surfaces will become clean and bright again. R170 does not damage polished surfaces. For external use only.

Additional Information:

Packaging Details : Available in LT 1 packing. Packed in a box containing 12pcs.

View Complete Details

R 175 Exterior Stone Cleaner

R175 is a special concentrated acid based cleaner that removes cement film, lime scale, mortar residue, rust stains and heavy duty construction dirt from all acid tolerant natural and artificial stone surfaces. The special rust- preventing additives in R175 make it especially suitable for cleaning rust susceptible hard stones, including those with polished finishes. For exterior use only.

Additional Information:

Packaging Details : Available in LT 1 & LT 0.25 packing. Packed in a box containing 12pcs & 30pcs respectively.

View Complete Details

R777 Hard Stone Rust Remover

R77 is a ready to use acid based cleaner that removes rust spots and stains from all acid tolerant hard stone. Special additives reduce the development of rust after treatment. Suitable for polished surfaces.

Additional Information:

Packaging Details : Available in LT 200, LT 10, LT5 & LT1 packing. Packed in a box containing 12pcs for LT1.

View Complete Details

R179 R777 Soft Stone Rust Remover

R179 is a special ready to use cleaner for use on all natural and artificial stone surfaces that removes rust spots caused by iron fertilizer, metal furniture, heater leaks etc. R179 contains special rust inhibitors that reduce future rust development. R179 is especially suitable for polished marble and limestone.

Additional Information:

Packaging Details : Available in LT 0.475 packing. Packed in a box containing 12pcs.

View Complete Details

R185 Composite Quartz Intensive Cleaner

R185 is a special concentrated cleaner for removing fatty, oily and greasy substances, general construction dirt, cement and grout smears, wax coatings and film built up from regular cleaning products from polished, honed, satin and brushed composite quartz materials. Polished surfaces will not be damaged. For interior and exterior use.

Additional Information:

Packaging Details : It is available in LT 1 packing. Packed in a box containing 12pcs.

View Complete Details

P311 Composite Quartz Care Cleaner

P311 is a concentrated mild soap cleaner. Its highly active ingredients clean and maintain composite quartz with a honed, polished or glazed surface quickly and thoroughly. Its natural care components optimize the colour and structure of the material. P311 has been specially developed to bring a brilliant appearance to stone items, floors and walls. If used regularly, the surfaces will become more stain resistant and easier to clean. The water-soluble ingredients prevent the creation of cloudy stains by reducing the build-up of film layers on surfaces like soap residue and lime scale deposits. P311 is for daily use. It cleans and maintains in one action.

Additional Information:

Packaging Details : Available in LT 1 packing. Packed in a box containing 12pcs.

View Complete Details

P315 (Porcelain Tile Care Cleaner)

P315 is a mild concentrated cleaner with highly active ingredients that clean and maintain honed, polished, textured and glazed porcelain tiles. P315 has been specially developed to enhance the appearance of porcelain wall and floor tiles and contains special ingredients that enrich the colour and structure of the surface. If used regularly, a resistance to stains is developed and the tiles will become easier to clean. Its water-soluble ingredients also prevent the buildup of film usually caused by soap residue.

Additional Information:

Packaging Details : Available in LT 1 & LT 0.25 packing. Packed in a box containing 12pcs & 30pcs respectively.

View Complete Details

P324 (Liquid Stone Soap)

P324 is a mild concentrated natural soap for daily soap. The highly active ingredients quickly and thoroughly clean and maintain all natural and artificial stones, brick paving, clay tiles and unglazed ceramic and porcelain tiles. Its natural protective components support the colour and structure of the surface. P324 has been specially developed to enhance the appearance of walls and floors in all natural and artificial stones. If used regularly, treated surfaces increase their resistance to stains as P324 forms an invisible dirt repellent film that helps to support existing impregnation, making regular maintenance easier. The water soluble components prevent streaking and restrict the buildup of soap residue.

Additional Information:

Packaging Details : Available in LT 1 packing. Packed in a box containing 12pcs

View Complete Details

R152 WAX REMOVER PASTE

R152 is an active cleaning pastepoultice that removes oil, wax, cement and grease stains as well as silicone smears and mineral deposits from all marble and granite floors, ceramic, porcelain and concrete surfaces. R152 also removes dirt and stains from tile edges caused by the application of unsuitable silicone sealers and grout or glue sealers. The poultice penetrates up to 2 cm in depth and is safe for use on polished and fine honed surfaces. For interior and exterior use.

Additional Information:

Packaging Details : Available in LT 0.25 & LT 0.75 packing. Packed in a box containing 30pcs & 12pcs respectively.

View Complete Details

Twinspot Oil Stain Remover

Specific detergent for the removal of oily and greasy stains (oil, butter) from marble, granite and other natural and artificial stone. Solvent-based product. Thoroughly shake the bottle and pour TWINSPOT on the stain to remove. Let it dry for approx. 2 hours then remove the residual powder using a brush or some water with neutral detergent. In case of tough stain, repeat the operation.

Additional Information:

Packaging Details : Available in LT 1 packing. Packed in a box containing 12pcs.

View Complete Details

R154 STRIPPER REMOVER

R154 is a ready to use solvent based stain remover for removing old impregnators, sealers, wax treatments, paint, film built up from regular cleaning products, asphalt and bitumen, grease, oils and varnish from marble, granite and other natural and artificial stone.

Additional Information:

Packaging Details : Available in LT 1 packing. Packed in a box containing 12pcs.

View Complete Details

Twinstripper Wax Remover

Wax remover in water-solvent mixture, especially developed to remove layers of wax or acrylic treatment. Pour the diluted over the surface to treat. Let it act for a few minutes, then brush by hand or machine (black or brown disk). Remove with liquid suction. Rinse well with plenty of clean water. If necessary, repeat operation.

Additional Information:

Packaging Details : Available in LT 1 packing. Packed in a box containing 12pcs.

View Complete Details

NOSTAIN ORGANIC STAIN REMOVER

Specific detergent for the removal of organic stains (tea, coffee, wine.) from from marble, granite and other natural and artificial stone. Easy to use, it acts quickly on new and superficial stains without damaging the surface brightness. Directly cover the stain to remove. Let it work for approx. 1 hour then removes the excess using a moist cloth. If necessary, repeat operation until the whole stains removal. Do not let the product on the surface more than 1 hour. We recommend testing on a small area before applying on the surface.
View Complete Details

TWINS2151 PAINTS STAIN REMOVER

It removes oil, paint and wax stains from marble and granite floors. Pour TWINS2151 on the surface to clean. Let it act for a few seconds then rub with a brushing machine equipped with black or brown disk, or manually using a floor brush. Take off the residues of wax with a clean cloth. If necessary, repeat operation.

Additional Information:

Packaging Details : KG1 packed in box containing 12pcs. Packed in a box containing 12pcs.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us