Post Buy Requirement
STERLING VALVES AND CONTROLS

STERLING VALVES AND CONTROLS

gstGST : 33ABKFS0950J1Z3 Verified Add Review

Other Products / Services

Piston Valve

  • Min. Order (MOQ) 100 Piece
  • Material Metal
  • Application Gas Fitting, Oil Fitting, Water Fitting
  • Automatic Grade Manual
  • Pressure High Pressure, Low Pressure, Medium Pressure
  • Sizes Range ΒΌ inch to 8 inch (8 mm to 200 mm)
  • Pressure Rating PN 10, PN 16, Class 150 to Class 2500
  • Design Standards ASME B16.34, API 6D and API 599.
  • Testing Standard API 598, API 6D.
  • Manual Operations Bare-shaft, Lever & Gearbox.
  • Automation Operations Electric, Pneumatic, and Hydraulic Actuators.

Special Features :

  • The piston always held by value ring in either open or closed position resulting in no vibration.
  • It can be used as bi-directional valve.
  • However it is preferred to install the valve such that pressure acts below the piston.
  • Value ring used for sealing is made up of packing, hence the piston valve acts as a soft seated valve.
  • The piston valves used in many brass instruments
  • Also used in many stationary steam engines and steam locomotives

 

Shutoff Rating :

Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.

End Connection

SCOPE STANDARD
Socket-Weld Ends ASME B16.11
Screwed-End BSPT ISO 7-1
Screwed-End NPT ASME B1.20.1
End Flange ASME B16.5 RF/ FF/ RTJ
Tri Clover End
View Complete Details

Manual Check Valve

  • Min. Order (MOQ) 100 Piece
  • Type Industrial Valves
  • Material Metal
  • Usage Water Fitting
  • Finishing Polished
  • Driving Mode Manual
  • Sizes Range DN 50 to DN 900 (2inch to 36inch).
  • Pressure Rating PN10, PN16, PN25, Class 150 to 1500
  • Design Standards API 6D
  • Testing Standard API 598 / BS 6755 PART 1

Special Features :

  • Low pressure drop increases energy savings.
  • Lower maintenance costs; fewer moving parts.
  • Flexibility to cope with variable flow conditions.
  • Smaller footprint than conventional check valves.
  • Allow easy field retrofitting of various product lines.
  • Reduce down time and loss of production due to failure.
  • Protect pumps and compressor equipment from damage.
  • Eliminate chatter and reduce the possibility of sudden valve failure
  • Shutoff Rating
  • Zero Leakage for Soft Seated & Metal Seated as per API 598 or relevant STD.
  • Wafer Type, Flangeless, Sandwich Pattern.
  • Suitable to mount between two flanges

End Connection

SCOPE STANDARD
Socket-Weld Ends ASME B16.11
Screwed-End BSPT ISO 7-1
Screwed-End NPT ASME B1.20.1
End Flange ASME B16.5 RF/ FF/ RTJ
Tri Clover End

 

SCOPE FLANGE DRILLING
Wafer, Lugged, Flanged BS4504 PN10/PN16,
BS4504 PN10/PN16,
BS4504 PN10/PN16,

 

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us