Our Products
Steelmans HSS Standard Keyseating Broaches
Push and Pull types Involute and Straight Spline, Serration broach, Surface , Keyway, Special Profile Broaches, Keyway, Hexa. Broaches and Standard Broach Sets.Gear Hobs , Gear Cutters .Vertical and Horizontal Broaching Machines , Broach sharpening machines.
Keyway Broaches
Special push or pull different types of Keyway with or without Chamfer.
Surface & Keyway Broaches
Flat Surfaces, Cancave, Convex irregular shapes, External forms such as slots, contouring, straddles, Flats, Irregular shapes, and other types surface keyway are manufactured as per specifications. Multiple surfaces can be formed in a single pass by a set of surface broaches.
Push and Pull types Involute and Straight Spline, Serration broach, Surface , Keyway, Special Profile Broaches, Keyway, Hexa. Broaches and Standard Broach Sets.Gear Hobs , Gear Cutters .Vertical and Horizontal Broaching Machines , Broach sharpening machines.
Specifications
STM No. | Nominal Diameter | Tolerances | Pilot Diameter | Drill Size | Broach Length |
---|---|---|---|---|---|
2991 | 01/04/15 | .2510-.2505 | 0.23 | 15/64 | 6 |
3000 | 05/16/15 | .3135-.3130 | 0.3 | 19/64 | 6 |
3009 | 03/08/15 | .3760-.3755 | 0.36 | 23/64 | 7 |
3018 | 07/16/15 | .4385-.4380 | 0.42 | 27/64 | 7 |
3027 | 01/02/15 | .5010-.5005 | 0.48 | 31/64 | 10 |
3036 | 09/16/15 | .5635-.5630 | 0.55 | 35/64 | 10 |
3045 | 05/08/15 | .6260-.6255 | 0.61 | 39/64 | 10 |
3054 | 11/16/15 | .6885-.6880 | 0.67 | 43/64 | 10 |
3063 | 03/04/15 | .7510-.7505 | 0.73 | 47/64 | 11 |
3072 | 13/16 | .8132-.8130 | 0.8 | 51/64 | 11 |
3081 | 07/08/15 | .8765-.8760 | 0.86 | 55/64 | 11 |
3090 | 15/16 | .9390-.9380 | 0.92 | 59/64 | 11 |
3099 | 1 | 1.0015-1.0005 | 0.98 | 63/64 | 11 |
Push and Pull types Involute and Straight Spline, Serration broach, Surface , Keyway, Special Profile Broaches, Keyway, Hexa. Broaches and Standard Broach Sets.Gear Hobs , Gear Cutters .Vertical and Horizontal Broaching Machines , Broach sharpening machines.
Steelmans HSS Standard Hexagon Broaches
STM No. | Hex Size | Tolerance | Pilot Diameter | Drill Size | Dimension Across Corners | Tooth Pitch | Broach Length |
---|---|---|---|---|---|---|---|
2694 | 01/08/15 | .1255-.1260 | 01/08/15 | 01/08/15 | .1450-.1470 | 01/08/15 | 5 |
2703 | 05/01/32 | .1565-.1570 | 05/01/32 | 05/01/32 | .1800-.1820 | 01/08/15 | 5 |
2712 | 03/16/15 | .1880-.1890 | 03/16/15 | 03/16/15 | .2145-.2155 | 05/01/32 | 6 |
2721 | 07/01/32 | .2190-.2200 | 07/01/32 | 07/01/32 | .2500-.2520 | 05/01/32 | 6 |
2730 | 01/04/15 | .2505-.2515 | 01/04/15 | 01/04/15 | .2865-.2875 | 03/16/15 | 6 |
2739 | 09/01/32 | .2815-.2825 | 09/01/32 | 09/01/32 | .3220-.3240 | 03/16/15 | 8 |
2748 | 05/16/15 | .3130-.3140 | 05/16/15 | 05/16/15 | .3580-.3590 | 07/01/32 | 8 |
2757 | 11/01/32 | .3440-.3450 | 11/01/32 | 11/01/32 | .3950-.3970 | 07/01/32 | 8 |
2766 | 03/08/15 | .3755-.3765 | 03/08/15 | 03/08/15 | .4300-.4310 | 07/01/32 | 9 |
2775 | 13/32 | .4065-.4075 | 13/32 | 13/32 | .4670-.4690 | 01/04/15 | 10 |
2784 | 07/16/15 | .4385-.4395 | 07/16/15 | 07/16/15 | .5020-.5030 | 09/01/32 | 11 |
2793 | 15/32 | .4690-.4700 | 15/32 | 15/32 | .5390-.5410 | 09/01/32 | 12 |
2802 | 01/02/15 | .5005-.5015 | 01/02/15 | 01/02/15 | .5740-.5750 | 09/01/32 | 12 |
2811 | 09/16/15 | .5630-.5640 | 09/16/15 | 09/16/15 | .6480-.6500 | 05/16/15 | 14 |
2820 | 05/08/15 | .6260-6270 | 05/08/15 | 05/08/15 | .7170-.7185 | 03/08/15 | 17 |
2829 | 11/16/15 | .6880-.6890 | 11/16/15 | 11/16/15 | .7930-.7950 | 03/08/15 | 17 |
2838 | 03/04/15 | .7510-.7520 | 03/04/15 | 03/04/15 | .8610-.8625 | 03/08/15 | 18 |
2847 | 07/08/15 | .8765-.8775 | 07/08/15 | 07/08/15 | 1.0085-1.0095 | 03/08/15 | 19 |
2856 | 1 | 1.0020-1.0030 | 1 | 1 | 1.1520-1.1530 | 03/08/15 | 20 |
Steelmans HSS Metric Hexagon Broaches
STM No. | Hex Size | Tolerances | Diagonal Dimensions | Pilot Diam. | Drill Size | Broach Length |
---|---|---|---|---|---|---|
2865 | 4 mm | .1580-.1585 | .1820-.1830 | 0.16 | 4 | 6 |
2874 | 5 mm | .1973-.1983 | .2270-.2280 | 0.2 | 5 | 6 |
2883 | 6 mm | .2367-.2377 | .2730-.2740 | 0.24 | 6 | 7 |
2892 | 7 mm | .2760-.2770 | .3180-.3190 | 0.28 | 7 | 8 |
2901 | 8 mm | .3155-.3165 | .3634-.3644 | 0.32 | 8 | 9 |
2910 | 10 mm | .4729-.4739 | .5452-.5462 | 0.47 | 12 | 13 |
2937 | 16 mm | .6310-.6320 | .7248-.7258 | 0.62 | 16 | 17 |
2946 | 18 mm | .7092-.7102 | .8150-.8160 | 0.71 | 18 | 17 |
2964 | 22 mm | .8666-.8676 | .9958-.9968 | 0.87 | 22 | 19 |
2973 | 24 mm | .9454-.9464 | 1.0868-1.0878 | 0.94 | 24 | 20 |
2982 | 25 mm | .9848-.9858 | 1.1323-1.1333 | 0.98 | 25 | 20 |
Push and Pull types Involute and Straight Spline, Serration broach, Surface , Keyway, Special Profile Broaches, Keyway, Hexa. Broaches and Standard Broach Sets.Gear Hobs , Gear Cutters .Vertical and Horizontal Broaching Machines , Broach sharpening machines.
Specifications
No. | Keyway Width | Body Diameter | Dimension | Tooth Pitch | Broach Length |
---|---|---|---|---|---|
2244 | 42385 | 42445 | 0.224 | 42445 | 6 |
2253 | 42385 | 42373 | 0.287 | 42445 | 7 |
2262 | 42377 | 42437 | 0.437 | 42373 | 9 |
2271 | 42377 | 42371 | 0.565 | 42437 | 12 |
2280 | 42377 | 42629 | 0.63 | 42437 | 12 |
2289 | 42377 | 42498 | 0.693 | 42437 | 12 |
2298 | 42445 | 42498 | 0.716 | 42437 | 15 |
2316 | 42445 | 42433 | 0.844 | 42437 | 15 |
2334 | 42445 | 42559 | 0.97 | 42437 | 15 |
2352 | 42373 | 1 | 1.121 | 42437 | 18 |
Steelmans HSS Standard One Pass Keyway Broaches
STM No. | Keyway Width | Tooth Pitch | Broach Dimensions |
---|---|---|---|
2190 | 42377 | 11933 | 3/8 x 15 |
2199 | 11810 | 11933 | 3/8 x 15 |
2208 | 42445 | 11933 | 3/8 x 15 |
2217 | 42373 | 11933 | 3/8 x 15 |
2226 | 42506 | 11933 | 3/8 x 15 |
2235 | 42437 | 11933 | 3/8 x 15 |
Steelmans HSS Standard Keyseating Broaches
STM No | Keyway Width | Tooth Pitch | Overall Height at Teeth | Body Width | Broach Length |
---|---|---|---|---|---|
2028 | 42385 | 42437 | 42437 | 42445 | 16 |
2037 | 11749 | 42437 | 42437 | 42445 | 16 |
2046 | 42377 | 42437 | 42567 | 42445 | 16 |
2055 | 11810 | 42437 | 42371 | 11810 | 16 |
2064 | 42445 | 42437 | 42629 | 42445 | 16 |
2073 | 42373 | 42437 | 42433 | 42373 | 16 |
2082 | 42373 | 42437 | 42433 | 42373 | 20 |
2091 | 42506 | 42437 | 42559 | 42506 | 16 |
2100 | 42506 | 42437 | 42559 | 42506 | 20 |
2109 | 42437 | 17/32 | 42559 | 42437 | 16 |
2118 | 42437 | 17/32 | 42559 | 42437 | 20 |
2127 | 42567 | 17/32 | 1 | 42567 | 20 |
2136 | 42371 | 17/32 | 1 | 42371 | 20 |
2145 | 42629 | 17/32 | 1 | 42629 | 20 |
2154 | 42498 | 17/32 | 1 | 42498 | 20 |
2163 | 42433 | 17/32 | 1 | 42433 | 20 |
2172 | 42559 | 17/32 | 1 | 42559 | 20 |
2181 | 1 | 17/32 | 1 | 1 | 20 |
Steelmans are leading specialists in manufacturing Spline Broaches to the maximum length of 1800 mm.
Involute, Straight, Serration Broaches
A complete range of Spline-Involute, Parallel and Trapezoidal, Serrations, Ratchet, broaches specially designed to suit the component specifications. Available in push or pull type desigh. We regularly manufacturer spline broaches for precision-made Steering Knuckle Arm, Constant Mesh Gear, Front Axle, Lift Arm, Depth Control Cap, Bull Gear, Differential Lock Clutch centre and Fly/Sprocket Wheel Ratchet components.
Complete range of Spline Broaches
'STEELMANS' is one of the Largest Half Round & Surface Broach Set Manufacturers for the Connecting Rods in the World. In 1984, Steelmans set in motion a new era of technological excellence and expertise in the manufacturing of half round and surface broach sets for the connecting rod and caps, for the auto industry. A total set of 22 Nos. of broaches are provided as a left and right joint face rougher, left and right side lock rougher, left and right side lock finisher, joint face finisher, half bore rougher and finisher, and side face finishers. We also offer to replace only those broach inserts which has worn undersize or has been damaged. We can also down size the fully consumed broaches by providing the necessary shims, thereby recycling the existing under size broach, and hence reducing both the cost and delivery time. Serration Surface Broaches are also made as per special design to suit and match the Serration on Connecting Rods and Caps. Re-sharpening services are also available. Above all, we offer lowest best International Rates!Ask for the quotation.
Spline, Serration, Surface, Round, Keyway, Hexagon broaches
Steelmans HSS Standard Hexagon Broaches
STM No. | Hex Size | Tolerance | Pilot Diameter | Drill Size | Dimension Across Corners | Tooth Pitch | Broach Length |
---|---|---|---|---|---|---|---|
2694 | 42377 | .1255-.1260 | 42377 | 42377 | .1450-.1470 | 42377 | 5 |
2703 | 11810 | .1565-.1570 | 11810 | 11810 | .1800-.1820 | 42377 | 5 |
2712 | 42445 | .1880-.1890 | 42445 | 42445 | .2145-.2155 | 11810 | 6 |
2721 | 11871 | .2190-.2200 | 11871 | 11871 | .2500-.2520 | 11810 | 6 |
2730 | 42373 | .2505-.2515 | 42373 | 42373 | .2865-.2875 | 42445 | 6 |
2739 | 11933 | .2815-.2825 | 11933 | 11933 | .3220-.3240 | 42445 | 8 |
2748 | 42506 | .3130-.3140 | 42506 | 42506 | .3580-.3590 | 11871 | 8 |
2757 | 11994 | .3440-.3450 | 11994 | 11994 | .3950-.3970 | 11871 | 8 |
2766 | 42437 | .3755-.3765 | 42437 | 42437 | .4300-.4310 | 11871 | 9 |
2775 | 13/32 | .4065-.4075 | 13/32 | 13/32 | .4670-.4690 | 42373 | 10 |
2784 | 42567 | .4385-.4395 | 42567 | 42567 | .5020-.5030 | 11933 | 11 |
2793 | 15/32 | .4690-.4700 | 15/32 | 15/32 | .5390-.5410 | 11933 | 12 |
2802 | 42371 | .5005-.5015 | 42371 | 42371 | .5740-.5750 | 11933 | 12 |
2811 | 42629 | .5630-.5640 | 42629 | 42629 | .6480-.6500 | 42506 | 14 |
2820 | 42498 | .6260-6270 | 42498 | 42498 | .7170-.7185 | 42437 | 17 |
2829 | 42690 | .6880-.6890 | 42690 | 42690 | .7930-.7950 | 42437 | 17 |
2838 | 42433 | .7510-.7520 | 42433 | 42433 | .8610-.8625 | 42437 | 18 |
2847 | 42559 | .8765-.8775 | 42559 | 42559 | 1.0085-1.0095 | 42437 | 19 |
2856 | 1 | 1.0020-1.0030 | 1 | 1 | 1.1520-1.1530 | 42437 | 20 |
Steelmans HSS Metric Hexagon Broaches
STM No. | Hex Size | Tolerances | Diagonal Dimensions | Pilot Diam. | Drill Size | Broach Length |
---|---|---|---|---|---|---|
2865 | 4 mm | .1580-.1585 | .1820-.1830 | 0.1575 | 4 | 6 |
2874 | 5 mm | .1973-.1983 | .2270-.2280 | 0.1968 | 5 | 6 |
2883 | 6 mm | .2367-.2377 | .2730-.2740 | 0.2362 | 6 | 7 |
2892 | 7 mm | .2760-.2770 | .3180-.3190 | 0.2756 | 7 | 8 |
2901 | 8 mm | .3155-.3165 | .3634-.3644 | 0.315 | 8 | 9 |
2910 | 10 mm | .4729-.4739 | .5452-.5462 | 0.4724 | 12 | 13 |
2937 | 16 mm | .6310-.6320 | .7248-.7258 | 0.623 | 16 | 17 |
2946 | 18 mm | .7092-.7102 | .8150-.8160 | 0.7087 | 18 | 17 |
2964 | 22 mm | .8666-.8676 | .9958-.9968 | 0.8661 | 22 | 19 |
2973 | 24 mm | .9454-.9464 | 1.0868-1.0878 | 0.9449 | 24 | 20 |
2982 | 25 mm | .9848-.9858 | 1.1323-1.1333 | 0.9842 | 25 | 20 |
Push and Pull types Involute and Straight Spline, Serration broach, Surface , Keyway, Special Profile Broaches, Keyway, Hexa. Broaches and Standard Broach Sets.Gear Hobs , Gear Cutters .Vertical and Horizontal Broaching Machines , Broach sharpening machines.
Steelmans American Standard Keyway Broaches (Shims Included)
STM No. | Broach Size | Tolerance | Tooth Pitch | No.of Teeth | Shims Req'd | Broach Dim. |
---|---|---|---|---|---|---|
201 | 1/16-A | .0625-.0635 | 42445 | 18 | 0 | 1/8 X 5 |
210 | 3/32-A | .0938-.0948 | 42445 | 18 | 0 | 1/8 X 5 |
219 | 1/8-A | .1252-.1262 | 42445 | 18 | 1 | 1/8 X 5 |
0.228 | 3/32-B | .0937-.0947 | 11933 | 16 | 0 | 3/16 X 7 |
237 | 1/B-B | .1252-.1262 | 11933 | 16 | 1 | 3/16 X 7 |
246 | 5/32-B | .1564-.1574 | 11933 | 16 | 1 | 3/16 X 7 |
255 | 3/16-B | .1877-.1887 | 11933 | 16 | 1 | 3/16 X 7 |
264 | 3/16-C | .1877-.1887 | 42437 | 22 | 1 | 3/8 X 12 |
273 | 1/4-C | .2502-.2512 | 42437 | 22 | 1 | 3/8 X 12 |
282 | 5/16-C | .3127-.3137 | 42437 | 22 | 2 | 3/8 X 12 |
291 | 3/8-C | .3755-.3765 | 42437 | 22 | 2 | 3/8 X 12 |
300 | 5/16-D | .3127-.3137 | 42498 | 17 | 2 | 9/16 X 14 |
309 | 3/8-D | .3755-.3765 | 42498 | 17 | 2 | 9/16 X 14 |
318 | 7/16-D | .4380-.4390 | 42498 | 17 | 3 | 9/16 X 14 |
327 | 1/2-D | .5006-.5016 | 42498 | 17 | 3 | 9/16 X 14 |
345 | 5/8-E | .6260-.6270 | 42498 | 20 | 4 | 3/4 X 16 |
354 | 3/4-E | .7515-.7525 | 42498 | 20 | 5 | 3/4 X 16 |
363 | 7/8-F | .8765-.8775 | 42498 | 26 | 6 | 1 X 21 |
372 | 1-F | 1.0015-1.0025 | 42498 | 26 | 7 | 1 X 21 |
Steelmans Extra Shims For Keyway Broaches
STM No. | Broach Size | STM No. | Broach Size |
---|---|---|---|
381 | 1/8-A | 471 | -- |
390 | 1/8-B | 480 | 1/2-D |
399 | 5/32-B | 489 | 5/8-E |
408 | 3/16-B | 498 | 3/4-E |
417 | 3/16-C | 507 | 7/8-F |
426 | 1/4-C | 516 | 1-F |
435 | 5/16-C | 525 | 39448 |
444 | 3/8-C | 534 | 37987 |
453 | 5/16-D | 543 | 39450 |
462 | 3/8-D | 552 | 37257 |
Push and Pull types Involute and Straight Spline, Serration broach, Surface , Keyway, Special Profile Broaches, Keyway, Hexa. Broaches and Standard Broach Sets.Gear Hobs , Gear Cutters .Vertical and Horizontal Broaching Machines , Broach sharpening machines.
Steelmans American Standard Keyway Broaches
STM No. | Broach Size | Tolerance | Tooth Pitch | No.of Teeth | Shims Req'd | Broach Dim. |
---|---|---|---|---|---|---|
201 | 1/16-A | .0625-.0635 | 03/16/15 | 18 | 0 | 1/8 X 5 |
210 | 3/32-A | .0938-.0948 | 03/16/15 | 18 | 0 | 1/8 X 5 |
219 | 1/8-A | .1252-.1262 | 03/16/15 | 18 | 1 | 1/8 X 5 |
0.23 | 3/32-B | .0937-.0947 | 09/01/32 | 16 | 0 | 3/16 X 7 |
237 | 1/B-B | .1252-.1262 | 09/01/32 | 16 | 1 | 3/16 X 7 |
246 | 5/32-B | .1564-.1574 | 09/01/32 | 16 | 1 | 3/16 X 7 |
255 | 3/16-B | .1877-.1887 | 09/01/32 | 16 | 1 | 3/16 X 7 |
264 | 3/16-C | .1877-.1887 | 03/08/15 | 22 | 1 | 3/8 X 12 |
273 | 1/4-C | .2502-.2512 | 03/08/15 | 22 | 1 | 3/8 X 12 |
282 | 5/16-C | .3127-.3137 | 03/08/15 | 22 | 2 | 3/8 X 12 |
291 | 3/8-C | .3755-.3765 | 03/08/15 | 22 | 2 | 3/8 X 12 |
300 | 5/16-D | .3127-.3137 | 05/08/15 | 17 | 2 | 9/16 X 14 |
309 | 3/8-D | .3755-.3765 | 05/08/15 | 17 | 2 | 9/16 X 14 |
318 | 7/16-D | .4380-.4390 | 05/08/15 | 17 | 3 | 9/16 X 14 |
327 | 1/2-D | .5006-.5016 | 05/08/15 | 17 | 3 | 9/16 X 14 |
345 | 5/8-E | .6260-.6270 | 05/08/15 | 20 | 4 | 3/4 X 16 |
354 | 3/4-E | .7515-.7525 | 05/08/15 | 20 | 5 | 3/4 X 16 |
363 | 7/8-F | .8765-.8775 | 05/08/15 | 26 | 6 | 1 X 21 |
372 | 1-F | 1.0015-1.0025 | 05/08/15 | 26 | 7 | 1 X 21 |
Steelmans Extra Shims For Keyway Broaches
STM No. | Broach Size | STM No. | Broach Size |
---|---|---|---|
381 | 1/8-A | 471 | -- |
390 | 1/8-B | 480 | 1/2-D |
399 | 5/32-B | 489 | 5/8-E |
408 | 3/16-B | 498 | 3/4-E |
417 | 3/16-C | 507 | 7/8-F |
426 | 1/4-C | 516 | 1-F |
435 | 5/16-C | 525 | 01/01/08 |
444 | 3/8-C | 534 | 01/01/04 |
453 | 5/16-D | 543 | 01/03/08 |
462 | 3/8-D | 552 | 01/01/02 |
Push and Pull types Involute and Straight Spline, Serration broach, Surface , Keyway, Special Profile Broaches, Keyway, Hexa. Broaches and Standard Broach Sets.Gear Hobs , Gear Cutters .Vertical and Horizontal Broaching Machines , Broach sharpening machines.
Spline, Serration, Surface, Keyway, Round, Square, Hexa broaches
Additional Information:
Delivery Time : 3-4 weeks
Steelmans Standard Inch Square Broaches
STM No. | Square Size | Pilot Diameter | Drill Size | Dimension Across | Corners | Tooth Pitch |
---|---|---|---|---|---|---|
2361 | 42377 | .1250-.1260 | 0.1285 | No. 30 | .1750-.1770 | 42377 |
2370 | 11810 | .1565-.1575 | 0.159 | No. 21 | .2180-.2200 | 11810 |
2379 | 42445 | .1880-.1890 | 0.1935 | No. 10 | .2620-.2640 | 11810 |
2388 | 11871 | .2190-.2220 | 0.228 | No. 1 | .3050-.3070 | 42445 |
2397 | 42373 | .2505-.2515 | 0.2656 | 17/64 | .3500-.3520 | 42445 |
2406 | 11933 | .2815-.2825 | 0.2969 | 19/64 | .4370-.4390 | 42445 |
2415 | 42506 | .3130-.3140 | 0.3281 | 21/64 | .4810-.4830 | 11871 |
2424 | 11994 | .3440-.3450 | 0.3906 | 23/64 | .4810-.4830 | 42373 |
2433 | 42437 | .3755-3765 | 0.4219 | 25/64 | .5230-.5250 | 42373 |
2442 | 13/32 | .4065-.4075 | 0.4531 | 27/64 | .5680-.5700 | 42373 |
2451 | 42567 | .4385-.4395 | 0.5 | 29/64 | .6110-.6130 | 42506 |
2460 | 15/32 | .4690-.4700 | 0.5312 | 42371 | .6560-6580 | 42506 |
2469 | 42371 | .5005-.5015 | 0.5938 | 17/32 | .6970-6990 | 42506 |
2478 | 42629 | .5630-.5640 | 0.6562 | 19/32 | .7860-.7880 | 42437 |
2487 | 42498 | .6260-.6270 | 0.6562 | 21/32 | .8710-.8730 | 42567 |
2496 | 42690 | .6885-.6895 | 0.75 | 42433 | .9610-.9630 | 42567 |
2505 | 42433 | .7510-.7520 | 0.8125 | 13/16 | 1.045-1.047 | 42567 |
2514 | 42559 | .8765-.8775 | 0.9375 | 15/16 | 1.228-1.230 | 42567 |
2523 | 1 | 1.002-1.0030 | 1.0938 | 11691 | 1.403-1.405 | 42567 |
Steelmans HSS Standard Full Square Boraches
STM No. | Square Size | Tolerances | Dimensions Across Corners | Pilot Diam. | Drill Size | Broach Length |
---|---|---|---|---|---|---|
2532 | 42445 | .1880-.1890 | .2628-2632 | 0.187 | 42445 | 7 |
2541 | 42373 | .2505-.2515 | .3513-.3517 | 0.2495 | 42373 | 9 |
2550 | 42506 | .3120-.3140 | .4375-.4380 | 0.312 | 42506 | 11 |
2559 | 42437 | .3755-.3765 | .5243-.5247 | 0.3745 | 42437 | 13 |
2568 | 42371 | .5005-.5015 | .6980-.6990 | 0.4995 | 42371 | 15 |
Steelmans HSS Metric Square Broaches
STM No. | Square Size | Tolerances | Tolerances (Inches) | Dimensions Across Corners | Pilot Diam. | Drill Size | Broach Length |
---|---|---|---|---|---|---|---|
2577 | 4 mm | .1580-.1585 | .2080-.2090 | 0.1655 | 0.1655 | 4.2 | 6 |
2586 | 5 mm | .1973-.1983 | .2645-.2655 | 0.2047 | 0.2047 | 5.2 | 7 |
2595 | 6 mm | .2367-.2377 | .3295-.3300 | 0.25 | 0.25 | 6.35 | 7 |
2604 | 8 mm | .3155-.3165 | .4405-.4410 | 0.3267 | 0.3267 | 8.3 | 9 |
2613 | 10 mm | .3942-.3952 | .5435-.5445 | 0.4057 | 0.4057 | 10.3 | 11 |
2622 | 12 mm | .4729-.4739 | .6540-.6550 | 0.4921 | 0.4921 | 12.5 | 13 |
2631 | 14 mm | .5517-.5527 | .7700-.7710 | 0.5905 | 0.5905 | 15 | 15 |
2640 | 16 mm | .6310-.6320 | .8780-.8790 | 0.6693 | 0.6693 | 17 | 17 |
2649 | 18 mm | .7092-7102 | .9880-.9890 | 0.7874 | 0.7874 | 20 | 19 |
2658 | 20 mm | .7879-.7889 | 1.0990-1.1000 | 0.8661 | 0.8661 | 22 | 19 |
2667 | 22 mm | .8666-.8676 | 1.2110-1.2120 | 0.9448 | 0.9448 | 24 | 24 |
2676 | 24 mm | .9454-.9464 | 1.3170-1.3180 | .1.0236 | .1.0236 | 26 | 25 |
2685 | 25 mm | .9848-.9858 | 1.3730-1.3740 | 1.063 | 1.063 | 27 | 25 |
Steelmans HSS Standard Inch Square Broaches
STM No. | Square Size | Pilot Diameter | Drill Size | Dimension Across | Corners | Tooth Pitch | Broach Length |
2361 | 1/8 | .1250-.1260 | .1285 | No.30 | .1750-.1770 | 1/8 | 5 |
2370 | 5/32 | .1565-.1575 | .1590 | No.21 | .2180-.2200 | 5/32 | 6 |
2379 | 3/16 | .1880-.1890 | .1935 | No.10 | .2620-.2640 | 5/32 | 6 |
2388 | 7/32 | .2190-.2200 | .2280 | No.1 | .3050-.3070 | 3/16 | 7 |
2397 | 1/4 | .2505-.2515 | .2656 | 17/64 | .3500-.3520 | 3/16 | 7 |
2406 | 9/32 | .2815-.2825 | .2969 | 19/64 | .3930-.3950 | 3/16 | 8 |
2415 | 5/16 | .3130-.3140 | .3281 | 21/64 | .4370-.4390 | 7/32 | 8 |
2424 | 11/32 | .3440-.3450 | .3906 | 23/64 | .4810-.4830 | 1/4 | 10 |
2433 | 3/8 | .3755-.3765 | .4219 | 25/64 | .5230-.5250 | 1/4 | 10 |
2442 | 13/32 | .4065-.4075 | .4531 | 27/64 | .5680-.5700 | 1/4 | 11 |
2451 | 7/16 | 4385-.4395 | .5000 | 29/64 | .6110-.6130 | 5/16 | 11 |
2460 | 15/32 | .4690-.4700 | .5312 | 1/2 | .6560-.6580 | 5/16 | 12 |
2469 | 1/2 | .5005-.5015 | .5938 | 17/32 | .6970-.6990 | 5/16 | 12 |
2478 | 9/16 | .5630-.5640 | .6562 | 19/32 | .7860-.7880 | 3/8 | 15 |
2487 | 5/8 | .6260-.6270 | .6562 | 21/32 | .8710-.8730 | 7/16 | 17 |
2496 | 11/16 | .6885-.6895 | .7500 | 3/4 | .9610-.9630 | 7/16 | 18 |
2505 | 3/4 | .7510-.7520 | .8125 | 13/16 | 1.045-1.0470 | 7/16 | 18 |
2514 | 7/8 | .8765-.8775 | .9375 | 15/16 | 1.228-1.2300 | 7/16 | 23 |
2523 | 1 | 1.002-1.0030 | 1.0938 | 1-3/32 | 1.403-1.4050 | 7/16 | 25 |
Steelmans HSS Standard Full Square Boraches
STM No. | Size Square | Tolerances | Dimensions Across Corners | Pilot D iam. | Drill Size | Broach Length |
2532 | 3/16 | .1880-.1890 | .2628-.2632 | .1870 | 3/16 | 7 |
2541 | 1/4 | .2505-.2515 | .3513-.3517 | .2495 | 1/4 | 9 |
2550 | 5/16 | .3120-.3140 | .4375-.4380 | .3120 | 5/16 | 11 |
2559 | 3/8 | .3755-.3765 | .5243-.5247 | .3745 | 3/8 | 13 |
2568 | 1/2 | .5005-.5015 | .6980-.6990 | .4995 | 1/2 | 15 |
Steelmans HSS Metric Square Broaches
STM No. | Size Square | Tolerances | Tolerances (Inches). | Dimensions Across Corners | Pilot Diam. | Drill Size | Broach Length |
2577 | 4MM | .1580-.1585 | .2080-.2090 | .1655 | .1655 | 4.2 | 6 |
2586 | 5MM | .1973-.1983 | .2645-.2655 | .2047 | .2047 | 5.2 | 7 |
2595 | 6MM | .2367-.2377 | .3295-.3300 | .250 | .250 | 6.35 | 7 |
2604 | 8MM | .3155-.3165 | .4405-.4410 | .3267 | .3267 | 8.3 | 9 |
2613 | 10MM | .3942-.3952 | .5435-.5445 | .4057 | .4057 | 10.3 | 11 |
2622 | 12MM | .4729-.4739 | .6540-.6550 | .4921 | .4921 | 12.5 | 13 |
2631 | 14MM | .5517-.5527 | .7700-.7710 | .5905 | .5905 | 15.0 | 15 |
2640 | 16MM | .6310-.6320 | .8780-.8790 | .6693 | .6693 | 17.0 | 17 |
2649 | 18MM | .7092-.7102 | .9880-.9890 | .7874 | .7874 | 20.0 | 19 |
2658 | 20MM | .7879-.7889 | 1.0990-1.1000 | .8661 | .8661 | 22.0 | 19 |
2667 | 22MM | .8666-.8676 | 1.2110-1.2120 | .9448 | .9448 | 24.0 | 24 |
2676 | 24MM | .9454-.9464 | 1.3170-1.3180 | 1.0236 | 1.0236 | 26.0 | 25 |
2685 | 25MM | .9848-.9858 | 1.3730-1.3740 | 1.0630 | 1.0630 | 27.0 | 25 |
Manufacturers and exporters of Round, Spline, Surface,
keyway broach.
Specifications
STM No. | Nominal Diameter | Tolerances | Pilot Diameter | Drill Size | Broach Length |
---|---|---|---|---|---|
2991 | 42373 | .2510-.2505 | 0.2344 | 15/64 | 6 |
3000 | 42506 | .3135-.3130 | 0.2969 | 19/64 | 6 |
3009 | 42437 | .3760-.3755 | 0.3594 | 23/64 | 7 |
3018 | 42567 | .4385-.4380 | 0.4219 | 27/64 | 7 |
3027 | 42371 | .5010-.5005 | 0.4844 | 31/64 | 10 |
3036 | 42629 | .5635-.5630 | 0.5469 | 35/64 | 10 |
3045 | 42498 | .6260-.6255 | 0.6094 | 39/64 | 10 |
3054 | 42690 | .6885-.6880 | 0.6719 | 43/64 | 10 |
3063 | 42433 | .7510-.7505 | 0.7344 | 47/64 | 11 |
3072 | 13/16 | .8132-.8130 | 0.7969 | 51/64 | 11 |
3081 | 42559 | .8765-.8760 | 0.8594 | 55/64 | 11 |
3090 | 15/16 | .9390-.9380 | 0.9219 | 59/64 | 11 |
3099 | 1 | 1.0015-1.0005 | 0.9844 | 63/64 | 11 |
Push and Pull types Involute and Straight Spline, Serration broach, Surface , Keyway, Special Profile Broaches, Keyway, Hexa. Broaches and Standard Broach Sets.Gear Hobs , Gear Cutters .Vertical and Horizontal Broaching Machines , Broach sharpening machines.
The racks are produced to the highest accuracy and quality standards in minimal lead times by using modern CAD/CAM systems and by carrying out regular post operation quality checks throughout the production process.
We are a reputed Manufacturer, Exporter and Supplier of Spline Rolling Rack from Punjab, India. Fabricated skillfully under the guidance of professionals, our range of Spline Rolling Rack is preferred by industries all over the world. We are proficient in delivering small or bulk orders of Spline Rolling Rack within the promised time.
More about Spline Rolling Rack :
Involute, Straight, Serration Broaches
A Complete range of Spline-Involute, Parallel and Trapezoidal, Serrations, Ratchet, specially designed to suit the Component specifications. Available in push or pull type desigh. We regularly manufacturer spline broaches for precision-made Steering Knuckle Arm, Constant Mesh Gear, Front Axle, Lift Arm, Depth Control Cap, Bull Gear and Differential Lock Clutch centre, Fly/Sprocket Wheel Ratchet components.
A Complete range of Spline Broaches :
Push and Pull types Involute and Straight Spline, Serration broach, Surface , Keyway, Special Profile Broaches, Keyway, Hexa. Broaches and Standard Broach Sets.Gear Hobs , Gear Cutters .Vertical and Horizontal Broaching Machines , Broach sharpening machines.
Specifications
No |
Keyway Width |
Body Diameter |
Dimension |
Tooth Pitch |
Broach Length |
---|---|---|---|---|---|
2244 |
42385 |
42445 |
0.224 |
42445 |
6 |
2253 |
42385 |
42373 |
0.287 |
42445 |
7 |
2262 |
42377 |
42437 |
0.437 |
42373 |
9 |
2271 |
42377 |
42371 |
0.565 |
42437 |
12 |
2280 |
42377 |
42629 |
0.63 |
42437 |
12 |
2289 |
42377 |
42498 |
0.693 |
42437 |
12 |
2298 |
42445 |
42498 |
0.716 |
42437 |
15 |
2316 |
42445 |
42433 |
0.844 |
42437 |
15 |
2334 |
42445 |
42559 |
0.97 |
42437 |
15 |
2352 |
42373 |
1 |
1.121 |
42437 |
18 |
Steelmans HSS Standard One Pass Keyway Broaches
STM No. | Keyway Width | Tooth Pitch | Broach Dimensions |
---|---|---|---|
2190 | 42377 | 11933 | 3/8 x 15 |
2199 | 11810 | 11933 | 3/8 x 15 |
2208 | 42445 | 11933 | 3/8 x 15 |
2217 | 42373 | 11933 | 3/8 x 15 |
2226 | 42506 | 11933 | 3/8 x 15 |
2235 | 42437 | 11933 | 3/8 x 15 |
Steelmans HSS Standard Keyseating Broaches
STM No | Keyway Width | Tooth Pitch | Overall Height at Teeth | Body Width | Broach Length |
---|---|---|---|---|---|
2028 | 42385 | 42437 | 42437 | 42445 | 16 |
2037 | 11749 | 42437 | 42437 | 42445 | 16 |
2046 | 42377 | 42437 | 42567 | 42445 | 16 |
2055 | 11810 | 42437 | 42371 | 11810 | 16 |
2064 | 42445 | 42437 | 42629 | 42445 | 16 |
2073 | 42373 | 42437 | 42433 | 42373 | 16 |
2082 | 42373 | 42437 | 42433 | 42373 | 20 |
2091 | 42506 | 42437 | 42559 | 42506 | 16 |
2100 | 42506 | 42437 | 42559 | 42506 | 20 |
2109 | 42437 | 17/32 | 42559 | 42437 | 16 |
2118 | 42437 | 17/32 | 42559 | 42437 | 20 |
2127 | 42567 | 17/32 | 1 | 42567 | 20 |
2136 | 42371 | 17/32 | 1 | 42371 | 20 |
2145 | 42629 | 17/32 | 1 | 42629 | 20 |
2154 | 42498 | 17/32 | 1 | 42498 | 20 |
2163 | 42433 | 17/32 | 1 | 42433 | 20 |
2172 | 42559 | 17/32 | 1 | 42559 | 20 |
2181 | 1 | 17/32 | 1 | 1 | 20 |
With our expertise in Broach manufacturing for more than 35 years and with the latest technology using CAD and CAM can manufacture any kind of Special Profile Broaches exactly matching the blueprints of your components.
Additional Information:
Delivery Time : 3-4 weeks
Our company has made its mark as the distinguished Manufacturer, Exporter and Supplier of Special Profile Broaches based in Punjab, India. Our skilled engineers use the latest technology such as CAD and CAM for fabricating accurate Special Profile Broaches according to customer specification. Customers across the world can rely on us for handling small or bulk orders of Special Profile Broaches and ensuring delivery on timely basis.
Steelmans manufacture and export the complete range of :
Product Details