Owing to our in-depth domain expertise, we are offering a premium quality Steel Sleeper (For Safe Deposit Locker Cabinets) which is precisely designed for safety lockers. Manufactured under the guidance of skilled professionals, our offered sleepers are in accordance with set industry standards. In line with clients' detailed specifications, we provide these sleepers to our clients in different customized forms. Our clients can avail these sleepers from us at affordable prices.

The Safe Deposit Locker Cabinets should be kept at a height and away from the direct contact of walls and floors for the following Reasons:

• To keep them safe from water in the vault in case of flooding.
• To prevent moisture of walls and floors from damaging the locker cabinets.
• To raise the locker height for the convenience of renters having lockers in the lower rows.

• Smooth edges
• Corrosion resistance
• Accurate dimensions

• Height: 063 mm
• Width: 100 mm
• Depth: 600 mm

To eneble the renters to oprate safe deposit lockers at upper level.

• Easily movable
• Non-slip treads
• Ruggedness

• Height: 1615 mm
• Width: 0660 mm
• Depth: 1000 mm
• Color: Powder coated

We are engaged in offering an impeccable range of Air Ventilator that facilitates for air circulating according to vault room and other atmospheric requirements. Manufactured using the quality assured raw material, our ventilator is available in various specifications. In addition to this, the provided ventilator is highly acclaimed by our clients for its smooth finish and low maintenance. Our esteemed clients can avail this ventilator from us at market-leading prices.

• Modular construction
• Strong & durable
• Easy to install

• 405 X 405 X 305 mm (Approx.)

This compact table has a steel encloser on 3 sides and on the top to provide privacy to the renters examining their possessions.

• Durable finish
• Fine edges
• Easy to move

• Durable finish
• Fine edges
• Easy to move

The lockers are manufactured as per IS: 5244. The two sides, back and top of the locker cabinet are fabricated from tested quality 5 mm thick M.S. plate. The partitions and the shelves are of 2 mm HR prime quality M.S. sheet. The door plate of each locker is 10 mm M.S. plate. The hinge arrangement, such that it provides sufficient resistant against tempering attack of common hand tools. The shelves of the locker are reinforced at the front with the 50 X 10 mm bright solid flats.

Each locker is fitted with high quality first class unpickable dual control 7 leave key lock. These locks are self locking so that the custodian does not have to re-lock the locker with his key after the customer has locked it. The mechanism of the lock is such that the customer shall not be able to withdraw his key unless the locker has been re-locked fully. Once the customer has locked the locker, the same cannot be opened unless the custodian turns in his key to take off his control. We can also provide personal lock known as renter lock from inside for total protection and customer retains the key. Over all pad locking system can also be provided so that customer can use his own padlock for more confidence.

The size and dimension of locker is made as per IS: 5244. In addition to it, we also manufactur safe deposit lockers as per the customers choice and specifications for the best and economical use of available space.

All steel components are given a through anti-corrosion treatment. The chemicals used for this treatment are exclusively formulated through careful experimentation at our plant. All steel components, free from grease and rust, are treated for formation of rust preventing iron-phosphate film. This vital film is protected through a process of passivation, the final step of the treatment. Immediately afterwards, the steel components are given coats of rust inhibiting zinc chromate primer for more protection against rust. Then the locker cabinet is given coats of high quality paints. Doors and hinges are decorated by powder coated 0.71 mm thick aluminum cover.

The outer layer of the door slab is of tough tested quality of M.S. Plate. It is further reinforced by a composite 100 mm thick layer of double duty barrier material and layers of flame and arc resistant (special) alloy which provides dependable protection again fire and attack of power drilling, oxy-acetylene flame and arc cutting. This dual protection is provided over the entire lock case.

Tested quality 10 mm thick M.S. plate is used for fabricating the one-piece bent angle door frame. For strength and rigidity the door frame is suitably, reinforced along the height and width. A special Box-jamb is welded to the frame to provide strong rebate for the shooting bolts.

The door is provided with 12 shooting bolt (each of 38 mm dia.) six in front, six at the rear, which slides behind the tough Box-jamb rebate. These bolts can be activated simultaneously by the movement of handle. Any pressure exerted on the lock bolt on one side automatically bring into play equal balancing pressure on the opposite side to neutralize and defeat the attempts to dislodge the lock. The doors are fitted with two superior quality dual control precision 10-lever locks along with S.S. keys in duplicate. At extra cost, if specified at the time of placing of the order, 3 or 4-wheel numerical combination lock which offer nearly 100 million combination for setting and resetting can be provided or superior quality imported Time Lock with multiple clock movements can be fitted.

With a standard feature on all models of door, this sensitive device is triggered-of when an attack is attempted on the lock through the keyhole with any instrument. This automatic re-locking device guards all the key locks.

The hinges are properly aligned both vertically and horizontally for ensuring smooth and easy operation of the door. The hinge enable the door shutter to be adjusted vertically so that it maintains accurate fit with the frame.

For convenience of working in the strong room, a well designed grill gate is provided which is secured with 8-lever lock operated from both sides. The main doors always open outside and the grill gate inside. All standard doors are hung on the right. However, if specified at the time of placing the order, the door and the grill gate can be hung on the left.

All steel component are given a through anti corrosion treatment. The chemicals used for this treatment are exclusively formulated through careful experimentation at our plant. All steel components free from grease and rust are treated for formation of rust preventing iron-phosphate film. This vital film is protected through a process of passivation, the final step of the treatment. Immediately afterward, the steel components are given coats of rust inhibiting zinc chromate primer for more protection against rust. Then the door is given coats of high quality paints. Alternatively the doors can be finished by cladding in stainless steel at an extra cost.

Owing to our in-depth domain expertise, we are offering a premium quality Steel Sleeper (For Safe Deposit Locker Cabinets) which is precisely designed for safety lockers. Manufactured under the guidance of skilled professionals, our offered sleepers are in accordance with set industry standards. In line with clients' detailed specifications, we provide these sleepers to our clients in different customized forms. Our clients can avail these sleepers from us at affordable prices.

The Safe Deposit Locker Cabinets should be kept at a height and away from the direct contact of walls and floors for the following Reasons:

• To keep them safe from water in the vault in case of flooding.
• To prevent moisture of walls and floors from damaging the locker cabinets.
• To raise the locker height for the convenience of renters having lockers in the lower rows.

• Smooth edges
• Corrosion resistance
• Accurate dimensions

• Height: 063 mm
• Width: 100 mm
• Depth: 600 mm

To eneble the renters to oprate safe deposit lockers at upper level.

• Easily movable
• Non-slip treads
• Ruggedness

• Height: 1615 mm
• Width: 0660 mm
• Depth: 1000 mm
• Color: Powder coated

We are engaged in offering an impeccable range of Air Ventilator that facilitates for air circulating according to vault room and other atmospheric requirements. Manufactured using the quality assured raw material, our ventilator is available in various specifications. In addition to this, the provided ventilator is highly acclaimed by our clients for its smooth finish and low maintenance. Our esteemed clients can avail this ventilator from us at market-leading prices.

• Modular construction
• Strong & durable
• Easy to install

• 405 X 405 X 305 mm (Approx.)

This compact table has a steel encloser on 3 sides and on the top to provide privacy to the renters examining their possessions.

• Durable finish
• Fine edges
• Easy to move

• Durable finish
• Fine edges
• Easy to move

The lockers are manufactured as per IS: 5244. The two sides, back and top of the locker cabinet are fabricated from tested quality 5 mm thick M.S. plate. The partitions and the shelves are of 2 mm HR prime quality M.S. sheet. The door plate of each locker is 10 mm M.S. plate. The hinge arrangement, such that it provides sufficient resistant against tempering attack of common hand tools. The shelves of the locker are reinforced at the front with the 50 X 10 mm bright solid flats.

Each locker is fitted with high quality first class unpickable dual control 7 leave key lock. These locks are self locking so that the custodian does not have to re-lock the locker with his key after the customer has locked it. The mechanism of the lock is such that the customer shall not be able to withdraw his key unless the locker has been re-locked fully. Once the customer has locked the locker, the same cannot be opened unless the custodian turns in his key to take off his control. We can also provide personal lock known as renter lock from inside for total protection and customer retains the key. Over all pad locking system can also be provided so that customer can use his own padlock for more confidence.

The size and dimension of locker is made as per IS: 5244. In addition to it, we also manufactur safe deposit lockers as per the customers choice and specifications for the best and economical use of available space.

All steel components are given a through anti-corrosion treatment. The chemicals used for this treatment are exclusively formulated through careful experimentation at our plant. All steel components, free from grease and rust, are treated for formation of rust preventing iron-phosphate film. This vital film is protected through a process of passivation, the final step of the treatment. Immediately afterwards, the steel components are given coats of rust inhibiting zinc chromate primer for more protection against rust. Then the locker cabinet is given coats of high quality paints. Doors and hinges are decorated by powder coated 0.71 mm thick aluminum cover.

The outer layer of the door slab is of tough tested quality of M.S. Plate. It is further reinforced by a composite 100 mm thick layer of double duty barrier material and layers of flame and arc resistant (special) alloy which provides dependable protection again fire and attack of power drilling, oxy-acetylene flame and arc cutting. This dual protection is provided over the entire lock case.

Tested quality 10 mm thick M.S. plate is used for fabricating the one-piece bent angle door frame. For strength and rigidity the door frame is suitably, reinforced along the height and width. A special Box-jamb is welded to the frame to provide strong rebate for the shooting bolts.

The door is provided with 12 shooting bolt (each of 38 mm dia.) six in front, six at the rear, which slides behind the tough Box-jamb rebate. These bolts can be activated simultaneously by the movement of handle. Any pressure exerted on the lock bolt on one side automatically bring into play equal balancing pressure on the opposite side to neutralize and defeat the attempts to dislodge the lock. The doors are fitted with two superior quality dual control precision 10-lever locks along with S.S. keys in duplicate. At extra cost, if specified at the time of placing of the order, 3 or 4-wheel numerical combination lock which offer nearly 100 million combination for setting and resetting can be provided or superior quality imported Time Lock with multiple clock movements can be fitted.

With a standard feature on all models of door, this sensitive device is triggered-of when an attack is attempted on the lock through the keyhole with any instrument. This automatic re-locking device guards all the key locks.

The hinges are properly aligned both vertically and horizontally for ensuring smooth and easy operation of the door. The hinge enable the door shutter to be adjusted vertically so that it maintains accurate fit with the frame.

For convenience of working in the strong room, a well designed grill gate is provided which is secured with 8-lever lock operated from both sides. The main doors always open outside and the grill gate inside. All standard doors are hung on the right. However, if specified at the time of placing the order, the door and the grill gate can be hung on the left.

All steel component are given a through anti corrosion treatment. The chemicals used for this treatment are exclusively formulated through careful experimentation at our plant. All steel components free from grease and rust are treated for formation of rust preventing iron-phosphate film. This vital film is protected through a process of passivation, the final step of the treatment. Immediately afterward, the steel components are given coats of rust inhibiting zinc chromate primer for more protection against rust. Then the door is given coats of high quality paints. Alternatively the doors can be finished by cladding in stainless steel at an extra cost.