Our Products
STECH ENGINEERS DIN Abrasion tester (Abraser / Abrader), which is the original product developed in Germany and sold worldwide, is designed to conform to the ASTM D5963 and IS0 4649 standards (ISO 4649 has replaced the DIN 53516 standard). This top quality and highly popular abrasion tester will allow you to measure the abrasion resistance of rubbers (vulcanized thermo set rubbers and thermoplastic elastomers) that are subject to abrasive/frictional wear in their actual service, such as tires, conveyor drive belts, and shoe soles. Since wear is always a result of abrasion, different test methods have been developed for the simulation of long term wear. | ||||||||||||||||||||||||||||||||||||||||||||||
The method conforming to ASTM D5963 / ISO 4649 has proven to be the best way of simulating long term wear. This method enables comparative tests for the control of the uniformity of a specific material. The achieved test results provide important parameters in respect to the wear of elastomers in practical use. The abrasion resistance is measured by moving a test piece across the surface of an abrasive sheet mounted to a revolving drum, and is expressed as volume loss in cubic millimeters or abrasion resistance index in percent. For volume loss, a smaller number indicates better abrasion resistance, while for the abrasion resistance index, a smaller number denotes poorer abrasion resistance. The DIN Abrasion tester can also be used for comparative measurements on other materials such as plastics, chalk or painted surfaces. Accessories for DIN Abrasion Tester
|
STECH ENGINEERS Digital Spring Testing Machine is designed to test the compression load vs. length and tension load vs. length in kgf. The extension and compression length is monitored in the digital display in mm by 0.01mm and the force is displayed in kgf the machine can also use for tensile and elongation of various materials and other force related test can also done with specified fixtures. | ||||||||||||
Display unit: The display unit shows the force in kg and linear measurement in millimeters by 0.01mm
|
Computerized Tensile Testing Machine provides two different load cell connectors to extend testing range with a precision result. This testing machine especially be used in weak raw material with a strong finished products. Floor type is most used for Cable, Wire, Screw parts and Textiles. We provide extensive range of Grips/Fixture, Load Cells, Extensometers alongwith excellent service backup. Its range is designed for quick and reliable Tensile, Compression, Flexure ( Bending ), Shear, Peel, Fatigue cycling and Constant Load tests on Metals, Composites, Alloys, Plastics, Elastomers, Textiles and finished products.
Features of the UTM | |||||||
The Tester is constructed in rigid MS body with double screws, plated parts and duly Powder Coated. Tester can carry our different tests upto specified load. The test result will be showed in the display of the Controller and PC will be attached to the controller and graph will be plotted in Computer with the software provided, the result including a set of data can be stored or can take print out by attaching a printer to PC. | |||||||
Features of the System | |||||||
16 x 2 backlit LCD Display Micro controller based circuitry, Membrane key board for programming & operation.
|