GST : 07AHUPR4690N1Z7
Verified
Write a Review
Our Products
Our Complete range of products are GEL ROCKER SHAKER, KAHN RECIPROCATING SHAKING MACHINE, 40 Tubes Heating Block Kjeldahl Digestion Unit and Laboratory Oven.
The overall improvement in its optical design, ensures permanent and undisturbed focus, Its highly accurate glass scale is divided to read angular degrees and also carries sugar scale in I.S.S. Units. The angular scale from 0 to 360 degree is sub divided to 1 degree to enable direct reading to 0.05 degree and by estimation to 0.02 sugar degrees. The sugar scale from 30 degree to120 degree. Supplied Complete with polarimeter tube, Sodium Lamp, transformer instruction manual.
Other Details
Optional Accessories
Based on the rotating disc-splash plate principal, It produce only super fine particles of micron size, which become part of the atmosphere, thereby reaching every corner of the room, resulting in uniform humidity. Due to the upward thrust imparted to the micron sized water droplets, by high speed motorized unit, they remain suspended in the atmosphere for longer duration of time. Time unit is capable of atomizing upto 3 liters of water in an hour at full evaporation in the driest possible ambient conditions. The unit has body made up of S. Steel unit is effective for an enclosed space of volume upto 40 cu. mts. The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to ensure drop less fumigation. To work on 220/230 volts. supply.
With Electronic Regulator, Very easy to operate with an accuracy of 0.2% by direct reading, 0.1% by estimation. Complete with ‘L’ bend thermometer, 10 disposable pans, one tweezer, and instruction manual.
With the aim of delivering qualitative products, we are engaged in offering our clients with an excellent quality Ice Lined Refrigerators For Vaccine Storage. These are widely demanded in clinics, hospitals, blood banks, research institutes etc. and are ideal for storing vaccines.
These specially designed cabinets provide a wash of sterile filtered with Outer body made up of Mild Steel powder coated painted/Stainless steel-304 and Inner body made up of Stainless Steel-304. Clean air through HEPA Filters having an efficiency of 99.97% down to 0.3 micron particle size. This cabinet protects dust and other particulates on clean room garments or other materials. For use in the change Room for garment storage & inside the clean room for storage of materials.
Fitted with automatic 4 digits LED Digital Display. Counting plate with illuminated standard wolfhugel ruling ensures clarity differentiated and sharply defined colonies. Each touch of marking pencil in the digit is increments the colony count by ‘1’ and the glowing LED Display depicts the total colony count. Maximum colony count possible upto 9999 Provided with a manual reset of digital display, ON/OFF Switch, counting plate, 100 m.m. dia lens, cord and plug. To work on 220 V.A.C.
Unique feature condicitivity meter with linear scale operates on AC/DC of 9 volts battery cell.Non Corrosive Regeneration Tank. High capacity cation & Anion exchange resign upflow treatment. Portable metallic stand with wheels. Can directly be connected to tap water.
Model No. Output/Hour
Modified Macintosh and Fields pattern has all metal construction consisting of a S.S. Jar with a top flanges recessed for a thyroidal rubber sealing ring and a cover held in place by a strong bridge clamp. The cover is fitted with two needle valves for evaluation and a sachet containing a catalyst. A side arm on the jar is Provided for connecting to Semisolid Lucas Indicator. (The unit is supplied without Semi-Solid Lucas Indicator). Supplied complete with pressure-cum-vacuum gauge.
Capacity up to 2 liters :
Melting point is displayed on the 3½ digit mounted on the front panel, The instrument basically consists of a miniature furnace with controllable heating rate arrangement, an air circulating arrangement and a digital temp. indicating circuitry with necessary controls, Temp. at the melting point is latched on the digital display and the furnace is automatically cut-off. The rate of rise in temp. can be precisely controlled by a knob on the front panel. The instrument gives audio & visual indications, on reaching the temp. at which the sample melts. The temp. indicating point of the sample remains displayed on the panel till the clear press switch marked ‘’CLEAR’’ is operated. The range of the instruments is 40°C to 350°C. Readability is 1.0°C with accuracy of ± 1°C. The unit works on 230 Volts / 50Hz. A.C.
We are one of the leading organizations for providing Leak Test Apparatus that is in huge demand in the market. This product perfectly suits the clients’ needs and expectations as it features an ideal blend of advanced technology, high efficiency, and low operational cost. Besides, these apparatus bring satisfactory experience to the clients by performing at a high level.
For determination of melting points upto 350°C. The mounted block is illuminated from below by a lamp fixed in its housing. The aluminium block accept three capillary tubes and mercury thermometer. The temp. is regulated by energy regulator fitted to the unit. The lamp. provides uniform and shadow less regulator fitted to the unit. Supplied without capillary tubes and thermometer.
Optional Accessories
Vacuum Pumps are mounted on a heavy steel base plate, and have a wide range of oil sealed pumps. Fitted with heavy duty electric motor, all pumps are V-Belt driven at a speed of 1400 RPM. Pumps are fabricated out of high grade cast iron and are worked on sophisticated machines to give accuracy in microns, thus leading to very high sustained vacuum. Supplied in single stage or double stage models. All vacuum pumps are fitted with belt guard, vacuum gauge as a standard feature. To work on 220/230 volts A.C. Supply.
It has a compact stirring device utilizing a rotating magnetic fied (created by a PERMANENT MAGNET) which induces variable speed stirring action. Stirring is accomplished by means of small teflon rotor, which when placed in the liquid to be stirred is capable of rotation by magnetic field applied from below the container. The unit is fitted with pilot lamp. To work on 220/230 Volts. A.C.
Capacity
The motor stirrer having maximum speed upto 4000 r.p.m. unit is clamped to a C.P. rod fitted on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed Motor with speed regulator is fitted with S.S. Stirrer rod to give smooth and noiseless operation.
For use in Biotechnology/Tissue Culture research and production. These are compact stainless Steel units, and can be placed on Laminar Air Flow Benches. Glass Bead Sterilizers are a quick, Easy and Accurate alternative to traditional methods of sterilization. It destruct all micro organizam within seconds. The unit is ready within 30 minutes after switching on and ensures total sterilization. These are incorporated with an imported thermostat, which maintains the set temperature with an accuracy of + 1 of the preset temperature range.
Kahn racks, bottles or flasks of different sizes can be shaken by adjusting the compartments provided on the shaking rack. DC Motor Drive with continuously variable electronic speed regulator, The rate of motion can be adjusted by electronic speed regulator from 140 to 250 r.p.m approximately. To work on 220/230 volts. A.C. supply.
Double Walled, inner made of thick Stainless Steel, outer made of thick best quality mild steel duly powder coated painted, properly insulated with 75mm glass wool to prevent any heat loss. Provided with full view glass door for inspection of material in the both chambers. Provided with dual chamber of inner size 555 x 605 x 910 mm (WxDxH) each. Each chamber is provided with 6/14 perforated Stainless steel trays. (With Standard configuration only 6 trays are provided in each chamber). Each chamber is provided with Inner full view transparent glass door and outer double walled, metallic door with best quality handle, leak proof magnetic gasket, lock etc. Whole unit is mounted on castor wheels for easy mobility. Both the inner chambers are provided with water resorvior (Tank) made of S. Steel and provided with constant level of water, drainage made of brass is provided. Temp. range is from 5°C to 50°C in one chamber and ambient and above in other chamber i.e. one chamber is provided with heating and cooling system, and other chamber is provided with only heating system. Cooling is done with the help of ISI mark compressor relay, capacitor etc. Provided with fan cooled condensor. Provided with separate and temperature is controlled by microprocessor PID Controller. This temp. Controller is provided with unique facility of time delay relay which automatically controls the accuracy of temp. The resolution of digital controller is 0.1°C. Humidity is from ambient to 90% RH (Adjustable) and is controlled by Humidistat with an accuracy of +/- 3% and Humidity is generated through a S. Steel reservoir placed in the bottom of the main chamber and is generated through Imported Mist Generator. Provided with motorized powerful two number fans in each chamber for uniform air circulation. Each chamber is fitted with separate controls for heating cooling temp. setting humidity setting, different display of parameters and is provided in the front of the each chamber. Works on 220 V 50 Hz, Single Phase AC.
Used for measuring refractive index in the range 1.3 to 1.7 with an accuracy of 0.001 direct on scale and 0.0001 by estimation, Sugar percentage range of 0 to 95% with an accuracy of 1% on scale and 0.1 by estimation can be measured. Complete with test piece, contact liquid and thermometer in wooden cabinet.
If has a double scale. One is Oil Scale (Butyro Scale) having range of 0 to 100 and accuracy of ± 0.1 read directly on the micrometer. The other is sugar scale having a range of 50-80% with an accuracy of ± 1% also read direct on scale.
Double walled Inside chamber made of Stainless Steel, outer made of M.S. Sheet duly powder coated. Temperature is controlled by Microprocessor PID digital controller and its range 50C above ambient to 90°C and with an accuracy of + 0.50C. Provided with a carrier to hold 6 nos. of bottles with size 60mm dia x 200mm depth and it rotates at speed of 2 to 16 rpm. Provided with Air circulation fan to ensure temperature uniformity Rotor can. Provided with glass window in the door to inspect the chamber. Works on 20/230 Volts AC
Available In:
These are double walled units with outer made of M.S. sheet duly powder painted and inner made of heavy gauge S. Sheet. Gap between the two walls is duly filled with high grade glass wool to avoid thermal loss. Temperature range from ambient to 150°C is controlled by Digital Temperature Controller with an accuracy of ± 1°C. It is capable of with standing a high vacuum. Provided with vacuum gauge, see through transparent window of toughened glass and one shelf. To work on 220/230 Volts A.C. supply. (Without Vacuum Pump)
For continuous heating upto 350°C. The body is made of specially designed perforated P.C.R.C. Sheet painted with attractive stove enamel with insulated elements. To work on 220/230 volts A.C.
The top cast iron heating plate is round having 20 cm. Dia, with heating elements of 1.5 kw rating. Temperature is controlled by energy regulator upto 350°C.
The Chamber is fitted with a hopper provided with a cover. Three delivery S.S. Sieves, Brush, L-N key & Plastic receiver are supplied. A removable plexi-glass plate permits observation during operation. Fitted with AUE/GE/CROMPTON/EQUIVALENT MOTOR.
For unattended grinding of non gummy and non fibrous materials. Extensively used for preparing coal samples for calorific tests. The motor revolves and the pestle moves back and fourth in a pattern reaching all parts of the mortar. Its metallic housing with a F.H. Motor driven detachable turn table of cast aluminum has adjustable posts to hold mortars of 75 to 135 m.m. dia. They arm of the pestle drivintg mechanism has inged, heavy head which can be raised to inspect or remove the sample or additional material to be added as disered. A build-in timer permits selection of grinding operation upto 60 min. The grinding vessel and mortar are all completely covered by a clear acrylic cover. To operate on 220 V.A.C.
Suitable for carrying out different quality control tests under controlled conditions of temperature & humidity. Inner chamber consists of S.S. & outer wall of M.S. sheet duly powder coated. The gap of 75 m.m. between the outer & inner wall is fitted with special grade glass wool/puff insulation to prevent termal losses. A self cooler air circulation fan is fitted to maintain uniform temperature & humidity conditions throughout the chamber temp. range from 5ºc to 60ºc is controlled by MICRO PROCESSOR BASED PID CONTROLLER with the accuracy of ±0.5ºc. Temp. Humidity is controlled through the desire set humidity range from 30% RH to 95% RH ± 3% RH.
For visualization of test objects under U.V. tube having long wavelength (365 n.m.) and short wavelength (254 n.m.) as desired. A flourescent tube is fitted to the unit for day light visualization. Supplied with three tubes to work on 220/230 Volts A.C.
Double walled with inside made of Heavy S.S. and outside of M.S. sheet duly powder coated. The gap etween the two walls is fitted with high grade glass wool to minimize thermal loss. Temperature range from ambient to 250°C ± 2°C, is controlled by hydraulic capillary type thermostat. A variable speed strirring arrangement is fitted to the unit for maintaining temperature Plug to work on 220/230 volts A.C. supply.
These units consist of main boiler. A built in heater enclosed in Quatrz glass tube. Housing auto Water level adjuster, Bottom outlet for cleaning waste discharge which is fitted with Teflon screw Cap valve. A coil condenser fitted on top for condensing vapours. The whole unit is mounted on epoxy coated metal box stand & covered with acrylic sheet cover for protection. Power supply unit is in built no extra attachment is required. Housing sturdy & reliable power System requires 1 K.W. Power per heater.
Deluxe Model
The equipment has a very casted top with room for heating 40 digestion tubes of 75 ml. Each. Heating elements are speared uniformally so that the entire casted top, and thus the tubes, attain the same temperature throughout. Temperature is controlled by microprocessor PID Controller. The gap between the elements and outer M.S. painted wall is fitted with high grade mineral wool to avoid thermal loss. To work on 220/230volts A.C. Supply 40 tubes dia 24 mm.
Most useful for sterilizing the loaded material under a steam pressure of 5 to 20 p.s.i. (adjustable with pressure control switch). It has inner chamber, steam jacket and outer wall made of S.S. duly argon are welded. The space between outer wall and steam jacket is filled with high grade glass wool to minimize the temperature loss. All sterilizers are hydraulically tested upto 40p.s.i. The lid is made of thick Stainless Steel and closed by wing radial type closing arrangement. Fitted with a gasket made up of silicon, safety valve, water level indicator, steam release valve, pressure gauge, and Automatic Pressure Control Switch, Microprocessor PID Temperature+ Timer and S.S. basket. Supplied complete with cord and plug to work on 220 / 230 volts A.C. supply. Fitted with vacuum breaker as a safety device.
Double walled, mounted on sturdy angle iron frame. Outer body made up of Mild Steel powder coated painted/Stainless Steel-304 and Inner body made up of Stainless Steel-304. Insulation between inner and outer wall is done with 75mm thick glass wool to prevent any heat loss. Provided with double walled door with a system to prevent its opening. Door is provided with best quality handle, gasket etc. Provided with brackets to support the heavily laden trays at different heights. Temp. Range is from ambient to 150°C with an accuracy of + 3°C or as desired by you and is controlled byMicroprocessor PID controller with PT-100 sensor. Heating is done with ISI mark heating elements made from Ni-chrome heating wire placed in the sides of the chamber. Motor blower system in the side of the chamber to maintain the uniformity of the temp. Throughout the chamber. Works on 220Vand 50HZ single phase A.C. provided with exhaust shaft on the top of the body.
SEED GERMINATOR (SINGLE CHAMBER) 'U-TECH' MAKE:
Most suitable for conducting various experiments on a variety of seeds under different conditions of temperature and humidity. Atmospheric conditions are created within the chamber to perform different experiments without gone onto the field. The double walled unit has inner chamber made up of S.S. and outer chamber of M.S. Sheet duly powder coated. Temperature from 5°c to 50°c ± 1°c is controlled by Microprocessor PID controller. Humidity (NOT ADJUSTABLE) is created in a S.S. Water reservoir fitted at the bottom to provide 90% to 95% ± 3% RH Humidity. Supplied complete with 12 adjustable perforated trays. Complete with cord and plug to work on 220/230 V. A.C. Supply.
Lyophilyser Covers a range of application from multiuser centralized laboratory application, piolet plant determination works etc. This unit is mounted on castors. The unit has hermetically sealed compressor maintains temperature up to -40°C & -80°C fitted with MICRO PROCESSOR PID CONTROLLER. Trap is given at non magnetic stainless steel dished bottom for complete effluent removal. Refrigerant Coils made of Copper are heavily insulated for maximum efficiency in the condensing chamber.
Used for storing cadaverous under low temperature cool conditions in order to prevent decomposition. These units are double walled with outer made of M.S. Sheet duly painted and inner walls of S.S-304. Trays made of G.I. Sheet to carry dead bodies are provided with handles so as to carry dead bodies. Trays travel on rollers fitted with ball bearings for easy movement. Hermetically sealed compressor serves refrigeration unit, to maintain temperature range of -2° C to 5° C or -15° C to -20° C (as ordered) Unit is fitted with Microprocessor PID Controller. To work on 220/230 volts A.C. Supply.
Mr. Sanjay Rai (Star Scientific Instruments)
208, Vardhman Premium Mall, Deepali Pitam Pura, Delhi -110034,India, Pitampura
Share us via
View Contact Number 
