Verified
Write a Review
Our Products
Our product range contains a wide range of Sub-Surface Engraver
Spot Laser Welding Machinehas high peak power penetration capability which results in smooth welding effect with less heat affected zone. Laser welding is very much suitable for very thin metals as well as hard metals Different styles of welding application is possible with laser welding.
This type of laser welding is commonly used in Jewellery, Dental implants, auto industries, transducers, Electronic compo-nents, mobile industries, hardware. Tools, Utensils etc.
Motorized Z axis for easy focusing of objects
Industrial Fiber Laser Marker has the capability to hold both precise as well as Heavy load object for marking
| MODEL | F 10/20/30 | FS 10/20/30 | FD 20/30 |
| Wavelength | 1060-1070 | 1060-1070 | 1060-1070 |
| Average Power | 10W/20W/30W | 10W/20W/30W | 10W/20W/30W |
| Beam Quality | ≤ 2 M2 | ≤ 2 M2 | ≤ 2 M2 |
| Laser Energy | 0.4 /0.8 ~ 1 mj | 0.33 /0.5 ~ 0.6 mj | 0.4 /0.8 ~ 1 mj |
| Repetition Rate | 20 - 80 Khz | 1-500 khZ | 20 - 80 Khz |
| Marking Area | 100 x 100 mm | 100 x 100 mm | 100 x 100 mm |
| 150 x 150 mm | 150 x 150 mm | 150 x 150 mm | |
| others | others | 3D Marking | |
| Marking Speed | ≤ 12000 mm/s | ≤ 12000 mm/s | ≤ 12000 mm/s |
| Min. Char. Size | 0.2 mm | 0.2 mm | 0.2 mm |
| Min Line. Width | 50 µm | 50 µm | 50 µm |
| Cooling System | Air | Air | Air |
| Power Consumption | ≤ 600W | ≤ 600W | ≤ 600W |
| Power Requirement | 220 VAC / 50Hz / 16A | 220 VAC / 50Hz / 16A | 220 VAC / 50Hz / 16A |
| Dimensions | 1390 x 300 x 350 mm | 1390 x 300 x 350 mm | 1390 x 300 x 350 mm |
| Weight | 110 Kgs | 110 Kgs | 110 Kgs |
Write up: Fiber Laser Marking Machine is a rugged and compact pulsed fiber laser intended for integration into industrial equipment. This Laser delivers 20W average power via a flexible Output fiber and collimating Optics. It is a Air cooled machine so doesn't requires any water cooling system as in traditional Diode and Lamp pump machine so machine is very compact. since the laser is delivered via Fiber Optics the ambient losses is reduced resulting in a very efficient Laser Beam with Higher Peak Power. Applications: Marking on Reflective Material like Gold, Copper & Silver with higest Precision, Widely Used in Jewellery Hallmarking, Solar Cell Scribing, Plastic marking, high speed layer removal etc.Models:1: Fiber Compact (FC Series) An Ultra Compact Model Specially Designed for Precise Marking on Metals (Hallmarking)
Co2 Laser marker adopts imported high quality RF tube , RF Tube ( Metal Tube) has long life , High Stability, Good Beaam quality, also high performace, RF tube is very much suitable for industrial application where long time operating stability is required. Co2 Laser can mark and engrave non metal products like leather, acrylic, glass, wooden surface, ceramics, buttons, fabrics and clothings, crystal etc. Co2 is popular in Pharmaceutical, food and beverages, textile , Cosmetics, electronics, crafts gifts etc.
| Model | C30 / 60/ 80 | CA30 / 60 | CS30 / 60/ 80 |
| Laser | CO2 | CO2 | CO2 |
| Wavelength | 10.6 µm | 10.6 µm | 10.6 µm |
| Average Output | 30W / 60 W/80W | 30 W / 60 | 30 W / 60 W / 80 W |
| Marking Area | 100 x 100 mm / 150 x 150 mm | 100 x 100 mm / 150 x 150 mm | 200 x 200 mm /400 x 400 mm |
| Marking Speed | ≤ 7000 mm/s | ≤ 7000 mm/s | ≤ 7000 mm/s |
| Min. Line Width | 0.12 mm | 0.12 mm | 0.12 mm |
| Min. Char. Width | 0.4 / 0.5 / 0.6 mm | 0.4 / 0.5 mm | 0.4 / 0.5 / 0.6 mm |
| Cooling method | Water | Air | Air / Water |
| Power Consumption | 22v V / 15A | 22v V / 15A | 22v V / 15A |
| Electrical Requirement | 22v V / 20A | 22v V / 20A | 22v V / 20A |
| Dimensions | 1400 x 300 x 350 mm | 1400 x 300 x 350 mm | 1400 x 300 x 350 mm |
| Weight | 140 kgs | 140 Kgs | 140 Kgs |
Green Surface and Sub Surface Engraving machines are suitable for marking on Glass, Crystal etc Any 2D / 3D images can be execute through computer Properly Distributed fine hoigh resolution process makes images very smooth and Clear Surface and Sub surface engravers are basically for Craft works, Photography and best suitable collections of long lasting images
| Model | SSG 3 | G3 |
| Laser | DP | DP |
| Wavelength | 532nm | 532nm |
| Average Power | 3W | 3W |
| Max Pulse Energy | 2.4 mj | 2.4 mj |
| Max Engraving Speed | 5000 p/s | 5000 p/s |
| Spot Size | 50 µm - 150 µm | 50 µm - 150 µm |
| Max Dimension of Object | 150 x 150 x 120 mm | 750 x 450 x 30 mm |
| Max Dimesion of Image | 80 x 80 x 80 mm | 700 x 400 x 30 mm |
| Cooling System | Water / AIR | Water |
| Power Consumption | ≤ 700W / 1.5KW | ≤ 1.5 KW |
| Power Requirement | 220 VAC/50 HZ/ 10A—15A | 220 VAC/50 HZ/ 15A |
| Dimensions | 500 x 650x 750 mm | 1400 x 700 x 1400 mm |
| Weight | 65 kgs | 100 kgs |
UV Laser marker is equipped with a 355 nm UV laser that is the end off three times the frequency of diode end pump Laser.
It has high conversion rate between laser and electricity.
UV laser has super precision marking capability with low heat affected zoneUV Laser is widely using in Drilling of tiny holes, Flexible PCB, LCD, TFT marking and slicing. Silicon wafer slicing etc.
Creating exquisite and lively engraved icons is made easy with the Super Jet Sub-Surface Engraver. The Super Jet is equipped with a flying light path structure.It is used for large crystal and glass sub-engraving. Once processed, the crystal or glass becomes a valuable artistic collectable. At present, the Super Jet is the only domestic machine available that can engrave crystal or glass of the size that it can. The engraving software can export special plane rilievo effect
Mr. Pradeep Kumar Nair (Star Laser Technology)
Off No1 &2, Ground Floor, Vaishali Building, Sant Ramdas Road, Mulund East, Mumbai, Maharashtra - 400081
https://www.starlasertechnology.co.in
Share us via
View Contact Number 
