Our Products
Tractors
2 Products availableLeading Manufacturer, Supplier & Retailer of Hydraulic Mobile Crane (20000), Hydraulic Mobile Crane (15000), Hydraulic Mobile Crane (11000), Hydraulic Mobile Crane (13000) and Hydraulic Mobile Crane (9000).
Technical Specification
Lifting Capacity | 20 Tonnes |
---|---|
Engine | SE-470 Standard, 4 Cylinder, direct injection, water cooled diesel engine. |
Air Cleaner | Dry Type |
Rated Power | 70 HP @ 2200 RPM |
Transmission | Collar Shirt, Helical teeth with 8 forward 8 reverse speeds & hi-low ranger selector |
Clutch | Single plate, heavy duty & dry friction with diaphagram type pressure plate |
Brake | Pneumatically assisted hydraulic brakes front & rear brakes are actuated through a single pedal |
Max Speed | 28 KMPH |
Hydraulic System | Intra vane type main pump Eight spool control valve Two double acting lift cylinder Two double acting steering cylinders One/three double acting boom extension cylinder |
Steering Rear | Steering Wheel operated with Armitol mounted at rear. |
Steering Front | Hydraulically operated with 55o articulation on either side and turning radius of 7.25 m (approx.) on outer rear wheels |
Electrical System | 12 V, negative earth, single battery |
Telescopic Boom | Two/four part heavy duty boom with hydraulic operated one/three extension. |
Derricking | Through two doble acting lift jacks with rod dia 100 mm |
Max. Boom Height | 34'/57' with single / triple extension |
Main Frame | Extra heavy in single radius |
Chassis | Heavy with extra Re-inforced |
Telescopic Time | 45 Second |
Boom Range Lifting Time | 0o To 65o 23 Second |
Hoist | Winch rope dia 13 mm driven by hydraulic motor with 4 falls |
Hoist Speed | 24 Mtrs./Min. (Line Speed) |
Tyres Front Rear | 12.00 x 20 - 16 PR (Std.) (Four Nos.) 16.9 x 28 - 12 PR (Std.) (Two Nos.) |
Fluid Capacity Engine Fuel Tank Hyd. Tank Transmission | (in Litres) 13.5 45 160 47 |
Standard Equipment | All Weather Cabin Lift Cylinder Guard Turn & Reverse Lamp Front Bumper Reflector Rear View Mirror |
Safety | Audio overloaded indication Hose Failure Protection Audio over hoisting indicators Safety brakes on hoist cylinder |
Unladen Weight | 13145 Kg. (Approximately) |
Track Rear Front | 1830 mm (center of twin wheels) 2230 mm (center of wheels) |
Technical Specification
Lifting Capacity | 15 Tonnes |
---|---|
Engine | SE-460 Standard, 4 Cylinder, direct injection, water cooled diesel engine. |
Air Cleaner | Dry Type |
Rated Power | 60 HP @ 2200 RPM |
Transmission | Sliding Mesh, Helical teeth with 10 forward, 2 reverse speeds & hi-low range selector |
Clutch | Single plate, heavy duty & dry friction with spring loaded pressure plate |
Brake | Pneumatically assisted hydraulic brakes front & rear brakes are actuated through a single pedal |
Max Speed | 28 KMPH |
Hydraulic System | Intra vane type main pump Four spool control valve Two double acting lift cylinder Two double acting steering cylinders One/two double acting extension cylinder |
Steering | Hydraulically operated with 55o articulation on either side and turning radius of 7.0 m (approx.) on outer rear wheels |
Electrical System | 12 V, negative earth, single battery |
Telescopic Boom | Three part heavy duty boom with hydraulic operated double extension. |
Derricking | Through two doble acting lift jacks with rod dia 80 mm |
Max. Boom Height | 49' with double extension |
Main Frame | Extra heavy in single radius |
Chassis | Heavy with extra Re-inforced |
Telescopic Time | 19 Second |
Boom Range Lifting Time | 0o To 60o 21 Second |
Hoist | Winch rope dia 13 mm driven by hydraulic motor with 4 falls |
Hoist Speed | 24 Mtrs./Min. (Line Speed) |
Tyres Front Rear | 10.00 x 20 - 16 PR (Std.) (Four Nos.) 11.00 x 20 - 16 PR (Opt.) (Four Nos.) 13.00 x 24 - 18 PR (Std.) (Two Nos.) 14.00 x 25 - 20 PR (Opt.) (Two Nos.) |
Fluid Capacity Engine Fuel Tank Hyd. Tank Transmission | (in Litres) 12 ½ 45 110 47 |
Standard Equipment | All Weather Cabin Lift Cylinder Guard Turn & Reverse Lamp Front Bumper Reflector Rear View Mirror |
Safety | Audio overloaded indication Hose Failure Protection Safety valve on Lift Cylinder Hoom Pin Failure Protection Tie Bolt Pin Failure Protection |
Unladen Weight | 11726 Kg. (Approximately) |
Track Front Rear | 2130 mm (center of twin wheels) 1730 mm (center of wheels) |
Technical Specification
Lifting Capacity | 11 Tonnes |
---|---|
Engine | SE-450 Standard, 4 Cylinder, direct injection, water cooled diesel engine |
Air Cleaner | Dry Type |
Rated Power | 50 HP @ 2200 RPM |
Transmission | Sliding Mesh, Helical teeth with 10 forward, 2 reverse speeds & hi-low range selector |
Clutch | Single plate, Heavy Duty & Dry friction with spring loaded pressure plate |
Brake | Pneumatically assisted hydraulic brakes Front & rear brakes are actuated through a single pedal |
Max Speed | 28 KMPH |
Hydraulic System | Intra vane type main pump Four spool control valve Two double acting lift cylinder Two double acting steering cylinders One/Two double acting extension cylinder |
Steering | Hydraulically operated with 55o articulation on either side and turning radius of 7.0 m (approx.) on outer tear wheels |
Electrical System | 12 V, Negative earth, Single Battery |
Telescoping Boom | Two/three part heavy duty boom with hydraulic operated single/double extension. |
Derricking | Through two double acting lift jacks with rod Dia 70 mm |
Max. Boom Height | 34'/40' with Single/double extension |
Main Frame | Extra heavy in single radius |
Chassis | Heavy with extra Re-inforced |
Telescoping Time | 8 Second |
Boom Range Lifting Time | 00 To 600 20 Second |
Hoist | Winch rope dia 13 mm driven by hydraulic motor with 4 falls |
Hoist Speed | 24Mtrs./Min. (Line Speed) |
Tyres Front Rear | 10.00 x 20 - 16 PR (Std.) / Four Nos. 13.00 x 24 - 18 PR (Std.) / Two Nos. |
Fluid Capacity Engine Fuel Tank Hyd. Tank Transmission | (in litres) 12 ½ 45 110 47 |
Standard Equipment | All Weather Cabin Lift Cylinder Guard Turn & Reverse Lamp Front Bumper Reflector Rear View Mirror |
Safety | Audio overloaded Indication Hose Failure Protection Safety valve on Lift Cylinder Boom Pin Failure Protection Tie Bolt Pin Failure Protection |
Unladen Weight | 10445 Kg. (Approximately) |
Track Front Rear | 2130 mm (center of twin wheels) 1730 mm (center of wheels) |
Technical Specification
Lifting Capacity | 13 Tonnes |
---|---|
Engine | SE-460 Standard, 4 Cylinder, direct injection, water cooled diesel engine. |
Air Cleaner | Dry Type |
Rated Power | 60 HP @ 2200 RPM |
Transmission | Sliding Mesh, Helical teeth with 10 forward, 2 reverse speeds & hi-low range selector |
Clutch | Single plate, heavy duty & dry friction with spring loaded pressure plate |
Brake | Pneumatically assisted hydraulic brakes front & rear brakes are actuated through a single pedal |
Max Speed | 28 KMPH |
Hydraulic System | Intra vane type main pump Four spool control valve Two double acting lift cylinder Two double acting steering cylinders One/two double acting extension cylinder |
Steering | Hydraulically operated with 55o articulation on either side and turning radius of 7.0 m (approx.) on outer rear wheels |
Electrical System | 12 V, negative earth, single battery |
Telescopic Boom | Two/Three part heavy duty boom with hydraulic operated single/double extension. |
Derricking | Through two doble acting lift jacks with rod dia 70 mm |
Max. Boom Height | 42' with single/double extension |
Main Frame | Extra heavy in single radius |
Chassis | Heavy with extra Re-inforced |
Telescopic Time | 19 Second |
Boom Range Lifting Time | 0o To 60o 21 Second |
Hoist | Winch rope dia 13 mm driven by hydraulic motor with 4 falls |
Hoist Speed | 24 Mtrs./Min. (Line Speed) |
Tyres Front Rear | 10.00 x 20 - 16 PR (Std.) (Four Nos.) 11.00 x 20 - 16 PR (Opt.) (Four Nos.) 13.00 x 24 - 18 PR (Std.) (Two Nos.) 14.00 x 25 - 20 PR (Opt.) (Two Nos.) |
Fluid Capacity Engine Fuel Tank Hyd. Tank Transmission | (in Litres) 12 ½ 45 110 47 |
Standard Equipment | All Weather Cabin Lift Cylinder Guard Turn & Reverse Lamp Front Bumper Reflector Rear View Mirror |
Safety | Audio overloaded indication Hose Failure Protection Safety valve on Lift Cylinder Hoom Pin Failure Protection Tie Bolt Pin Failure Protection |
Unladen Weight | 11260 Kg. (Approximately) |
Track Front Rear | 2130 mm (center of twin wheels) 1730 mm (center of wheels) |
Technical Specification
Lifting Capacity (Free on Wheel) | 9 Tonnes |
---|---|
Engine | SE-450 Standard, 4 Cylinder, direct injection, Water Cooled Diesel Engine. |
Air Cleaner | Dry Tape |
Rated Power | 50 HP @ 2200 RPM |
Transmission | Sliding Mesh, Spur teeth with 10 forward, 2 reverse speeds & hi-low range selector |
Clutch | Single plate, Heavy Duty & Dry friction with spring loaded pressure plate |
Brake | Pneumatically assisted hydraulic brakes front & rear brakes are actuated through a single pedal |
Max Speed | 28 KMPH |
Hydraulic System | Intra vane type main pump Four spool control valve Two double acting lift cylinder Two double acting steering cylinders and one double acting extension cylinder |
Steering | Hydraulically operated with 55o articulation on either side and turning radius of 5.5 m (approx.) on outer rear wheels |
Electrical System | 12 V, Negative earth, single battery |
Telescoping Boom | Two part heavy duty boom with hydraulic operated single extension of 1800 mm stroke. |
Derricking | Through two double acting jacks with rod Dia 63 mm |
Max. Boom Height | 27' with single extension |
Main Frame | Extra heavy in single radius |
Chassis | Heavy with extra Re-inforced |
Telescoping Time | 8 Second |
Boom Lifting Time | 0o To 60o 20 Second |
Hoist | Winch rope dia 13 mm driven by hydraulic motor with 4 falls |
Hoist Speed | 24 Mtrs. / Min. (Line Speed) |
Tyres Front Rear | 10.00 x 20 - 16 PR (Std.) / 11.00 x 20 - 16 PR (Opt.) (Four Nos.) 13.00 x 24 - 18PR (Std.) /14.00 x 25 - 20 PR (Opt.) (Two Nos.) |
Fluid Capacity Engine Fuel Tank Hyd. Tank Transmission | (in litres) 12 ½ 45 110 47 |
Standard Equipment | All Weather Cabin Lift Cylinder Guard Turn & Reverse Lamp Front Bumper Reflector Rear View Mirror |
Safety | Audio overloaded indication House Failure Protection Safety valve on Lift Cylinder Boom Pin Failure Protection Tie Bolt Pin Failure Protection |
Unladen Weight | 8460 Kg. (Approximately) |