Our Products
Downhole Equipment
2 Products availableWater Treatment & Purification Plant
1 Products availableNoodles
1 Products availableBicycles
1 Products availableInverters, UPS & Converters
1 Products availableShoes
1 Products availableLaces, Interlinings & Other Accessories
1 Products availableDental Equipment
1 Products availableOur Complete range of products are Heavy Duty Straight Spiralizer, Aluminum Rigid Centralizer, Low drag Roller Centralizer, Differential Valve and Welded Bow Spring Turbolizer.
Stammford's Slip on Welded Single Piece Bow Spring Sledge Chakra is made one piece welded at one side. Premium quality Bows have high restoring force uniform hardness all over. Slip on centralizers are provided for direct installation pipe by slipping on. It has High tensile strength, high shock absorption value and impact value.
In welded centralizers, welding can never be as smooth as the single piece centralizer. Welding always be little overlapped or little exposed which cause friction to fluid while running in the hole but single piece centralizer have smooth corner radius which allow better fluid by pass and have low friction.
This centralizer undergoes a special Iron Phosphate coating process to prevent it from rust and coated with special Polyester Powder. It is shipped in assembled condition only. These are available in all sizes ranging from 4" to 20". Any special sizes or combination can available on request.
Stammford's Non Welded Turbolizer have all the characteristic of regular Centralizer as far as Starting Force is concerned. The main difference is that Turbolizer Centralizer has deflector blades fitted on Standard Bow Springs. These blades or Fins are specially made of Heat Treated spring steel. Processed under rigid condition as per API 100 specifications.
It is equipped with Right and Left hand combination. These bows are fitted on uniquely designed self locking End Collar. Another special characteristics are built in Stop device on leading End Collar. The metal fins are installed on the Bows, to help induce turbulence in the cement slurry during pumping operation. Spring action of blades makes them flexible, which minimize damage while moving downhole. This device improves the cleaning action of Drilling Fluids; distribute the cement slurry into Well bore irregularities and minimizes channeling.
These Centralizers undergo a special Iron Phosphate coating process to prevent from Rust then coated with special Polyester Powder. These can be shipped in half assembled condition for economy in shipping and storage costs. These are available in 4 "to 20 "sizes. Any special sizes or combination can available on request
Stammford's Hinged Welded Bow Spring Turbolizer induces a spiral flow pattern in the slurry thereby increasing displacement efficiency. It has deflector blades fitted on Standard Bow Springs. These blades or Fins are specially made of Heat Treated spring steel. Processed under rigid condition as per API 10D specifications.
It is equipped with Right and Left hand combination. Welded Turbolizer is ideal for deviated and horizontal well. Bow Springs are strongly welded to the End Collar under required temperature and condition with extra low Hydrogen coated Electrodes, which assured ultimate strength and uniformity in every weld. Integral hinge folded on the inside stay intact even under extreme stress. The End Collars are designed with a reinforcing Rib stamped into the End Collar to give maximum structural toughness Another special characteristics are built in Stop device on leading End Collar. The metal fins are installed on the bows, to help induce turbulence in the cement slurry during pumping operation. Spring action of blades makes them flexible, which minimize damage while moving downhole.
This device improves the cleaning action of drilling fluids, distribute the cement slurry into well bore irregularities and minimize channeling. These Centralizers undergo a special Iron Phosphate coating process to prevent from Rust then coated with special Polyester Powder These can be shipped in half assembled condition for economy in shipping and storage costs. These are available in 3 1/2 " to 20 " sizes. Any special sizes or combination can available on request.
Stammfords Non welded positive Centralizers are uniquely designed with flat bottom U profile of different depths. The Centralizers significantly reduce frictional drag while being used in deviated holes. They provide almost 100% Stand Off when run inside a cased hole. They are supplied 1/4" or 6 mm less than the inside diameter of the hole size in which Centralizer is to be run.
This design eliminates weak (brittle) spots passage. U profile bow design permits maximum fluid passage. End Collars are designed with self-locking action, which are easy to assemble, time saver and have strong grip. The Ten special U sizes Bows can be configured to any hole dia. These Bows with extended profile prevent them from hitting against casing collars. Bows are of high quality steel for consistent characteristics. They are available in all sizes ranging from 4 1/2" to 20".
These centralizers undergo a special Iron Phosphate coating process to prevent from Rust then coated with special Polyester Powder.
These can be shipped in half assembled condition for economy in shipping and storage costs. Any special sizes or combination can available on request.
Stammford's Slip On Solid Heavy Duty Welded Positive Spirolizer are specially designed for extra heavy load in highly deviated Horizontal well and for use with Liner Hangers. The heavy steel construction is highly effective as compare to other alloy. Wide symmetrical Spiral fins are welded to the one piece rolled formed Sleeve under required temperature and condition with extra low Hydrogen coated Electrodes, which assures ultimate strength and uniformity in every weld.
Steel construction provides superior toughness over other materials. Vanes can be selected to meet any hole dia from a choice of seven boat profile depths. Slip On Spirolizer are provided for direct installation on the pipe by slipping on and can be provided with compatible Stop Collars beveled from one side positioned by set screw. Hydrodynamic shapes of spiral fins allow optimal mud displacement and minimal pressure drop across centralizer. Induced vortex flows enable superior mud removal. They have high wear resistance and resist high side load. Slip On Solid Spirolizer are provided for direct installation on the pipe by slipping on and can be provided with compatible Stop Collars beveled from one side positioned by set screw. They are shipped in assembled condition only.
These centralizers undergo a special Iron Phosphate coating process to prevent from Rust then coated with special Polyester Powder they are available in all sizes ranging from 3 1/2" to 20". Any special sizes or combination can available on request.
Cementing Plug are manufactured using graded rubber that is fused onto a composite or aluminum core. The top plug can be used when a dual plug system is not required and the bottom cementing plug can be used when a dual plug system is required. All plugs are completely PDC drillable, and the operating range of temperature possible with an Aluminum core is up to 200 degrees Fahrenheit.
This product can also be ordered for use in higher operating temperatures and use with either synthetic or mud fluids. It is available in 31/2 to 30 sizes. Any special sizes can be made upon request.