Our Products
Copper Components
2 Products availableRound Bars
2 Products availableFlanges
2 Products availableSteel Sheets
1 Products availableMetal Sheets
1 Products availableSteel Bars
1 Products availableSteel Plates, Sheets, Bars & Rods
1 Products availablePerforated Sheet
1 Products availableWe offer a complete product range of Incoloy Pipe and Stainless Steel
Stainless Steel Impex is acknowledged as a manufacturer, exporter & suppliers of Slip On Flange & Stainless steel Flanges (Gr. 304, 304L, 316, 316L) available in a variety or grades, materials, and finishes, in metric and inch sizes. These Slip On Flange are manufacture in different Material of Flanges like SORF Flanges, Carbon Steel Slip On Flanges, Stainless Steel Slip On Flanges, Alloy Steel Slip On Flanges, Duplex Steel Slip On Flanges, Inconel Slip On Flanges, Monel Slip On Flanges, Hastelloy Slip On Flanges, Copper Nickel Slip On Flanges in India & Asia, conform to Slip On specifications.The flange is slipped over the pipe and then welded both inside and outside to provide sufficient Strength and prevent leakage. This flange is used in preference to weld necks by many users because of its lower cost and the fact that less accuracy is required when cutting pipe to length.
SLIP-ON FLANGE, SO FORGED FLANGES PRODUCTION RANGE
Size:1/2 (15 NB) to 48 (1200NB)
Standards:ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings:Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, ClassOrifice Flanges are used with orifice meters for the purpose of measuring the flow rate of either liquids or gases in the respective pipeline. Pairs of pressure "Tappings", mostly on 2 sides, directly opposite each other, are machined into the orifice flange. This makes separate orifice carriers or tappings in the pipe wall unnecessary.
Orifice Flanges generally come with either Raised Faces or RTJ (Ring Type Joint) facings. They are, for all intensive purposes, the same as weld neck and slip on flanges with extra machining.
The image on the right shows a set Orifice Flanges, where a Orifice Plate is mounted and a jack screw is machined. This jack screw is used to facilitate separating the flanges for inspection or replacement of the Orifice Plate and gaskets.
The range of orifice flanges covers all standard sizes and ranges, and all common flange materials. Flanges are available in Welding Neck, Slip On, and Threaded form, and are typically supplied with two 1/2" NPT tappings in each flange.
ASME B16.36 covers Dimensions and dimensional tolerances from orifice flanges (similar to those covered in ASME B16.5) that have orifice pressure differential connections. Coverage is limited to the following flanges:
Welding Neck Classes 300, 400, 600, 900, 1500, 2500
Slip On Class 300
Threaded Class 300
Stainless Steel Impex is acknowledged as a manufacturer, exporter & suppliers of Slip On Flange & Stainless steel Flanges (Gr. 304, 304L, 316, 316L) available in a variety or grades, materials, and finishes, in metric and inch sizes. These Slip On Flange are manufacture in different Material of Flanges like SORF Flanges, Carbon Steel Slip On Flanges, Stainless Steel Slip On Flanges, Alloy Steel Slip On Flanges, Duplex Steel Slip On Flanges, Inconel Slip On Flanges, Monel Slip On Flanges, Hastelloy Slip On Flanges, Copper Nickel Slip On Flanges in India & Asia, conform to Slip On specifications.The flange is slipped over the pipe and then welded both inside and outside to provide sufficient Strength and prevent leakage. This flange is used in preference to weld necks by many users because of its lower cost and the fact that less accuracy is required when cutting pipe to length.
SLIP-ON FLANGE, SO FORGED FLANGES PRODUCTION RANGE
Size:1/2 (15 NB) to 48 (1200NB)
Standards:ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Pressure Ratings:Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 PN6, PN10, PN16, PN25, PN40, PN64 etc.
Carbon Steel Slip-on Flanges:ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, LF3 CL1/CL2, A694 F42, F46, F48, F50, F52, F56, F60, F65, F70, A516.60, 65, 70 (Spectacle Blind Flange, Spacer Ring/Spade Flange), Steel RST37.2, C22.8
Stainless Steel Slip-on Flanges:ASTM A182 F202, F304/304L/304H, F316/316L, F316H, F316TI, F310, F321, F904L
Alloy Steel Slip-on Flanges:ASTM A182 F1, F5, F9, F11, F22, F91
Special Alloy Slip-on Flanges:Duplex, Super Duplex, Nickel Alloys
Flange Face Type:Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Coating/Surface Treatment:Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Value Added Services:CNC Machining, Customised Flanges
Sizes for Slip On Flanges
All Slip On Flanges are available available in sizes from 1/4 through to any size.
Wall Thickness for Slip On Flanges
Schedule 5s through to Schedule XXS and heavier.
Dimensions
Diameter :1/2 to 24
Pressure class :150#, 300#, 600#, 1500#
Dimensions and Pressure Ratings for Slip On Flanges:
ANSI, MSS- SP-44, BS3293, API 605 150lb through to 2500lb
Flange Facings: Raised Face, Ring Type Joint, Large Tongue & Groove, Small Tongue & Groove
BS4504, PN6, 10, 16, 25, 64
BS10, Table D, E, F, & H
DIN Standards
Drilling | |||||||||
---|---|---|---|---|---|---|---|---|---|
Nominal Bore | Dia.(D) | Thick.(E) | Dia.(F) | Dia.(B) | Dia.(A) | Height1(H) | Nbr | Holes | Dia.(C) |
1/2″ | 90 | 9.6 | 35.05 | 30 | 22.2 | 14 | 4 | 15.87 | 60.3 |
3/4″ | 100 | 11.2 | 42.93 | 38 | 27.7 | 14 | 4 | 15.87 | 69.9 |
1″ | 110 | 12.7 | 50.80 | 49 | 34.5 | 16 | 4 | 15.87 | 79.4 |
1 1/4″ | 115 | 14.3 | 63.50 | 59 | 43.2 | 19 | 4 | 15.87 | 88.9 |
1 1/2″ | 125 | 15.9 | 73.15 | 65 | 49.5 | 21 | 4 | 15.87 | 98.4 |
2″ | 150 | 17.5 | 91.95 | 78 | 61.9 | 24 | 4 | 19.05 | 120.7 |
2 1/2″ | 180 | 20.7 | 104.65 | 90 | 74.6 | 27 | 4 | 19.05 | 139.7 |
3″ | 190 | 22.3 | 127.00 | 108 | 90.7 | 29 | 4 | 19.05 | 152.4 |
3 1/2″ | 215 | 22.3 | 139.70 | 122 | 103.4 | 30 | 8 | 19.05 | 177.8 |
4″ | 230 | 22.3 | 157.22 | 135 | 116.1 | 32 | 8 | 19.05 | 190.5 |
5″ | 255 | 22.3 | 185.67 | 164 | 143.8 | 35 | 8 | 22.22 | 215.9 |
6″ | 280 | 23.9 | 215.90 | 192 | 170.7 | 38 | 8 | 22.22 | 241.3 |
8″ | 345 | 27.0 | 269.75 | 246 | 221.5 | 43 | 8 | 22.22 | 298.5 |
10″ | 405 | 28.6 | 323.85 | 305 | 276.2 | 48 | 12 | 25.40 | 362.0 |
12″ | 485 | 30.2 | 381.00 | 365 | 327.0 | 54 | 12 | 25.40 | 431.8 |
14″ | 535 | 33.4 | 412.75 | 400 | 359.2 | 56 | 12 | 28.57 | 476.3 |
16″ | 595 | 35.0 | 469.90 | 457 | 410.5 | 62 | 16 | 28.57 | 539.8 |
18″ | 635 | 38.1 | 533.40 | 505 | 461.8 | 67 | 16 | 31.75 | 577.9 |
20″ | 700 | 41.3 | 584.20 | 559 | 513.1 | 71 | 20 | 31.75 | 635.0 |
24″ | 815 | 46.1 | 692.15 | 663 | 616.0 | 81 | 20 | 34.92 | 74 |
We supply a wide range of precisely engineered stainless steel pipes & tubes, made in compliance with international quality and safety standards. Our range comprises of stainless steel welded pipes & tubes. Available in different dimensions & grades, these stainless steel welded tubes and pipes are widely used in different industries like power, engineering, construction and many more. We offer products at highly competitive prices and deliver consignment within stipulated time .
Range :15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS
Form :Seamless / Erw / Welded in Round & Square .
Carbon Steel :ASTM / ASME A 53 GR. A , B
ASTM / ASME 106 GR. A , B , C .
API 5L GR. B , API 5L X 42 , X 46 , X 52 , X 60 , X 70.
ASTM / ASME A 691 GRA , B , C
Alloy Steel:
ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91
ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
Range :15 NB UP TO 1200 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS
Form :Seamless / Erw / Welded in Round & Square.
Nickel Alloy :ASTM / ASME SB 163 UNS 2200 ( NICKEL 200 )
ASTM / ASME SB 163 UNS 2201 (NICKEL 201 )
ASTM / ASME SB 163 / 165 UNS 4400 (MONEL 400 )
ASTM / ASME SB 464 UNS 8020 ( ALLOY 20 / 20 CB 3 )
ASTM / ASME SB 704/705 UNS 8825 INCONEL (825)
ASTM / ASME SB 167 / 517 UNS 6600 (INCONEL 600 )
ASTM / ASME SB 167 UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 704 /705 UNS 6625 (INCONEL 625)
ASTM / ASME SB 619/622/626 UNS 10276 ( HASTELLOY C 276 )
Copper Alloy :ASTM / ASME SB 111 UNS NO. C 10100 , 10200 , 10300 , 10800 , 12000, 12200, 70600 , 71500 . ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30)
Grades :Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000
Type:Seamless / Erw / Welded/ Fabricated
Standard :Hastelloy Seamless Pipe
Hastelloy ERW Pipe
This range is used in :
Petrochemicals Plants
Oil Refineries
Fertilizers Plants
Sugar Mills
Chemical Plants
Pharmaceuticals
Textile Machinery
Grades :Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Type:Seamless / Erw / Welded/ Fabricated
Range:15 NB up to 600 NB in SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 & XXS
Form:Round, Square, Rectangular, Hydraulic etc.
Length:Single Random, Double Random & Cut Length
End:Plain End, Beveled End, Threaded
This range is used in :
Petrochemicals Plants
Oil Refineries
Fertilizers Plants
Sugar Mills
Chemical Plants
Pharmaceuticals
Textile Machinery
The salient features are as follows :
Hot Dipped Galvanizing
Epoxy & Fbe Coating
Electro Polish
Draw & Expansion
Grades :Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23
Type:Seamless / Erw / Welded/ Fabricated
Range :15 NB UP TO 600 NB IN SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 etc.
Form Round, square, rectangular, hydraulic etc.
Length Single Random, Double Ranidom & Cut Length
End Plain End, Bevelled End, Treaded
Range :
0.1 mm to 100 mm thick upto 2500 mm width & upto 8000 mm length available with NACE MR 01-75s.
Stainless Steel :
ASTM / ASME SA 240 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 317L , 321 , 321H , 347 , 347 H , 409 , 410 , 410S , 430
Duplex Steel :
ASTM / ASME SA 240 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Sheet and Plates Range :
5 mm to 100 mm thick in upto 2500 mm width & upto 6000 length available with NACE MR 01-75s.
Nickel Alloy :
ASTM / ASME SB 162 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )
ASTM / ASME SB 127UNS 4400 (MONEL 400 )
ASTM / ASME SB 424 UNS 8825 (INCONEL 825)
ASTM / ASME SB 168UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 443 UNS 6625 (INCONEL 625)
ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 462 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Sheet and Plates Specifications
1)hot and coll rolled, Gr1Gr23
2)Thickness:0.3mm - 60mm
3)Length:6000mm
4)ASTM B265, ASTM 4911, F67, F136
Material :titanium and titanium alloys
Pure Titanium Grade :GR1, GR2, GR3, GR4
Titanium Alloy Grade :GR5 (6% Al, 4%V)
GR6 (5% AL, 2.5%Sn)
Gr.7 (Titanium + Pd)
Gr.9 (3% Al, 2.5%V)
Gr.10 (11.5%Mo, 6% Zr, 4.5% Sn)
Gr.11 (Titanium + Pd)
Gr.12 (0.3% Mo, 0.8% Ni)
Range:3.17 MM TO 350 MM DIA
Stainless Steel :
ASTM / ASME SA 276 TP 304 , 304L , 309S , 309H, 310S , 316 , 316L , 316 TI , 317 , 321 , 347 , 410 , 420 , 430 , 431 , 440A , B & C. , 446 ASTM / ASME SA 479 TP 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 321 , 321H , 347 , 347 H , 410, 430 , 431 & 444.
Duplex Steel :ASTM / ASME SA 276 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Range:3.17 MM TO 350 MM DIA
Nickel Alloy
ASTM / ASME SB 160 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )
ASTM / ASME SB 164 UNS 4400 (MONEL 400 )
ASTM / ASME SB 425 UNS 8825 (INCONEL 825) ASTM / ASME SB 166 UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 446UNS 6625 (INCONEL 625)
ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Grades :Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750
Sizes :1mm to 200mm diameter
Type :Bars, Rods, wire
Standard :ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE
Grades :Monel 400, Monel k500
Range :5 mm dia To 500 mm dia in 100 mm TO 6000 mm Length
Standard:ASTM / ASME SB 164
Specifications :Titanium round bar
Grade:Gr1, Gr2, Gr3, Gr5, Gr7
Standard:ASTM B348, ASTM F136, ASTM F67, AMS 4928
Specification:
1. Grade :Gr1, Gr2, Gr4 , Gr5, Ti-6AL4V ELI, Gr.7, Gr.9, Gr.12
2. Standard :ASTM B348, ASTM F136, ASTM F67, AMS 4928
3. Size:Diameter : 4mm to 350mm, Length: 50mm to 6000mm
4. Payment :T/T or L/C at sight
5. MOQ :10 kg
6. Package :Ply wooden case or as request
7. Delivery time :7- 30 days after confirmed
8. Applications:industry, glasses so on.
We are the manufacturers of Stainless Steel Angles.
If you require stainless steel Angles, contact us and one of our representatives will be happy to help you order just what you need. We are also available to answer questions you may have about our Stainless Steel Angles or any of our other products.
Size | AV. Weight | |||||||||||
In mm | KG / MTR. | KG / FT | ||||||||||
20 x 20 x 3 | 0.90 | 0.27 | ||||||||||
25 x 25 x 3 | 1.10 | 0.34 | ||||||||||
25 x 25 x 5 | 1.80 | 0.55 | ||||||||||
25 x 25 x 6 | 2.10 | 0.64 | ||||||||||
30 x 30 x 3 | 1.40 | 0.43 | ||||||||||
30 x 30 x 4 | 1.08 | 0.54 | ||||||||||
30 x 30 x 5 | 2.2 | 0.87 | ||||||||||
30 x 30 x 6 | 2.5 | 0.77 | ||||||||||
35 x 35 x 3 | 1.60 | 0.49 | ||||||||||
35 x 35 x 4 | 2.10 | 0.64 | ||||||||||
35 x 35 x 5 | 2.60 | 0.79 | ||||||||||
38 x 38 x 3 | 1.70 | 0.52 | ||||||||||
40 x 40 x 4 | 2.40 | 0.73 | ||||||||||
40 x 40 x 5 | 3.00 | 0.91 | ||||||||||
40 x 40 x 6 | 3.50 | 1.07 | ||||||||||
50 x 50 x 3 | 2.3 | 0.69 | ||||||||||
50 x 50 x 4 | 3.00 | 0.91 | ||||||||||
50 x 50 x 5 | 3.80 | 1.16 | ||||||||||
50 x 50 x 6 | 4.50 | 1.37 | ||||||||||
65 x 65 x 5 | 4.90 | 1.49 | ||||||||||
65 x 65 x 6 | 5.80 | 1.77 | ||||||||||
65 x 65 x 8 | 7.70 | 2.35 | ||||||||||
65 x 65 x 10 | 9.40 | 2.86 | ||||||||||
75 x 75 x 5 | 5.70 | 1.74 | ||||||||||
75 x 75 x 6 | 6.80 | 2.07 | ||||||||||
75 x 75 x 8 | 8.90 | 2.71 | ||||||||||
75 x 75 x 10 | 11.00 | 3.35 | ||||||||||
90 x 90 x 6 | 8.20 | 2.71 | ||||||||||
90 x 90 x 8 | 10.80 | 3.29 | ||||||||||
100 x 100 x 6 | 9.20 | 2.80 | ||||||||||
100 x 100 x 8 | 12.10 | 3.69 | ||||||||||
100 x 100 x 10 | 14.90 | 4.54 | ||||||||||
100 x 100 x 12 | 17.70 | 5.40 | ||||||||||
Supply Conditions |
— Hot Rolled Straightened & Pickled — Hot Rolled Straightened, Solution Annealed & Pickled (HRAP), Shot Blasting Finish — Hot Rolled, Straightened , Pickled & Ground — Cold Drawn Flat Bars |
If you require stainless steel Angles, contact us and one of our representatives will be happy to help you order just what you need. We are also available to answer questions you may have about our Stainless Steel Channels or any of our other products.
Length:6m or according to the clients request
Type:Channel steel
Material:201, 202, 301, 304, 304L, 309S, 310S, 317L, 316, 316L, 321, 430, etc.
Standard:ASTM, AISI, GB, JIS, DIN
Products | Size Range | Specifications | Supply Conditions | Tolerance |
Channels |
50.80 x 25.40 x 4.76 mm 50.80 x 25.40 x 6.35 mm 75 x 40 x 4.7 x 6.9 mm 76.20 x 38.10 x 6.35 mm 80 x 40 x 6 mm 80 x 45 x 6 x 8 mm 100 x 50 x 6 x 8.5 mm 101.60 x 40.13 x 4.57 mm 101.60 x 43.69 x 7.93 mm 101.60 x 44.45 x 6.35 mm 130 x 65 x 6 x 6 mm 152.40 x 48.77 x 5.08 mm |
EN, DIN, ASTM, AISI, ASME, JIS, |
---|
Square Mesh, Oblong, Hollander Weave/Dutch Twill Weave/Satin Twill Weave in Course and Fine mesh as per tyler and customer specification in Stainless Steel, Brass, Copper, Nickel, Monel etc.
Mesh/Inch | Wire Gauge SWG | Aperture mm |
3 | 14 | 6.27 |
4 | 16 | 4.27 |
5 | 18 | 3.86 |
6 | 18 | 3.04 |
8 | 20 | 2.26 |
10 | 20 | 1.63 |
20 | 30 | 0.95 |
30 | 34 | 0.61 |
40 | 36 | 0.44 |
50 | 38 | 0.36 |
60 | 40 | 0.30 |
80 | 42 | 0.21 |
100 | 44 | 0.172 |
120 | 44 | 0.13 |
150 | 46 | 0.108 |
160 | 46 | 0.097 |
180 | 47 | 0.09 |
200 | 47 | 0.077 |
250 | 48 | 0.061 |
280 | 49 | 0.060 |
30 | 49 | 0.054 |
350 | 49 | 0.042 |
400 | 50 | 0.0385 |
Width: 0.6m-1.5m |
A LEADING MANUFACTURERS OF PERFORATED SHEETS Typical Pitch Configuration
A major part of our service work is the supply of perforated plate to the local industry. Clients are free to specify their own unique requirement, as we offer in house manufacture of perforated plate. Prior to doing so, clients need to take the following into account: Perforated Metal Check List
|