S S Technomed Pvt. Ltd.

Kasna, Greater Noida, Uttar Pradesh

Alarms
• Skin temp  low / high  • Probe failure   • Low battery  • Power failure • System Failure  • Timer
In case of high temperature i.e. above 380C, heater automatically cuts off thus ensuring baby’s safety.
Can be used on manual mode as well.

Collapsible Stainless Steel Stand
With 2/4 no. gas springs for ambulance and in hospital transport purposes. Gas spring system allow the stand to collapse when the lever is pulled and trolley is pressed from both the sides.

Easy  Access
Quick and easy access through the side access door and front port holes. The side door folds down and the matteress retracts out  from the hood to access for  emergency procedures. The door and tubing ports  offer ventilator tubing support .Infant restraint strap attached to the baby bed.

Power Source
Transport incubator  operates on AC or DC power using AC when available or switching to its internal battery when necessary
Battery : The batteries used in the system are 12 volt 18ah. Sealed maintenance free VRLA batteries.
Charge Time : 8-10 hrs. per battery from full discharge.
Hood options : Standard single wall / double wall hood (on demand).
Chassis Body : Plastic (fibre) to shock proof the system

Standard Features
• Single wall Hood • Skin temperature probe / Air temp. Probe  • 2 access doors  •  1 baby belt • Collapsible trolley

Optional
• Examination lamp • 2 disposable infant restraint straps • 1 iris port  • 6 tubing ports • Accessory shelf • Suction, Oxygen cylinder, pressure regulatory assembly, Flow Meter, Remote Controlled movement of the Trolley.

Control Displays

Dimensions in inches (Approx.)

Control Panel
The TianaTM – D 2 open care system comes with automatic manual and baby (Servo) modes. Big separate display for both skin and air temperature. Display can be converted from °C to °F by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full panel of alarms provides safety and convenience, with both audible and visual indicators in the event of:

• High Temp./ Low Temp.        • Power Failure             • System Fail              •   Timer -On
• Probe Failure             • Heater fail/ON (Optional) only visual alarm provided

Heater Assembly
The heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica/ Quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swivelled in either direction for taking X-ray and doing procedures. The Heater is also equipped with LED Phototherapy on both side to provide light intensity effective on the baby bed

Air Mode (Optional)
The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 39°C irrespective of what the skin temperature is at the time of event.

Manual Mode
The system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.

Baby Bed
The spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient. Optional: X-Ray facility is provided below the baby bed for taking X-ray of the baby without disturbing

Led Phototherapy
Tiana D comes with choice of highly efficient and bright 12/15 choice of LEDs on each side of the heater. The strong lux of 24/30 LEDs cure jaundice in baby rapidly.

Infant Resuscitator
The range of flow adjustment is 5LPM–15LPM.
The MAX-P and PIP are safe, controlled and accurate. The PEEP is constant and accurate.

• Simple operation and flexible application.

Inbuilt Printer
Manual printer fitted in the unit gives you real time printout of the event when required by pressing the switch on the control unit.

Optional
• Resuscitator • Suction • Oxygen

Technical Specification

If needed the unit can be programmed by the user itself for any of the following features:
(a) Count Up / down Timer.
(b) Check baby Alarm. (OPTIONAL).
(C) Pre warming mode

• Two function control modes provide the clinician more flexibility while optimizing the thermal environment.
• In addition the skin temperature is display is larger than the set / air temperature display.
• The removable heater and control unit make it easy to clean and service.
• Full visibility & accessibility of the baby is provided by the designed of acrylic hood.

A full complement of alarm provides safety convenience, with both audible and visual indicators :

• Probe Failure
• Power Failure
• High Temperature
• Low Temperature
• Skin Temperature display can be converted from  C to F by push of a button.
• A big LCD is provided for more specific information & visualization of the heater power in different modes.
• The High & Low Temperature alarm setting can be adjusted according to the patient condition.
• Humidification is provided with the help of two water trays provided at the back of the unit.
• Three side trays provided at the bottom of the unit to keep consumables.
• The  unit rests on four big castors with brakes in the front castors.

Optional : Oxygen Delivery System, Electric Slow Suction, CFL Phototherapy

We have experience in manufacturing the best medical equipment for the healthcare organizations. We design baby bassinets for total stability having securely welded support rods. Our baby bassinets have four-sided rail to prevent supplies from falling off and a shelf for linen and changing supplies. We are the leading manufacturers of baby bassinets. We manufacture baby bassinets having 3-inch swiveling casters to allow supremely easy transportation. Our brand provides secure movement of the baby and the product without any jerk. We make sure that safety of the baby is kept in mind at first while manufacturing the baby bassinets.

Infant Baby Trolley at Best Price in Kenya.
A baby is precious not only to the parents but to everyone and it becomes the responsibility of the healthcare organizations to take wise steps to ensure the safety of the newborns. Our best Infant Baby Trolley comes with a shelf and a carriage that provides an amazing workspace. We make sure that our clients leave with a satisfying smile. We have built the trust of thousands of healthcare units for being supreme manufacturers of medical equipment for years. Our reputation states our story. We are the best manufacturers of the medical equipment in the market.

Control Panel
The TianaTM – D open care system comes with automatic manual and baby (Servo) modes.
In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted form OC  to OF by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full panel of alarms provides safety and convenience, with both audible and visual indicators in the event of:
•  High Temp./ Low Temp.    • Power Failure
•  System Fail                          •  Timer -On
• Probe Failure                       • Heater fail / ON (Optional) only visual alarm provided

Heater Assembly
The heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica/ quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swivelled in either direction for taking X-ray and doing procedures. The Heater is also equipped with LED Phototherapy on both side to provide light intensity effective on the baby bed

Air Mode (Optional)
The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 390C irrespective of what the skin temperature is at the time of event

Technical Specification

Additional Features
If needed the unit can be programmed by the user itself for any of the following features:
(a)  Count Up / down Timer.
(b)  Check baby Alarm. (OPTIONAL).
(C)  Pre warming mode

Manual Mode
The system automatically starts heating from 40% in manual mode and the same can be changed through settings Up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.

Baby Bed
The spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient. Optional: X-Ray facility is provided below the baby bed for taking X-ray of the baby without disturbing

Led Phototherapy (Optional)
Tiana D comes with choice of highly efficient and bright 12/15 choice of LED’s on each side of the heater. The strong lux of 24/30 LED’s cure jaundice in baby rapidly

Technical  Specification
Light Source :- High Bright Blue/Whit LED’s
Wavelength : – 450-470µm.
Irradiance    : – < 35 µw/cm/nm.

Control Panel

The TianaTM – DX Open care System comes complete with automatic manual and baby (Servo) modes.

In addition, the Skin/Air temperature display is larger than other set temperature display. Skin temperature display can be converted form OC  to OF by the push of a button. A big LCD is provided for more information and visualizations of the heater power in manual and servo modes. A full complement of alarms provides safety and convenience, with both audible and visual indicators in the event of :• High Temp./ Low Temp.  • System Fail   • Probe Failure • Power Failure • Timer • Heater fail / ON (Optional) only visual alarm provided

Heater AssemblyThe heater assembly located above the centre of the support structure consists of an integral examination light and a 650 watts heating system (Silica or quartz /Ceramic Heater) for quick warming and even distribution of heat on the baby bed. The heater can be swiveled in either direction for taking X-ray and doing procedures.

Air Mode (Optional)The system comes with air sensor. This is added security cover with exclusive feature of switching OFF the heater in case the AIR temperature goes above 390C irrespective of what the skin temperature is at the time of event.

Manual ModeThe system automatically starts heating from 40% in manual mode and the same can be changed through settings up to 100%. The system automatically converts from servo mode to manual mode in case of probe failure thus providing nonstop working of the unit.

Baby BedThe spacious baby bed incorporates easy drop down/ fold down glasses for maximum access to the patient.Optional : X-Ray facility is provided below the baby bed for taking X-ray of the baby without disturbing. The First BreathThe open care system combines virtually all the technology a caregiver may need in situation needed for resuscitation. The neonate can be supplied with a constant oxygen flow through the oxygen humidifier when connected to an oxygen cylinder/wall unit. The motorized slow suction can be used with a simple flip of a switch. A digital apgar time is standard, which signals when 1, 5 and 10 minutes have elapsed.

CastorsThe system is fitted with 4″ high quality castors having brakes in front 2 castors.  Optional : antistatic castors

StorageThe unit comes fitted with two drawer system which slides out for keeping consumables.

Phototherapy Unit (Optional)The unit can be fitted with LED phototherapy unit or CFL under surface phototherapy unit.

Additional FeaturesIf needed the unit can be programmed by the user himself for any of the following features:(a) Count Up / down Timer. (b) Check baby Alarm.  (c) Pre warming mode.

Technical Specification

his product.

Healthcare Industry:

• Oxygen Machine can fully meet the demand for oxygen in the following circumstances and offer you the real safe, effective and comfortable oxygen therapy.
• Respiratory disease, such as chronic bronchitis, bronchial asthma, emphysema, pulmonary, heart disease, pneumoconiosis, silicosis, and so on.
• Cardio cerebral  vascular diseases, such as high blood pressure, arteriosclerosis’s coronary heart disease, myocardial infarction, heart rate disorders, angina cerebral thrombosis, cerebral apoplexy, and so on .

Ozone Industry:Oxygen Machine can produce oxygen of concentration over 90% on the spot, increase ozone concentration of the ozonizer twice than the air source, lower electricity consumption by half and greatly reduce the overall cost. It’s suitable for drinking water industry like mineral water and purified water. Producers, food industry and pharmaceutical industry which have relatively higher requirement of ozone concentration.

Beauty Industry:Oxygen Machine uses professional oil-free compressors. The fresh oxygen generated from it is of high purity and without any chemical or stimulating ingredients. It’s genuine healthy oxygen and suitable.

For all who care for their look. No matter you do deep skin care at a beauty salon, or do aerobics at a gymnasium, or use simple face film at home, it is an effective auxiliary beauty treatment.

Technical Specifications

BabyBassinet
Baby Bassinet with A big shelf at the . bottom for keeping consumables.

Infant Resuscitator

• It is mainly used on delivery room, baby wards, NICU that the babys maximum weight up to 10 KG.
• Adjust the Oxygen concentration from 21% to 100%
• The MAX-P and PIP are safe, controlled and accurate.
• The PEEP is constant and accurate.
• Simple operation and flexible application.
• The output pressure would not be influenced by the
  operator experience, training, attention and fatigue.

Technical parameter

• Pressure gauge: -2100cmH20)
• MAX-P: @015LPM 5kPa (60cmH20)
• PIP: @515LPM 0.27kPa (257cmH20)
• PEEP: @515LPM 0.033kPa (0.323cmH20)

The First Breath
The non motorized slow suction can be used with a simple oxygen flow through the oxygen humidifier when connected to an oxygen cylinder/wall un

Optional
Oxygen Cylinder

Characteristics:

• It is convenient to use because of its small size.
• The battery is chargeable(3.7V) that convenient to carry.
• Stable performance and high precision.
• Cheap and practical.
• Technical parameter:
• Oxygen concentration: 21%-100%
• Power: DC 9V/DC 3.7V
• Use life of oxygen sensor: 2 year
• Low battery alarm.

Incubator for Veterinary use

Infant Resuscitator

• It is mainly used on delivery room, baby wards, NICU that the baby’s maximum weight up to 10KG.
• Inside an alarm system of differential pressure. When alarming, the safety valve starts automatically and produces the mixture gas continuously to ensure the safety of patients.
• Adjust the Oxygen concentration from 21% to 100% optionally
• The range of flow adjustment is 5LPM15LPM.
• The MAX-P and PIP are safe, controlled and accurate.
• The PEEP is constant and accurate.
• Simple operation and flexible application.
• The output pressure would not be influenced by the operator experience, training, attention and fatigue.

Technical parameter:

• Pressure gauge : -210kPa (-20100cmH2O).
• MAX-P : @015LPM ≤6kPa (60cmH2O).
• PIP : @515LPM 0.25.7kPa (257cmH2O).
• PEEP : @515LPM 0.032.3kPa (0.323cmH2O).

Medical Air Compressor:

• Delivers dry, clean medical-grade compressed air
  
• Optional cost-performance ratio
  
• Quiet performance suitable for use in any ICU / NICU
  
• It can be used either as a primary air source as a primary air source or as an automatic backup to a hospital’s air pipeline system for medical ventilator and Neonatal bubble CPAP units

Product Features:

• High Flow capabilities for greater Versatility.
  
• Oil- Free compressor motor with thermal cutout.
  
• Automatic water removal system.
  
• Large locking castors for easy transport.
  
• Adaptable with any ventilator
  
• Simple and economical maintenance
  
• Consistent performance in all conditions.
  
• Low Power consumption.

Medical Air Compressor:

• Delivers dry, clean medical-grade compressed air
  
• Optional cost-performance ratio
  
• Quiet performance suitable for use in any ICU / NICU
  
• It can be used either as a primary air source as a primary air source or as anautomatic backup to a hospitals air pipeline system for medical ventilator andNeonatal bubble CPAP units

Product Features:

• High Flow capabilities for greater Versatility.
  
• Oil- Free compressor motor with thermal cutout.
  
• Automatic water removal system.
  
• Large locking castors for easy transport.
  
• Adaptable with any ventilator
  
• Simple and economical maintenance
  
• Consistent performance in all conditions.
  
• Low Power consumption.

Our company is ranked amongst the distinguished Manufacturers and Exporters of Ambu Bag from Uttar Pradesh, India. The Ambu Bag offered by us is fabricated in our fully equipped facility and in adherence to set industrial parameters. We are capable of delivering small or bulk orders of Ambu Bag. We are offering Ambu Bag to our valued buyers’ across the world at most minimal rates.

Details :

• Rugged 100% Autoclavable
• Reusable 500ml Silicone below
• Non Rebreathing valve with 40cm of H₂O pressure release
• Mask size - No. 01
• PVC Oxygen Reservoir & oxygen tubing.

Thus-by reducing the risk of puncturing the body many a times, while giving the IV or an injection or collecting a blood sample. In all the cases the patient or the user is happier because it reduces the risk of injecting the veins falsely. The safest LEDs which do not have the UV or infrared radiation are used for this purpose. Vein Trace could be used to map the veins all along the limbs without any difficulty. The specific wavelength RED LEDs used emits the light and thus the veins are clearly visible to the naked eye.

Specifications

• Number of RED LEDs : 6
• 8 volts rechargeable battery pack.
• Charger for charging the device operating voltage: universal.
• Dimensions: 50 x 16 x 160 mm
• Weight: 120 grams

User manual:
Please follow the instruction as follows

1. See whether the charge is full by switching on the unit (never look into the Light source directly).

2. If fully charged place the Vein Trace on the arm or limb as per the convenience and just push along the skin to trace the veins very easily. The optional holding band supports the user hand to use it comfortably.

3. The “U” shaped gap is where the vein is to be traced.

And thus the syringe is to be pushed into the vein without many trials. There are no clinically proven side affects with the Vein Trace and the LED. But general precautions are to be taken while using the same.

1. Never look into the LEDs (light source) directly
2. Do no operate the unit continuously for more than 5 minutes
3. Switch off the unit whenever not in use.
4. Charge the unit for 3 hours before first use.
5. Remove the charger from the mains always to save the power
6. Never connect to the charger and used the Vein Trace as it could lead to accidents.
7. Do not clean the transparent protective cover on the LED with any kind of solvents or strong detergents. Wipe it with soft and damp cloth only.

We make sure that the quality of the raw materials is of par excellence so that the finished goods will be faultless. Thus, we source the inputs only from trusted vendors. Thanks to our immense expertise of the domain, we as a Supplier, strives to deliver nothing short of excellence to our customers.

Specification : Single piece Polycarbonate & silicon adjustable oxygen hood

Our organization has observed impressive rise as Infant Resuscitator (RESP-17) supplier, courtesy our ability to fulfill to wholesale demands without hassle. Backed by a capacious warehouse, we can easily undertake urgent and massive orders of the clients. Also, we ensure complete security of the products.

Infant Resuscitator

• It is mainly used on delivery room, baby wards, NICU that the baby’s maximum weight up to 10KG.
• Inside an alarm system of differential pressure. When alarming, the safety valve starts automatically and produces the mixture gas continuously to ensure the safety of patients.
• Adjust the Oxygen concentration from 21% to 100% optionally
• The range of flow adjustment is 5LPM15LPM.
• The MAX-P and PIP are safe, controlled and accurate.
• The PEEP is constant and accurate.
• Simple operation and flexible application.
• The output pressure would not be influenced by the operator experience, training, attention and fatigue.

Technical parameter:

• Pressure gauge : -210kPa (-20100cmH2O).
• MAX-P : @015LPM ≤6kPa (60cmH2O).
• PIP : @515LPM 0.25.7kPa (257cmH2O).
• PEEP : @515LPM 0.032.3kPa (0.323cmH2O).
• RESP-17 : cover with inbuilt Air/oxygen blender.

We have a strong security system that helps us to make online transactions possible without getting worried about the security. You need to share your details with us and we make sure that the details are kept confidential. We are reckoned as the noted Supplier of Single Surface Overhead CFL Phototherapy Unit as we are capable of meeting the exact requirements of the buyers.

Details :

• Mobile Stand with height adjustment facility along with easy swiveling of source box. Unit can be used along with Infant Care Trolley, Radiant Warmerand Incubator
• 4 Special Blue CFL Tubes.
• 2 Daylight CFL Tubes.
• Digital Timerfor Lamp Usage Hour and Patient Exposure.
• Source Cooling Fan, Mirror Coated Reflector
• Stand movable on Castors.
• Optional - The system can be fitted with LCD timer which gives alarm when tube needs replacement.

Baby Bassinet :

• Clear Collapsible fold down side panels
• Baby Tray with Transparent base for Undersurface Phototherapy usage.
• Lower Shelf
• Movable Castors
• Undersurface LED Phototherapy
• Same as over head placed under the bassinet.

Optional :

• LCD Digital Timer for lamp usage hours and patient exposure
• X-ray Cassette guide facility.

We are based in Ghaziabad(India) and ensure to make available the entire range of products to any required destination. Our well-structured warehouse is properly maintained and installed with diverse amenities required for the safe storage of the products. Moreover, we keep on updating the unit for enhanced safety.

Detail : In the new born baby i.e birth to one month, jaundice can pose a serious problem, because high level of the bilirubin can permanently damage the brain. The indirect bilirubin, which is not water soluble can be decomposed to a harmless metabolic, which is water soluble, does not cross blood brain barrier and is rapidly excreted in the bile and urine and so does not accumulate. This is achieved by exposing the infant to bright light ( approx, 4, 5 micro watts/sq, cm/mm) in the range of 420 to 480 mm wave length.

About CFL Phototherapy : The CFL Phototherapy Unit occupies very little bed side space providing ease during observation. The unit is mobile, mounted on 4 castors i.e 2 with brakes & 2 without brakes. The base of the unit conveniently goes beneath a bed or a trolley and can also be adjusted with the warmer/Incubaton The Chokes are fitted at the base to decrease the heat generation in the tube unit thus giving an added protection to the unit.

Compatibility : The tube unit can be adjusted up/down by the mechanism provided in the pillar: Protection is provided against free fall of the unit by adding a big screw at the back, thus making it compatible to fit over an incubator or baby cot etc,

Baby Bed (Comes with undersurface Phototherapy Unit) : Baby bassinet comes with fold down / drop down panels and a big shelf. Facility of head down position on both sides is also given. Under surface phototherapy unit has 4 blue & 2 white CFL and is fitted at a distance of 300mm from baby bed (adjustment level is optional).

CFL Module : The lamp unit is made of light weight Material, has 4nos of blue light tubes with higher intensity of light in therapeutic range and 2 nos of white light tubes. CFL tubes last longer than ordinary tube light, requires less frequent replacement (subject to working conditions), The unit is fitted with special mirror coated reflectors for better reflection. Also has fold up facility during inspection of neonates or storage and angle folding facility for using along with radiant warmer,

Heat Dissipation : A fan is provided at the top cover for efficient heat dissipation with concealed wiring inside the unit.

Optional Accessories :

• l.V.Stand(adjustable).
• Digital hour meter with dual display of hours i, e. one for the total tubes usage & other for individual baby usage with reset facility.
• Automatic voltage corrector with high & low voltage cut off

With stern quality analysis of the raw materials and other inputs used, we make certain that the final product is absolutely free from defects. For this, we make use of the updated technology and machines. We have trustworthy and well-organized shipping facilities available, along with this, we keep a record of the same as well, and this increases our efficiency and gains the trust of the customers.

Details

• It can match with imported and domestic ventilator, CPAP for heating and humidifying.
• It is constant and reliable because of its microprocessor and contact-less control
• Ergonomic design can utilize the space effectively.
• It is convenient to monitor by digital display.
• It controls the temperature automatically and equipped with over heat protection device.
• The maximum temperature of heating plate is not more than 85^oC.
• It controls the temperature automatically in the range 28^oC to 40^oC.
• The accessories of device clean with conventional disinfectant, high pressure sterilization.

DESCRIPTION

• It is constant and reliable because of its microprocessor and contact-less control.
• Ergonomic design can utilize the space effectively.
• It is convenient to monitor by digital display.
• It controls the temperature automatically and equipped with over heat protection device.
• The maximum temperature of heating plate is not more than 85 °C.
• It controls the temperature automatically in the range 28 °C to 40 °C.
• The accessories of device clean with conventional disinfectant, high pressure sterilization.

We own a substantial storage space that is well-structured and maintained by the professionals. The final packaging and storing of the products is done after complete serialization to avoid last minute hassle. We settle the financial transactions with our customers through the secured payment procedures. We also settle down upon a variety of negotiable instruments.

Details

• It can match with imported and domestic ventilator, CPAP for heating and humidifying.
• It is constant and reliable because of its microprocessor and contact-less control
• Ergonomic design can utilize the space effectively.
• It is convenient to monitor by digital display.
• It controls the temperature automatically and equipped with over heat protection device.
• The maximum temperature of heating plate is not more than 85^oC.
• It controls the temperature automatically in the range 28^oC to 40^oC.
• The accessories of device clean with conventional disinfectant, high pressure sterilization.

Introducing ultraviolet Sterilizer a product manufactured from state of the art technology for sterilizing the air within the sterilization chamber. An ultraviolet ray is a band of light with short wavelength from 2000 to 2950 angstrom units which posses the greatest germicidal effects of all ultraviolet wavelengths, particularly the wavelengths of 2537 angstrom units. It is extensively used to destroy airborne bacteria, virus, mould pores etc.
Ultraviolet sterilizer can be kept on even during the operations as special measures are taken to save against direct radiation, this unit can be mounted on Wall, Kept on the Table or kept at a Suitable Place.

Five Steps of Sterilization

• Step-I Dust Filter
• Step-II 15 Micron Filter
• Step-Ill Carbon Fitter (Optional)
• Step-IV U. V. Filter
• Step-V Ionizer (Optional)

Medical Air Compressor:

• Delivers dry, clean medical-grade compressed air
  
• Optional cost-performance ratio
  
• Quiet performance suitable for use in any ICU / NICU
  
• It can be used either as a primary air source as a primary air source or as an automatic backup to a hospital’s air pipeline system for medical ventilator and Neonatal bubble CPAP units

Product Features:

• High Flow capabilities for greater Versatility.
  
• Oil- Free compressor motor with thermal cutout.
  
• Automatic water removal system.
  
• Large locking castors for easy transport.
  
• Adaptable with any ventilator
  
• Simple and economical maintenance
  
• Consistent performance in all conditions.
  
• Low Power consumption.